• The Journal of Advanced Prosthodontics
• /
• v.8 no.4
• /
• pp.275-284
• /
• 2016

PURPOSE. The aim of this study was to evaluate the influence of different surface treatment methods on the microtensile bond strength of resin cement to resin nanoceramic (RNC). MATERIALS AND METHODS. RNC onlays (Lava Ultimate) (n=30) were treated using air abrasion with and without a universal adhesive, or HF etching followed by a universal adhesive with and without a silane coupling agent, or tribological silica coating with and without a universal adhesive, and divided into 6 groups. Onlays were luted with resin cement to dentin surfaces. A microtensile bond strength test was performed and evaluated by one-way ANOVA and Tukey HSD test (${\alpha}$=.05). A nanoscratch test, field emission scanning electron microscopy, and energy dispersive X-ray spectroscopy were used for micromorphologic analysis (${\alpha}$=.05). The roughness and elemental proportion were evaluated by Kruskal-Wallis test and Mann-Whitney U test. RESULTS. Tribological silica coating showed the highest roughness, followed by air abrasion and HF etching. After HF etching, the RNC surface presented a decrease in oxygen, silicon, and zirconium ratio with increasing carbon ratio. Air abrasion with universal adhesive showed the highest bond strength followed by tribological silica coating with universal adhesive. HF etching with universal adhesive showed the lowest bond strength. CONCLUSION. An improved understanding of the effect of surface treatment of RNC could enhance the durability of resin bonding when used for indirect restorations. When using RNC for restoration, effective and systemic surface roughening methods and an appropriate adhesive are required.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.4
• /
• pp.225-232
• /
• 2020

PURPOSE. This study aimed to fabricate provisional crowns at varying build directions using the digital light processing (DLP)-based 3D printing and evaluate the marginal and internal fit of the provisional crowns using the silicone replica technique (SRT). MATERIALS AND METHODS. The prepared resin tooth was scanned and a single crown was designed using computer-aided design (CAD) software. Provisional crowns were printed using a DLP-based 3D printer at 6 directions (120°, 135°, 150°, 180°, 210°, 225°) with 10 crowns in each direction. In total, sixty crowns were printed. To measure the marginal and internal fit, a silicone replica was fabricated and the thickness of the silicone impression material was measured using a digital microscope. Sixteen reference points were set and divided into the following 4 groups: marginal gap (MG), cervical gap (CG), axial gap (AG), and occlusal gap (OG). The measurements were statistically analyzed using one-way ANOVA and Dunnett T3. RESULTS. MG, CG, and OG were significantly different by build angle groups (P<.05). The MG and CG were significantly larger in the 120° group than in other groups. OG was the smallest in the 150° and 180° and the largest in the 120° and 135° groups. CONCLUSION. The marginal and internal fit of the 3D-printed provisional crowns can vary depending on the build angle and the best fit was achieved with build angles of 150° and 180°.

• Journal of Sensor Science and Technology
• /
• v.13 no.6
• /
• pp.479-487
• /
• 2004

The prevention of noise induced hearing loss is very important, because there is no treatment for it. There are some kinds of devices for hearing protection, and those are effective in preventing a noise induced hearing loss. However, people often resist the use of hearing protection devices because it is difficult to have a conversation. Therefore, a hearing protection device is must effective not only in hearing protection but also in preserving communication ability. In this paper, we proposed a small acoustic filter for ITE type noise protector to solving the problem about the difficulties of conversation. That is applied a principle of acoustic filters that have been used for a muffler of automobiles, guns, and etc. To find out the sound transmission characteristic at the eardrum, we regarded an acoustic filter and external ear canal as a coupled system. So, we simulated the coupled system with OrCad, and experimented with a designed acoustic filter and a 2 cc coupler which has the same transmission characteristic as the external ear canal has. We confirmed that it is possible to adjustment acoustic transmission characteristics through simulation of electrical model for acoustic filter and external ear and experiments using designed small acoustic filters.

• Journal of Environmental Science International
• /
• v.16 no.10
• /
• pp.1169-1177
• /
• 2007

The main objective of this research was to evaluate the effects of process variables which were forming ability, flow displacement, effective stress, effective strain, fluid vector and products defects on manufactured artificial lightweight aggregate made of both incinerated sewage sludge ash and clay by means of the numerical analysis of a rigid-plastic finite element method. CATIA (3D CAD program) was used for an extrusion metal mold design that was widely used in designing aircraft, automobile and metallic molds. A metal forming analysis program (ATES Co.) had a function of a rigid-plastic finite element method was used to analyze the program. The result of extrusion forming analysis indicated clearly that a shape retention of the manufactured artificial light-weight aggregate could be maintained by increasing the extrusion ratio (increasing compressive strength inside of extrusion die) and decreasing the die angle. The stress concentration of metal mold was increased by increasing an extrusion ratio, and it was higher in a junction of punch and materials, friction parts between a bottom of the punch and inside of a container, a place of die angle and a place of die of metal mold. Therefore, a heat treatment as well as a rounding treatment for stress distribution in the higher stress concentration regions were necessary to extend a lifetime of the metallic mold. A deformity of the products could have made from several factors which were a surface crack, a lack of the shape retention and a crack of inside of the products. Specially, the surface crack in the products was the most notably affected by the extrusion ratio.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1462-1468
• /
• 2014

Xe gas is moved to target from GPM. It is used to feasible nuclear reaction from proton of 30MeV cyclotron being investigated by the Xe-124 gas target system. This system is divided into four parts. The hardware system was constructed by solidworks 3-D CAD and Helium supply is to cool the Havor foil. The Cooling water has the job of cooling down the temperature when Xe gas is being investigated in the target. Temperature and pressure gauges are attached to be checked easily. GPM has the part that prepares to transport Xe gas. There are storage vessel that stores Xe gas, the cold trap that filters humidity and impurity and lastly storage vessel that temporarily stores Xe gas. HCS using the helium is to clean and cool for each part. These parts are configured with SIEMENS PLC and PcVue monitoring program for more comfortable and easy maintenance.

• Industrial Engineering and Management Systems
• /
• v.15 no.4
• /
• pp.396-402
• /
• 2016

In this study, hydraulic analysis of water-supply networks in Marivan was performed by modeling. WATERGEMS was used for modeling and it was calibrated using existing rules and regulations. The purpose of this research is modeling urban water network and its analysis based on hydraulic criteria and meeting pressure conditions at the nodes and complying the economic speed. To achieve this goal, first the pipelines of city streets was designed in AutoCAD on a map of the city. It should be mentioned that it was tried to prevent from creating additional loops in the network and the optimal network was designed by a combination of annular and branch loops. In the next step, the pipes were called in WATERGEMS and then we continue the operation by the allocation of elevation digits to the pipes. Since the topography of this city is very specific and unique, the number of pressure zones was increased. Three zones created only covers about 20% of the population in the city. In this dissertation, the design was performed on the city's main zone with the largest density in the Figures 1,320-1,340. In the next step, the network triangulation was conducted. Finally, the Debiw as allocated based on the triangulation conducted and considering the density of the city for year of horizon. Ultimately, the network of Marivan was designed and calibrated according to hydraulic criteria and pressure zoning. The output of this model can be used in water-supply projects, improvement and reform of the existing net-work in the city, and various other studies. Numerous and various graphs obtained in different parts of a network modelled can be used in the analysis of critical situation, leakage.

• Fashion & Textile Research Journal
• /
• v.9 no.3
• /
• pp.278-285
• /
• 2007

The purpose of this study is the image of clothing according to the change of the dots' interval was analyzed and its influence on the formation of the image of polka dots clothing was investigated. White waterdrop patterns were designed on the 12 kinds of black texture using Photoshop and CAD program in regular arrangement of diamond figure, composed of white waterdrop(0.5 cm, 1.0 cm, 1.5 cm and 2 cm in diameter) and interval(diameter : interval - 1 : 1, 1 : 2, 1 : 4). Applying above specification, the photograph stimulus of 12 kinds of X-line one-piece dress with wide square neckline and without sleeve or detailed ornament was presented on a screen in the same size as when putting it on. The image of polka dots clothes was investigated by questionnaire survey. The object of the study was 320 females aged between 16 and 29. Factor analysis, one-way ANOVA, Scheff$\acute{e}$ verication and two-way ANOVA using SPSS 10.0 were carried out for data analysis. The research finding are as follows. First, the image of polka dots clothing consists of 4 factors as aesthetics, brevity, dynamism and lightweight. Secondly, the interval of the dot has a great influence on the formation of the image of polka dots clothing. Lastly, the evaluations of the image of polka dots clothing were different depending on the age and physical image, the personal characteristics of the object of investigation.

• Journal of Technologic Dentistry
• /
• v.42 no.1
• /
• pp.9-16
• /
• 2020

Purpose: The purpose of this study was to compare the marginal and internal fit of lithium disilicate ceramic inlay produced by heat pressing that inlay pattern made by subtractive manufacturing and additive manufacturing method. Methods: A mandibular lower first molar that mesial occlusal cavity (MO cavity) die was prepared. After fabricating an epoxy resin model using a silicone impression material, epoxy resin die was scanned with a dental model scanner to design an MO cavity inlay. The designed STL pile was used to fabricate wax patterns and resin patterns, and then lithium disilicate ceramic inlays were fabricated using hot-press method. For the measurement of the marginal and internal gap of the lithium disilicate, silicone replica method was applied, and gap was measured through an optical microscope (x 80). Data were tested for significant differences using the Mann-Whitney Utest. Results: The marginal fit was 103.56±9.92㎛ in the MIL-IN group and 81.57±9.33㎛ in the SLA-IN group, with a significant difference found between the two groups (p<0.05). The internal fit was 120.99±17.52㎛ in the MIL-IN group and 99.18±6.65㎛ in the SLA-IN group, with a significant difference found between the two groups (p<0.05). Conclusion: It is clinically more appropriate to apply the additive manufacturing than subtractive manufacturing method in producing lithium disilicate inlay using CAD/CAM system.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.3_4
• /
• pp.412-421
• /
• 2002

The main purpose of this study was to examine whether there exist physical attractiveness stereotype, ‘what is beautiful is good’on the evaluation of stimulus person’s task performance in present Korea. This study also examine the effects of the appropriateness of the stimulus person’s clothing and subjects’sexes on the task performance evaluation. The index of the physical attractiveness of this study was the facial attractiveness judged by 30 female university students. The appropriateness of clothing was manipulated by 4 types of clothing perceived appropriate for two assumed situations by female university students. Three female faces having high, medium, and low attractiveness were simulated with the same body dressed four types of clothing using CAD system, and a total of 12 stimulus persons were created. A total of 524 male and female(262 of male, 262 of female) university students from 3 universities in Kwangju, Korea were participated as subjects in this study. The design for the experiment was a $3\;{\times}\;4\;{\times}\;2$ randomaized factorial, with three levels of facial attractiveness (high, medium, low), and four types attire(formal-masculine, formal-feminine, casual-masculine, casual-feminine), two kinds of context (job interview, dating) in which perceptions were occurred. The data were analysed using MANOVA, Duncan test and F-test. The results were as fellows: 1. The stimulus person’s facial attractiveness exerted significant positive effects on the evaluation of task performance in both of two assumed situations (p<.001, respectively). 2. The appropriateness of stimulus person’s clothing did not influence on the task evaluation in both of two assumed situations. 3. The gender of subjects did not influenced the task performance evaluation in both of two assumed situations.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.7
• /
• pp.1919-1928
• /
• 1999

There are no standard language for the specification of speed-independent circuits because existing specification methods are designed appropriately to each synthesis methodology. This paper suggests a method of using VHDL, a standard hardware description language, for the specification and synthesis of speed-independent circuits. Because VHDL is a multi-purpose language, we define a subset of VHDL which can be used for the synthesis. We transform the VHDL description into a signal transition graph and then synthesize speed-independent circuits by using a previous synthesis algorithm which uses a signal transition graph as the specification method. We suggest a systematic transformation method which transforms each VHDL statement into a partial signal transition graph and then merges them into a signal transition graph. This work is a step towards to the development of an integrated framework in which we can utilizes the existing CAD tools based on VHDL. Also, this work will enable a easier migration of the current circuit designers into asynchronous circuit design.