• 대한교통학회지
• /
• 제27권4호
• /
• pp.183-193
• /
• 2009

교통 환경문제로 대표되는 차량의 배기가스에 의한 대기오염은 삶의 질과 국민보건에 대한 관심뿐 아니라 범세계적인 문제로 인식되고 있다. 본 연구에서는 교통수요모형과 GIS를 이용하여 도로이동오염원에 대한 시공간적 고해상도의 배출량 산정 방식을 제시하여 정부와 지자체가 효과적으로 대기 질 개선 정책을 수립 추진할 수 있는 기반을 마련하고자 하였다. 이에 차량의 통행특성을 반영하는 Bottom-Up Approach 기법을 기반으로 총 주행거리를 실측치로 보정한 교통모형과 차량의 특성에 적합한 배출계수를 적용할 수 있는 대기모형을 이용한 개선된 기법을 제시하였다. 즉, 새로운 대안으로 교통-대기 통합패러다임에 의해 이를 연계한 도로이동오염원의 배출량 산정기법을 제시함으로써, 도로이동오염원 배출량의 신뢰도 개선이 기대되어진다.

• 한국대기환경학회지
• /
• 제34권4호
• /
• pp.517-533
• /
• 2018

We utilize the CAMx (Comprehensive Air Quality Model with eXtensions) system and the PSAT (Particulate Source Apportionment Technology) diagnostic tool to determine the $PM_{2.5}$ concentration and to perform its source apportionment in the southeastern region of South Korea. For a year-long simulation, eight local authorities in the region such as Pohang, Daegu, Gyeongju, Ulsan, Busan-Gimhae, Gosung-Changwon, Hadong, and all remaining areas in Gyeongsangnam-do, are selected as source areas based on the emission rates of $NO_x$, $SO_x$, VOC, and primary PM in CAPSS (Clean Air Policy Support System) 2013 emissions inventory. The CAMx-PSAT simulation shows that Pohang has the highest $PM_{2.5}$ self-contribution rate (25%), followed by Hadong (15%) and Busan-Gimhae (14%). With the exception of Pohang, which has intense fugitive dust emissions, other authorities are strongly affected by emissions from their neighboring areas. This may be measured as much as 1 to 2 times higher than that of the self-contribution rate. Based on these estimations, we conclude that the efficiency of emission reduction measures to mitigate $PM_{2.5}$ concentrations in the southeastern region of South Korea can be maximized when the efforts of local or regional emission controls are combined with those from neighboring regions. A comprehensive control policy planning based on the collaboration between neighboring jurisdictional boundaries is required.

• 한국대기환경학회지
• /
• 제27권4호
• /
• pp.460-471
• /
• 2011

A port has been regarded as a significant contributor to air pollution in the surrounding areas. Port-related air pollutants are released from not only marine vessels, but also various land-side sources at ports, which include cargo handling equipment, vehicles, locomotives, and fugitive dust sources by port activities such as bulk handling and vehicle movements. However, most studies in Korea have only focused on vessel emissions and there is a lack of information on the emissions from other sources at port. In this study, in order to establish the port-related emission inventory and evaluate the relative contribution of these sources to air emissions from the Port of Incheon, the emissions from land-side sources were estimated and the CAPSS (Clean Air Policy Support System) data for vessel emissions were used. In particular, the detailed information and activity data for the cargo handling equipment source were collected and the emission factors and emissions by equipment types were calculated using U.S. EPA methodologies. Total HC, CO, $NO_x$, $PM_{10}$, and $SO_2$ emissions from port-related sources including the vessel in 2007 were calculated as 229 ton/year, 638 ton/year, 4,861 ton/year, 307 ton/year, and 3,995 ton/year, respectively. It was found that the vessel was the largest contributor to air pollutant emissions from the port, the cargo handling equipment was responsible for about from 8% to 13% of HC, CO, and $NO_x$ emissions and the resuspended road dust contributed about 39% for $PM_{10}$ emissions. The results of this study will be used to establish the management and reduction strategies of air pollution in the port.

• 한국환경과학회지
• /
• 제30권10호
• /
• pp.789-802
• /
• 2021

This study analyzed the characteristics of high PM_2.5 episodes that meets the concentration criteria of Emergency Reduction Measures Plan (ERMP) in Busan during the 2015-2020, and compared with those in Seoul. As a first step, the CAPSS-2017 emission data was employed to analyze the emission differences between Busan and Seoul, and pointed out that Busan emission included the dominance of ship emissions (37.7%) among total PM_2.5 city emissions, whereas fugitive PM_2.5 emission was the highest in Seoul. These emission characteristics are indicating that the controlling action plan should be uniquely applied to cope with ERMP in each region. We selected extremely high PM_2.5 episode days that meet the criteria of ERMP levels. In Busan, Ulsan, and Gyeongnam region, 15, 16, and 8 days of extremely high PM_2.5 cases were found, respectively, whereas Seoul showed approximately doubling of occurrences with 37 cases. However, the occurrences in summer season indicated big differences between two cities: the proportion of summer-season occurrence was 13-25% in Busan, whereas no single case have occurred in Seoul. This is suggesting the needs of comprehensive summer emission reduction plan with focusing on sulfur reduction to effectively cope with the ERMP levels in summer in the southeastern region, including Busan.

• 한국기계가공학회지
• /
• 제18권3호
• /
• pp.14-25
• /
• 2019

From 2019 onwards, more stringent regulations (from Stage 4 to Stage 5) are to be implemented in Europe in order to reduce the air pollutant emissions. In South Korea, the government authorities started to make new regulation to meet the European regulation. As a first step, the air pollutant emissions such as CO, NOx, SOx, TSP, $PM_{10}$, $PM_{2.5}$, VOC, $NH_3$ by agricultural machinery were analyzed based on CAPSS inventory along with the analysis in the general aspect in this study. Three levels of analysis was conducted each in agricultural machinery aspect along with in the general aspect. Per agricultural tractor, all kinds of the air pollutant emissions decreased by 25, 25, 99, 25, 25, 25, 25% for the CO, NOx, SOx, TSP, $PM_{10}$, VOC, $NH_3$ emissions each from the year 2000 to the year 2014. Per combine harvester, all kinds of the air pollutant emissions decreased by 63, 63, 91, 63, 63, 63, 63% for the CO, NOx, SOx, TSP, $PM_{10}$, VOC, $NH_3$ emissions each from the year 2000 to the year 2014.

• 한국농공학회논문집
• /
• 제63권1호
• /
• pp.75-87
• /
• 2021

Air quality related to particulate matters and ammonia is being come to the fore as the national concern in Korea. CAPSS (Clean Air Policy Support System) provides emission coefficients of these kinds of particulate and gaseous matters in the fields of livestock; however reliability issues are consistently mentioned. Evaluation of emission rates of PM2.5 and NH3 of the country is very important, but only few studies are available as the background related to observation of the concentration of the particulate matter and ammonia, especially within livestock house in Korea. In this paper, long-term measurement of PM10, PM2.5, and ammonia within the mechanically ventilated broiler house were carried out to introduce backgrounds of generation and emission of the particulate matters and ammonia. Measurement results were analyzed according to seasonal changes, age of broilers(weeks) and measurement locations. Concentration of inhalable and respirable dust were also evaluated in terms of occupational respiratory health according to increase in broiler's activity. From the results of this study, identification of the generation mechanisms of the particulate and gaseous matters, and evaluation of the emission rate of these in the broiler house will be carried out.

• 한국입자에어로졸학회지
• /
• 제17권1호
• /
• pp.9-20
• /
• 2021

As a large city advanced, the urban environment is becoming an issue. The contribution of vehicle emissions in air pollutants was very high according to the clean air policy support system (CAPSS). In order to improve the air quality in large cities, it is necessary to establish improvement measures by sources, analyzing the air quality of roadside. We divided Bucheon city into 4 regions to investigate the roadside pollutants of each district using the mobile laboratory (ML) and air quality monitoring station (AQMS). ML was used to measure pollutants emitted from vehicles and AQMS data was used as a comparison group of ML data. As a measurement result of pollutants in the roadside, the concentration of air pollutants in industrial & engineering complex area was the highest and concentration of air pollutants in residential & forest complex area was lower. By street, Bucheon-ro, Sinheung-ro, Sosa-ro, and Gyeongin-ro were identified as high concentrations. Therefore, further researches on preparing management measures for roads in the hot-spot area are needed.

• 인간식물환경학회지
• /
• 제24권2호
• /
• pp.195-207
• /
• 2021

Background and objective: While response measures to particulate matters in rural areas are limited due to poor inventory record keeping in the agricultural sector, it is necessary to control agricultural waste vinyl and the emission of precursors released from open burning and the secondary generation of particulate matters. Currently, the open burning emission calculation method uses the definition prescribed in CAPSS by the National Institute of Environmental Research. Methods: This study presented an open burning emission calculation formula for agricultural waste vinyl, which is included as agricultural waste. As for activity data, the open burning ratio of agricultural waste vinyl, and the annual incineration volume provided in the Status Survey by the Ministry of Agriculture, Food, and Rural Affairs were applied. The emission factor was generated through incineration tests on three agricultural plastic film samples collected by the Korea Environment Corporation. Results: Among precursors, SOx and NOx were selected and their emission features were monitored with incineration experiment infrastructure based on the EPA 5G method. The highest emission concentration by agricultural waste type was concentrated in the first and second quarters. As for emission factor of SO₂, it was calculated at 98.25 g/kg for mulching-use LDPE, 52.31 g/kg for greenhouse-use LDPE, and 14.40 g/kg for HDPE. As for NOx, it was calculated at 18.21 g/kg for mulching-use LDPE, 16.49 g/kg for greenhouse-use LDPE, and 10.67 g/kg for HDPE. Conclusion: This test confirmed the incineration features of PE-based plastics, ascertained the SOx emission factor that had not been included in open burning in the past, and established that low NOx emission concentration is interfered by soil mixed with livestock excretions. The findings from this study are expected to contribute to improving the system for controlling air pollutants in rural environments.

• 한국대기환경학회지
• /
• 제34권2호
• /
• pp.306-320
• /
• 2018

Emission inventory is the essential component for improving the performance of air quality forecasting system. This study evaluated the simulated daily mean $PM_{2.5}$ concentrations in South Korea and China for 1-year period (Sept. 2016~Aug. 2017) using air quality forecasting system which was applied by the emission inventory of E2015 (predicted CAPSS 2015 for South Korea and KORUS 2015 v1 for the other regions). To identify the impacts of emissions on the simulated $PM_{2.5}$, the emission inventory replaced by E2010 (CAPSS 2010 and MIX 2010) were also applied under the same forecasting conditions. These results showed that simulated daily mean $PM_{2.5}$ concentrations had generally suitable performance with both emission data-sets for China (IOA>0.87, R>0.87) and South Korea (IOA>0.84, R>0.76). The impacts of the changes in emission inventories on simulated daily mean $PM_{2.5}$ concentrations were quantitatively estimated. In China, normalized mean bias (NMB) showed 5.5% and 26.8% under E2010 and E2015, respectively. The tendency of overestimated concentrations was larger in North Central and Southeast China than other regions under both E2010 and E2015. Seasonal differences of NMB were higher in non-winter season (28.3% (E2010)~39.3% (E2015)) than winter season (-0.5% (E2010)~8.0% (E2015)). In South Korea, NMB showed -5.4% and 2.8% for all days, but -15.2% and -11.2% for days below $40{\mu}g/m^3$ to minimize the impacts of long-range transport under E2010 and E2015, respectively. For all days, simulated $PM_{2.5}$ concentrations were overestimated in Seoul, Incheon, Southern part of Gyeonggi and Daejeon, and underestimated in other regions such as Jeonbuk, Ulsan, Busan and Gyeongnam, regardless of what emission inventories were applied. Our results suggest that the updated emission inventory, which reflects current status of emission amounts and spatio-temporal allocations, is needed for improving the performance of air quality forecasting.

• 한국대기환경학회지
• /
• 제30권6호
• /
• pp.555-568
• /
• 2014

The construction equipment is one of the major sources for hazardous air pollutants in Korea, and the its management has been of great concern recently. The objective of this study was to estimate each contribution of emission of construction equipments according to their production year, electric power consumption and type. To achieve this goal, we developed pollutant emission factors for the machineries manufactured after 2009, which are excluded from the present framework of Korean air pollutants inventory, CAPSS. More than 800 data obtained from emission investigations were utilized for the estimation. Compared with the previous estimation, the scheme used this study was modified to incorporate new emission factors as well as to include the corresponding activity data. Such improvement allow us to gain more detailed emission informations which are better characterized by specifications of construction equipments. The total amount of pollutants emitted from construction equipments in 2011 were estimated as 126.8, 7.0, 58.3, and 17.0 kton for $NO_x$, PM, CO, and VOC, respectively. The estimation results indicate that the increase in the emission of equipments is significantly related to their age and power consumption. The emissions of the older ones manufactured from 1992~1996 were estimated to be the contribution ranged from 23.7% to 26.8%, whereas the newer ones (2009~2011) showed the attributions of 11.3~21.5%. In addition, the results show that the emission of each equipment was increased with the increase in the electric power consumption of engine, probably due to their average output power. Among the nine types of machinery compared, excavators and forklifts were investigated to contribute relatively higher emissions in the level of 39.8~44.0% and 32.0~34.2%, respectively.