• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.4
• /
• pp.1-10
• /
• 2017

This study investigated indoor temperature and humidity control and PM1 and PM10 mitigation effects of a single green wall (Case 1), two green walls (Case 2), and two green walls plus a waterfall (Case 3) in comparison with a control without either a green wall or waterfall. Experiments were conducted in the office of Chungbuk National University from August to September, 2015. Experiments were carried out sequentially in the order of control, Case 1, Case 2, and Case 3. Data collected from August 17 to August 20, 2015 (Experiment 1), and from August 31 to September 3, 2015 (Experiment 2), when outdoor temperature was relatively constant, were analyzed. Plant volume ratios by indoor landscaping of the control, Case 1, Case 2 and Case 3 were 0.0, 0.6, 1.2, and 1.4%, respectively. Compared to the control, average temperatures of Case 1, Case 2 and Case 3 were decreased by 0.3~0.7, 0.7~0.9 and $1.0^{\circ}C$, respectively, and relative humidity was increased by 1.8~8.7, 9.2~14.6 and 14.8~21.9%, respectively. Three hundred minutes after exposure to mosquito repellent incense particles, the ratio of the remaining PM1 of the control, Case 1, Case 2 and Case 3 were 25.0, 22.0%, 21.2%, 17.3%, respectively, in Experiment 1 and 42.3, 28.9, 23.1, and 30.9%, respectively, in Experiment 2. As indoor greening increased the effect of indoor temperature, PM1 and PM10 mitigation were greater, and temperature and humidity were lower. The greater the relative humidity was, the faster PM1 and PM10 mitigation tended to be.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.10
• /
• pp.934-940
• /
• 2011

A novel reconfigurable beam steering antenna using double loops is proposed. The double loop antenna has a superposed beam which is produced by combining the in-phase beam in the inner loop with the out-of-phase beam in the outer loop. Also, the doble loop antenna uses two artificial switches to connect between inner loop and outer loop, and has the beam directions of three separate cases(Case 1, Case 2, Case 3) by changing ON/OFF states of switches. The operation frequency of the antenna is 14.5 GHz, and three maximum beam directions of the antenna are ${\phi}_{max}=0^{\circ}$, ${\theta}_{max}=0^{\circ}$(Case 1), ${\phi}_{max}=230^{\circ}$, ${\theta}_{max}=40^{\circ}$(Case 2) and ${\phi}_{max}=130^{\circ}$, ${\theta}_{max}=40^{\circ}$ (Case 3). The peak gains of each case are 6.5 dBi(Case 1), 7.6 dBi(Case 2) and 7.8 dBi(Case 3). The half power beam width(HPBW) of each case is $86{\sim}104^{\circ}$, and the overall HPBW is $160^{\circ}$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.16-21
• /
• 2017

The aim of this study was to utilize ferronickel slag produced in the manufacture of stainless steel as a flowable backfill material for underground use using crushed fine powder. Experimental combinations were made using two components: Case A (sand) and Case B (soil). The optimal mixing ratio of Case A was sand (58.4%), ferronickel slag fine powder (21.6%), cement (1.8%), and water (18.2%). In the case of B, the optimal mixing ratio was determined to be soil (53.0%), ferronickel slag fine powder (20.0%), cement (1.7%), and water (25.3%). The uniaxial compressive strength of case A, which is a mixture of ordinary sand and ferronickel slag powder, was relatively larger than that of case B using soil. In addition, the strength of the specimen increased with increasing curing time. The uniaxial compressive strength tended to increase with increasing curing time. In addition, the unconfined compression strength of the fluid backfill material using common sand as the main material was relatively larger than that of the mixed material using soil as the main material. In case A, the uniaxial compressive strength ranged from 0.17-0.33 MPa, 0.21-0.39 MPa, and 0.19-0.40 MPa, respectively, at curing times of 7, 14, and 28 days. From the experimental results, it was concluded that the ratio of FNS powder and cement mixture was the most appropriate for Case A3. Case B, which used soil as the main material, showed a similar tendency to Case A. As a result of the dissolution test for evaluating the environmental harm of the FNS fine powder, there was no dissolution of substances harmful to the environment.

• Language and Information
• /
• v.17 no.2
• /
• pp.1-27
• /
• 2013

This paper presents a unified approach to multiple nominative and accusative constructions in Korean. We identify 16 semantic relations holding between two consecutive noun phrases (NPs) in multiple case marking constructions, and propose each semantic relation as a licensing condition on double case marking. We argue that the multiple case marking constructions are merely the sequences of double case marking, which are formed by dextrosinistrally sequencing the pairs of the same-case marked NPs of same or different type. Some appealing consequences of this proposal include a new comprehensive classification of the sequences of same-case NPs and a straightforward account of some long standing problems such as how the additional same-case NPs are licensed, and in what respects the multiple nominative marking and the multiple accusative marking are alike and different from each other.

• Journal of Computing Science and Engineering
• /
• v.3 no.1
• /
• pp.59-71
• /
• 2009

While the average-case performance is important for general-purpose applications, worst-case performance is crucial for real-time systems to ensure schedulability and reliability. Recent work has shown that simple prefetching techniques such as the Next-N-Line prefetching can benefit both average-case and worst-case performance; however, the improvement on the worstcase execution time (WCET) is rather limited and inefficient. This paper presents two instruction prefetching approaches that are specially designed to enhance the worst-case performance, including the loop-based prefetching and WCET-oriented prefetching. Our experiments indicate that both instruction prefetching techniques can achieve better worst-case execution cycles than the Next-N-Line prefetching while having various impacts on the average-case performance.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.910-934
• /
• 1995

CASE 도구의 활용과 소프트웨어 개발 프로세스 수준과의 관계를 규명하기 위하여 국내 57개 기업이 91개의 정보시스템 프로젝트를 대상으로 한 실증적 연구를 수행하였다. 기업의 일반적인 특징과 CASE 도구의 활용정도, 소프트웨어 개발 프로세스 수준에 관한 자료를 획득하기 위하여 설문조사를 실시하였고, 연구 초점은 CASE 도구의 활용에 있어서 중요한 요인을 찾는데 있다. CASE 도구의 도입 형태와 소프트웨어 개발 프로세스가, 개발 생산성에 미치는 영향에 대하여 4가지 가설을 검정하였다. 검정결과 두 독립변수가 모두 개발 생산성에 유의한 영향을 미치는 것으로 나타났다. 또한 CASE 활용과 소프트웨어 개발 프로세스간의 교호작용이 확인되었다. 본 연구는 또한 CASE 도구의 활용과 소프트웨어 개발 프로세스 수준사이의 전략적 관계 격자를 제시하였다. 전략적 관계 격자는 CASE도구 도입 형태와 소프트웨어 개발 프로세스 수준이 정도에 따른 4가지 셀로 구성되어 있는데 개별 셀마다 각 기업의 정보시스템 환경을 고려한 효과적인 전략을 제시한다. 마지막으로 CASE도구의 활용을 위한 추후 연구방향이 제시된다.

• Korean Management Science Review
• /
• v.13 no.1
• /
• pp.71-95
• /
• 1996

Many researchers have studied the theme on CASE technology. However, there are no many researches which lightened the diffusion of CASE technology and organizational change. The purpose of this study is to investigate the factors that influence on the diffusion of CASE technology and the way how IS organization changes as a result of the diffusion. We exploited a case study research as a methodology. We selected five software development firms which possessed the leading IS technology abilities as the case companies. We realized that the diffusion of CASE technology proceeded under the three context variables - managerial context of information systems, the intent and behavior of key players and implementation strategy of organization - to enhance the performance of information systems. The contribution of this study is to clarify the change of IS organization as a result of CASE technology diffusion. This study has the limitation that tried to analyze the organizational change only in a direction.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.190-193
• /
• 2006

The definition of the Dual system is that the total seismic force resistance is to be provided by the combination of the moment frame and the shear walls or braced frames in proportion to their stiffness and the moment frame shall be capable of resisting at least 25% of the design force in Korean Building Code 2005 (KBC 2005). But, the definition of moment frame is ambiguous whether the moment frame include the imaginary columns in the shear wall (Case I) or include only the columns outside the shear wall (Case II). 60-story RC building was designed as dual system for Case I and Case II, and the required strength and reinforcement are compared. Moment and axial capacity of the shear wall of Case II decreased about 5% due to the absence of the column in the shear wall. The requirement of upper and bottom reinforcement of slab in Case II increased 13% and 40%, respectively, when compared to those of Case I. The required longitudinal reinforcement in columns for Case II is about 1.5 times larger than that of Case I.

• Asia pacific journal of information systems
• /
• v.2 no.2
• /
• pp.15-30
• /
• 1992

Computer-Aided Software Engineering or CASE is the technology for automating the software development and maintenance process. Many firms are turning to CASE in hopes of realizing improvement in productivity and system quality. Although expenditures on CASE were reported to be rapidly rising, the performance gains have been very difficult to measure. The empirical results in this article are intended to provide some evidence about (1) the major objective of using CASE, (2) the gains from CASE, (3) the difference in productivity among CASE tools. They are based on an analysis of data collected from 61 software engineers from five corporations who have the experience of using CASE.

• Proceedings of the KAIS Fall Conference
• /
• 2003.11a
• /
• pp.50-56
• /
• 2003

In the development of complex software system, it is important to use hierarchical use case model due to the complex scope of development procedure. The use case model is core factor of the OMG (Object Management Group)'s UML (Unified Modeling Language) diagrams. In this paper, we propose a novel method to check syntactic consistency automatically in use case models at the different level of abstraction. This method is a rule-based approach which utilizes actor tree, use case tree and use case description. The proposed method is simulated on ITS (Intelligent Transportation System) architecture for the verification.