• 화약ㆍ발파
• /
• 제15권2호
• /
• pp.7-22
• /
• 1997

On the Tunneling, This paper described Concerning Nonel Caps and also Compared to Electric detonation Caps. If nonel caps used to Tunneling, advanced efficiency of Tunneling will be increased about 25% than Electric caps used.

• 한국버섯학회지
• /
• 제19권4호
• /
• pp.336-340
• /
• 2021

본 연구에서는 국내에서 개발된 국내에서 개발된 10개의 양송이 품종을 CAPS 마커를 이용하여 구분하였다. An 등(2021)이 개발한 CAPS 마커 AB-gCAPs-017, AB-gCAPs-047, AB-gCAPs-055, AB-gCAPs-071을 이용하여 새아, 새도, 새한, 새연, 새정, 도담, 설강, 다향, 호감, 하담을 구분할 수 있었다. 본 연구의 결과는 국내 개발 양송이 품종에 대하여 품종간의 구별성과 유전적 다양성을 부여하여 품종보호에 대한 분자생물학적 근거를 마련하였다.

• 한국의류학회지
• /
• 제30권4호
• /
• pp.615-622
• /
• 2006

A tool to evaluate the subjective wearing comfort of caps from the objective measurement of pressure was developed. Comfortable Fittability Index(C.F.I) and Holding Power(HP) were defined to represent the subjective wearing comfort of caps. As a preliminary step to define the Comfortable Fittability Index(C.F.I), average pressure, pressure distribution, standard deviation of pressure were obtained and subjective sensation were evaluated by wearing caps. Also Holding Power(HP) was estimated from wind tunnel testing. Two sets of caps were evaluated, one set made of elastic fabric(F-caps) and the other set made of non-elastic fabric(S-caps). F-caps begin to be taken off by the higher wind velocity and thus exhibited higher values of Holding Power. On the other hand, F-caps exerted lower average pressure, narrower pressure distribution, smaller standard deviation.

• 한국환경과학회지
• /
• 제19권12호
• /
• pp.1355-1359
• /
• 2010

The application of metal caps has been continuously increased as real life are extended. Metal caps is usually made of aluminum and polyethylene(PE) as packing. Since metal caps contain 75% aluminum on a weight basis, metal caps may be a valuable source when these were properly recovered. The recovery methods of metal caps have mechanical peeling and incineration. However these are either hard to apply in some case or environmentally unacceptable. So in this investigation, recovery method of aluminum from metal caps was investigated using pyrolysis. The result shows that pyrolysis temperature and pyrolysis time was $450^{\circ}C$ and 120min. respectively. Also 100% of aluminum was recovered from metal caps. Heat content of recovered oil was high enough to use as a fuel representing 7,425.0, 7,793.1, 7,583.2, 7,726.2(cal/g). Heavy metal contens in the oil were under regulatory limit indicating.

• 한국육종학회지
• /
• 제40권4호
• /
• pp.401-407
• /
• 2008

딸기 국내 육성 신품종을 정확히 판별할 수 있는 DNA표지를 개발하고자 실험을 수행하였다. 딸기 유전정보를 이용하여 품종 판별이 가능한 CAPS 표지 15종을 개발하였고, 그 중에서 6종은 품종 특이적인 표지였다. CAPS 표지 중에서 ANR-MspI, ANR-BamHI, ACO-HinfI, DFR-AseI, FGT-MspI의 최소 5종의 표지를 이용하여 '매향'과 '선홍'을 제외한 국내 육성 품종 판별이 가능하였다. 15종의 CAPS 표지를 보완하기 위해 SRAP 분석을 통해 품종 간 다형성을 나타내는 15종의 표지를 선발하였고, 그 중에서 me1/em5-460bp 표지를 이용하여 '매향'과 '선홍'의 구별이 가능하였다. 따라서 5종의 CAPS 표지와 1종의 SRAP 표지를 이용하여 19종의 국내 육종 품종과 일본 품종의 판별이 가능하였으며, 금후 이 연구결과는 딸기 국내 육성 품종 식별을 위해 효과적으로 이용될 수 있을 것으로 판단되었다.

• 비교문화연구
• /
• 제24권
• /
• pp.32-45
• /
• 2011

This paper addresses some issues on the Northern Nigerian traditional garments and caps. We observed that most of the Northern Nigerian garments and caps, particularly those of the Kanuri people, have their origin in the culture and traditions of the people. In very significant ways, the garments and the caps depict the belief systems, political metaphysics, and the general consciousness of the people including their creative impulses. But as more and more people move from rural areas to the cities, travel abroad and as more and more cultures intermingle, inevitable changes catch up with the culture and tradition of the people. We observed that it is hard to find in the Northern Nigeria scene, particularly among the Kanuri people, clothes that have assumed new nomenclature other than garments and caps. We realized that, the culture and tradition of the Kanuri people wearing longer, voluminous and roomy garments preferably with cap have witnessed changes due to the blend with foreign culture. This and many other issues are discussed in this paper. The purpose of this research is to show that inspite of the Kanuri people's strong adherence to their beliefs and culture which hardly encourage any changes, the use of their traditional garments and caps have exhibited the flexibility of their beliefs, culture and traditions. The use of the garments and caps discussed in this paper are those observed among the Kanuri people of Northern Nigeria.

• 한국수산과학회지
• /
• 제56권1호
• /
• pp.124-132
• /
• 2023

This study aimed to cross between Korean and Japanese pure lines of Neopyropia strains to establish cross breeding technology and identify a superior variety that harbors the strength of both parents. Four crossing combinations were tried using three methods, resulting in 1,476 single conchocelis colonies. The three co-dominant Cleaved Amplified Polymorphic Sequence (CAPS) markers (EF-1α/Mse I, TOP2/Mse I, car A/ApaL I) were used to distinguish heterozygotic sporophytes and their maternal lines obtained from the inter and intraspecific cross-fertilization within the wild type of Neopyropia strains. Of the 1,476 colonies, 26.9% (218) were heterozygotes obtained from the nuclear CAPS markers. Their maternal line was clearly confirmed using organelle CAPS marker and chimeric thallus was obtained from crossing experiment of Japanese N. yezoensis (♀) and Korean N. yezoensis (♂). The use of CAPS markers improved the efficiency of crossbreeding by quickly screening heterozygotes and maternal lines in the conchocelis phase, which otherwise required pigmentation mutants as genetic markers.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.380-383
• /
• 2003

Deep pile caps usually contain no transverse shear reinforcement and only small percentages of longitudinal reinforcement. The current design procedures including ACI 318-02 for the pile caps do not provide engineers with a clear understanding of the physical behavior of deep pile caps. In this study, the failure strengths of nine pile cap specimens tested to failure were evaluated using 3-dimensional strut-tie models. The analysis results obtained from the present study were compared with those obtained from several design methods, and the validity of the present method implementing 3-dimensional strut-tie models was examined.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.389-396
• /
• 2002

Engineers should be careful in the design of bonding piles into pile caps because they are weak points in the pile foundation. Therefore in this study, the mechanism of bonding piles into pile caps was explained, and the design method of the composite bonding method was proposed. And the proposed design method was verified in comparison with the result of the full scale test. Also, the characteristic for the bearing capacity and the mechanism of compressive load of bonding method were analyzed.

• 정보처리학회지
• /
• 제9권6호
• /
• pp.88-91
• /
• 2002