• Transactions of the Korean hydrogen and new energy society
• /
• v.9 no.3
• /
• pp.93-100
• /
• 1998

The ortho-para $H_2$ catalytic conversion equipment has been developed to reduce the evaporation loss from stored liquid hydrogen. The ortho-para $H_2$ conversion heat is evaluated at liquid nitrogen temperature. This problem is of particular interest in the design of the ortho-para $H_2$ converter in a hydrogen liquefaction system. The ortho-para $H_2$ conversion equipment consists of a catalytic converter, a precooler, and a liquid nitrogen bath. 30-90 cc of $Fe(OH)_3$ are employed as a catalyst in the present converter. The conversion heat and conversion effectiveness are evaluated when mass flow rate of hydrogen is in the range of 0.05-l.6 g/min. It is found that the ortho-para conversion heat is increased while conversion effectiveness is decreased as the mass flow rate of hydrogen is increased. Both the ortho-para conversion heat and conversion effectiveness are increased with an increase in the amount of the catalyst.

• Progress in Superconductivity and Cryogenics
• /
• v.10 no.3
• /
• pp.1-4
• /
• 2008

For the effective evaluation of superconducting properties of a coated conductor, with a long length, a non destructive characterization technique including a reel-to-reel (R2R) Hall measuring system have been developed. A non-contact R2R Hall sensor array system was particularly designed to measure the superconducting property of coated conductors. The superconducting properties of long length coated conductors were measured by using this device. It was demonstrated that this system was convenient to measure the intensity and distribution of the magnet field applied perpendicular to the surfaces of the coated conductors. Using this device, the defect and low critical current density(Jc) area of coated conductors could be detected in real-time measurement.

• Korean Journal of Environmental Biology
• /
• v.21 no.3
• /
• pp.271-275
• /
• 2003

The direct count and MPN (Most Probable Number) methods were used to measure the number of nematodes in soils collected from cultivated and non-cultivated fields. As a result, the number of nematodes from cultivated soils was higher than the non-cultivated soils (NC -1, NC -2). On the other hand, upon measuring the value from the organo farming cultivated soils (OC, OR) and conventional cultivated soils (CC, CR), the former showed 16 times higher than the latter. These results indicate that nematode population which can multiply in the organic compounds abundantly exist in the organo farming cultivated soil. Isolated entomopathogenie nematodes are composed of two orders, which were Rhabditida and Diplogasterida. To determine the pathogene-city of them using the 5th larvae and pupae silkworm, and the following mean $LD_{90}$ values were found: 24 to 30 hours in Rhabditida and 36 to 48 hours in Diplogasterida nematode, respectively. This study indicates that nematodes are sensitive to this kind of environmental disturbance. Isolated entomopathogenic nematodes were suggested that aye quite within the realms of possibility for biological control agents.

• Journal of the Korea Convergence Society
• /
• v.8 no.11
• /
• pp.63-69
• /
• 2017

The middleware in the IoT system is software that acts as a messenger to connect and exchange data between humans and objects, objects and objects. IoT middleware exists in various forms in all areas, including hardware, protocol, and communication of different kinds, which are different in form and purpose. However, IoT middleware exists in various forms across different areas, including hardware, protocol, and communication of different types and purposes. Therefore, even if the system is designed differently for each role, it is necessary to strengthen the security in common. In this paper, we analyze the structure of IoT middleware using Service Oriented Architecture(SOA) approach and design system security requirements based on it. It was defined: Target Of Evaluation(TOE) existing system development method and the object is evaluated by Common Criteria(CC) for verification based otherwise. The proposed middleware system will be correlated with the security problem definition and the security purpose, which will be the basis for implementing the security enhanced IoT system.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.371-378
• /
• 2003

The compression index of clay distributed in the west and south coast of the Korean Peninsula had been studied. Compression index was obtained from the conventional consolidation test, and was conducted accordingly to obtain the field virgin compression curve by means of Schmertmann's graphical correction. To examine a correlation closely between physical properties of soils($e_o$, LL, w) and compression index(Cc), linen. and non-linear regression analysis were employed based on the data collected from tests. The conclusions are as follows. The compression index obtained by means of Schmereann's graphical correction is about 1.16 times for the value of original oedometer test curve for U/D samples. Non-liner regression curve was preferable to establish a correlation equation rather than linear regression curve. All derived equations so far achieved have been summarized and given. However, linear equation is better for practical use so that part by part simplified linear equations were also suggested alternatively together with their own non-linear regression curve.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.3
• /
• pp.613-628
• /
• 2019

In-Vehicle Infotainment provides navigation and various functions through the installation of the application. And infotainment is very important to control the entire vehicle by sending commands to the ECU. Infotainment supports a variety of wireless communication protocols to install and update applications. So Infotainment is becoming an attack surface through wireless communcation protocol for hacker's access. If malicious software is installed in infotainment, it can gain control of the vehicle and send a malicious purpose command to the ECU, affecting the life of the driver. Therefore, measures are needed to verify the security and reliability of infotainment software updates, and security requirements must be derived and verified. It must be developed in accordance with SDL to provide security and reliability, and systematic security requirements must be derived by applying threat modeling. Therefore, this paper conducts threat modeling to derive infotainment update security requirements. Also, the security requirements are mapped to the Common Criteria to provide criteria for updating infotainment software.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.6
• /
• pp.109-117
• /
• 2011

We can use document issuance services provided by a school, bank, hospital, company, etc. either by visiting those facilities or by simply visiting their Web sites. Services available through the Internet allow us to use the same services as we do by actually going to those facilities at home or office any time. As much as it saves us time and money, there also arises a problem of information being forged on the Internet or on a printed document. There has to be security functions to deal with the problem. This paper intends to think of the possible security threats and draw out the necessary security functions that an on-line document issuance system should have based on the CC v3.1, so that anyone can use it as reference when they evaluate or introduce the system.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.6
• /
• pp.111-125
• /
• 2010

There is a growing interest in "smart grid" technology, especially after the government recently announced "low-carbon green-growth industry" project. A smart grid uses "smart meters", which can be deployed in any power-consuming places like homes and factories. It has been shown that smart meters have several security weaknesses. There is, however, no protection profile available for smart meters, which means that safety with using them is not guaranteed at all. This paper analyzes vulnerabilities of smart meters and the relevant attack methods, thereby deriving the security functions and requirements for smart meters. Finally, we propose a protection profile based on Common Criterion v3.l for smart meters.

• Journal of the Korea Convergence Society
• /
• v.12 no.5
• /
• pp.17-22
• /
• 2021

Eco-friendly magnesium-air battery is a kind of metal-air battery known as a primary battery with a very high theoretical discharge capacity. This battery is also called a metal-fuel cell from the viewpoint of using oxygen in the atmosphere as a cathode active material and magnesium alloy as a fuel. Since battery performance is determined by the properties of the magnesium alloy used as a anode, more research and development of the magnesium alloy electrode as a anode material are required in order to commercialize it as a high-performance battery. In this study, the commercialized magnesium alloys(AZ31, AZ61) were selected and then electrochemical measurements and discharge test were conducted. Electrochemical properties of magnesium alloys were investigated by OCP changes, Tafel parameters and CV measurement, and the feasibilities of AZ61 alloy with excellent discharge capacity(1410mAhg^-1) as electrode materials were evaluated through CC discharge experiments.

• Progress in Medical Physics
• /
• v.20 no.4
• /
• pp.324-330
• /
• 2009

In this study, we evaluated accuracy and usefulness of CyberKnife Respiratory Tracking System ($Synchrony^{TM}$, Accuray, USA) about a moving during stereotactic radiosurgery. For this study, we used moving phantom that can move the target. We also used Respiratory Tracking System called Synchrony of the Cyberknife in order to track the moving target. For treatment planning of the moving target, we obtained an image using 4D-CT. To measure dose distribution and point dose at the moving target, ion chamber (0.62 cc) and gafchromic EBT film were used. We compared dose distribution (80% isodose line of prescription dose) of static target to that of moving target in order to evaluate the accuracy of Respiratory Tracking System. We also measured the point dose at the target. The mean difference of synchronization for TLS (target localization system) and Synchrony were $11.5{\pm}3.09\;mm$ for desynchronization and $0.14{\pm}0.08\;mm$ for synchronization. The mean difference between static target plan and moving target plan using 4D CT images was $0.18{\pm}0.06\;mm$. And, the accuracy of Respiratory Tracking System was less 1 mm. Estimation of usefulness in Respiratory Tracking System was $17.39{\pm}0.14\;mm$ for inactivity and $1.37{\pm}0.11\;mm$ for activity. The mean difference of absolute dose was $0.68{\pm}0.38%$ in static target and $1.31{\pm}0.81%$ in moving target. As a conclusion, when we treat about the moving target, we consider that it is important to use 4D-CT and the Respiratory Tracking System. In this study, we confirmed the accuracy and usefulness of Respiratory Tracking System in the Cyberknife.