• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제15권4호
• /
• pp.265-269
• /
• 2009

정형명세기법은 안전최우선시스템 소프트웨어의 안전성을 일정 수준 이상 보장할 수 있는 기법으로서, 원자력 발전소의 디지털 제어시스템의 개발에 사용되고 있다. 정형명세기법 NUSCR로부터 Programmable Logic Controller(PLC) 시스템을 구현하기 위한 소프트웨어인 Function Block Diagram(FBD) 프로그램을 자동으로 생성하는 기법[1]이 개발되었으나, 이를 지원하는 자동화 도구가 없어 이 기법이 널리 사용되지 못하였다. 본 논문에서는 이어 자동생성 기법을 지원하기 위하여 개발된 자동화 도구 NuSCRtoFBD를 소개한다. 본 연구에서 제안하는 NuSCRtoFBD 도구를 사용하여 NuSCR로부터 FBD를 자동생성 함으로써, 기존의 수동 프로그래밍 작업에서 발생했던 다수의 오류들을 줄일 수 있다.

• 한국기계가공학회지
• /
• 제10권5호
• /
• pp.72-78
• /
• 2011

Currently, for the damper case, the material produced by cast/forge welding is mechanically processed and then the final product is mass-produced. By cutting the cast/forge welded material, the issues of excessive cutting time, multiple process production, and a large amount of chips (40% loss from the original material) arise, causing increased production cost and reduced profitability. Thus, in this study, the incremental forming technology which generates no chips was applied in production. Analysis was excuted for 1st and 2nd works by change of tool diameter and working tool. For this, 3D molding and analysis were executed, which was applied to the processing the result, successful processing could be achieved through a few trials of molding processing according to tool forming and rotation counts.

• 한국정보처리학회논문지
• /
• 제6권11호
• /
• pp.2965-2980
• /
• 1999

There are several models and the corresponding diagrams to express software system in many kinds of viewpoints, but these are supposed to be integrated and implemented into only one system. Therefore, the software modelers should have the models ensuring the consistency between information in software development life cycle. To support the robust models for modelers using OO modeling methods, i.e. UML, and CASE tools, the meta models of the software architecture and the consistency rules between the models are suggested in this thesis. Finally, the rules are implemented in the OO CASE tool, DEBUTO(Design By UML Tool). It supports UML1.1 notations and has visual modeling editors that enable users make their own software model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.358-360
• /
• 1997

The train control and monitoring system(TCMS) is an on board computer system in railway vehicles performing the control, supervisory and diagnostic functions of the complete train. This system replaces a lot of hardwired relays and minimizes the necessaries vehicle wiring thus increasing the reliability of the train. In this paper, we proposed a software design technique of TCMS using CASE tool (SAO+). The TCMS functions are implemented in software easily programmed, using a functional block, graphic programming language. We applied the compressor air module to a case study.

• 한국정밀공학회지
• /
• 제13권11호
• /
• pp.25-31
• /
• 1996

In this paper, three different types of commercial tools -P20, NC123K and ceramic- have been used to cut austempered ductile iron(ADI). In the austempered condition the materials are hard, strong and difficult to machine. Thus, we selected a optimum tool material among three different types of used tools in machining of austempered ductile iron. It was used acoustic emission (AE) to know cutting characteristic for selected tool and investigate characteristic of AE signal according to cutting condition and relationship between AE signal and flank wear land of the ceramic tool. The obtained results are as follows ; (1) The ceramic tool among three different types of tools is the best in machining austempered ductile iron. (2) In case of ceramic tool, the amplitude level of AE signal(AErms) is mainly affected by cutting condition and it is proportional to cutting speed. (3)There have been the relationship of direct proportion between the amplitude level of AE signal and flank wear land of the tool. (4) It was observed that the value of AErms was only affected by cutting speed. Therefore it is possible to in-process detec- tion of ceraic tool's wear in case the initial value of AErms at each cutting speed decided.

• 한국전자거래학회지
• /
• 제9권3호
• /
• pp.129-144
• /
• 2004

컴포넌트 기반 개발에 사용되는 CASE 도구는 기본적으로 모델링 기능, 프로젝트 관리 기능, 그리고 구현 및 테스트 지원 기능 등이 필요하다. 본 논문에서는 컴포넌트 기반 개발 시에 사용되는 CASE 도구의 기능적 요구사항을 제시한다. 기 존재하는 컴포넌트 기반 개발 도구들로부터 도구의 기능적 요구사항을 도출하여 분석/설계, 프로젝트 관리, 구현 및 테스트, 기타 기능 지원 등으로 분류하여 제시하고, 개발관리 기능을 추가하여 컴포넌트 기반 개발을 위한 CASE 도구를 제안한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.132-140
• /
• 2009

The Cradle(R) is specialized systems engineering tool that developed by 3SL(Structure Software System Limited) that has headquarters in U.K. and U.S.A.. It is recognized as the fastest growing Computer-Aided Systems Engineering Tool(CASE Tool). We built up requirements management database by using Cradle(R) on urban maglev program in Korea. So Cradle(R) provide a network function, is available accesses of clients in external organization that is associated on urban maglev program by the internet. However the network function of Cradle(R) require an opening of some a specific network ports and may causes a decreasing network speed. In this paper, we propose the method to establish an user environment of a requirements management database that overcome constraints on network condition.

• Asia pacific journal of information systems
• /
• 제2권2호
• /
• pp.15-30
• /
• 1992

Computer-Aided Software Engineering or CASE is the technology for automating the software development and maintenance process. Many firms are turning to CASE in hopes of realizing improvement in productivity and system quality. Although expenditures on CASE were reported to be rapidly rising, the performance gains have been very difficult to measure. The empirical results in this article are intended to provide some evidence about (1) the major objective of using CASE, (2) the gains from CASE, (3) the difference in productivity among CASE tools. They are based on an analysis of data collected from 61 software engineers from five corporations who have the experience of using CASE.

• 기술사
• /
• 제27권3호
• /
• pp.3-13
• /
• 1994

• 정보기술과데이타베이스저널
• /
• 제8권2호
• /
• pp.137-159
• /
• 2001

This study provides a thorough methodology for IT Investment evaluation. A software tool to support the evaluation process was introduced along with a case study. The software supports the methodology that consists of 7 phases : Target analysis, ldentifying IT measures, Measuring IT impact, Assessing business value, Analyzing the decree of realization, Cost-benefit analysis, and Reporting. The case study showed that the software (CAFA) was a very useful tool supporting both decision-making and post-implementation reviews of IT investment.