• Fashion & Textile Research Journal
• /
• v.7 no.1
• /
• pp.23-32
• /
• 2005

This study attempts to address the development processing of yarn-dyeing jacquard design by using jacquard textile design professional CAD system to create high valued worth products. To carry out this purpose, two kinds of necktie samples were designed and each of them was different in three types of weaving method. The results are as follows; All over type is appropriate when the motive's size is small. And the work can be finished within short time and design can be illustrated by basic jacquard system. However, one point type can represent rather big and audacious motive but it needs lots of working hours and jacquard system. Though the motives are identical, showed many changes in cubicle representation according to weaving methods and the structure. To express simple and modest design, single fabric woven is suitable and in the need of colorful and technical design, expressing by double weft cloths and triple weft cloths rather than single fabric woven are better to give creativity and colorfulness. For the production of jacquard design, cad system using ability is important but the understanding and study of the whole process of weaving development should be made.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.4
• /
• pp.169-177
• /
• 2009

Concurrent Engineering (CE) has presented new possibilities for successful product development by incorporating various product life-cycle functions from the earlier stage of design. In the product design, geometric representation is vital not only in its traditional role as a means of communicating design information but also in its role as a means of externalizing designer's thought process by visualizing the design product. During the last dozens of years, there has been extraordinary development of computer-aided tools intended to generate, present or communicate 3D models. However, there has not been comparable progress in the development of 3D-CAD systems intended to represent and manipulate a variety of product life-cycle information in a consistent manner. In the previous research, the authors proposed a novel concept called Minus Volume (MV) to incorporate various design information relevant to product life-cycle functions. This paper proposes the use of the MV concept for the collaborative design environment, where many team members are geographically distributed over the networked environment, including Internet, Intranet, WWW, etc. A prototype 3D-CAD system is implemented based on the MV concept and illustrated with the successful implementation of collaborative design example.

• The KIPS Transactions:PartA
• /
• v.13A no.1 s.98
• /
• pp.27-34
• /
• 2006

Designers should know CAD tool/license information such as available number of licenses or tools, types, and configuration methods to use CAD tools properly in their group. Usually, this information is provided by managers who administrate CAD tool and license servers in the specific design group. In the previous CAD tool/licenses sharing methods, designers have to get CAD tool/license information manually and setup the environments with their own hands. n a new designer comes into the design working group, the designer wastes unnecessary design time, because of these processes. As a result, designer's poductivity and utilization of CAD tools will decrease Besides, managers also waste their time and effort, since they should provide CAD tool/license information manually to each designer. In this paper, we present an automated scheme to share CAD tool/license information based on directory service. The proposed methods automate the communication processes between managers and designers that minimze unnecessary time to share CAD information. In addition, as this system maintains the consistency of CAD information automatically that remove the repeated work of managers and designers, it improves the enciency of sharing. Besides, it automates the license configuration steps using prof(y Last, we offer Executable Proxy which is proper for thin CAD application. We believe this scheme will reduce designers and managers' time and effort as well as maximize the utilization of CAD tools.

• Archives of design research
• /
• v.17 no.1
• /
• pp.289-298
• /
• 2004

With the advance of digital technology, development of exclusive CAD system for fashion textile that may suggest the future of fashion textile industry is increasingly accelerated. To build up the foundation of digital culture, it is required for fashion textile industry to develop goods with high value added and make rapid change of production system, and actually, exclusive programs are being developed to meet with the desire. Present study considers the vicissitude of fashion textile and the composition and characteristics of design system, and compares and analyses a variety of design developments of digital fashion textile. And it systemizes the expansion and change of creative digital pattern designs that are developed differing from existing graphic program, the expression of suitable textile texture, and the simulation effect by three-dimension modeling. By separating the usage of CAD system for fashion textile into designing and producing aspects, it also focuses on increasing the usage of exclusive CAD system for fashion textile.

• CDE review
• /
• v.2 no.1
• /
• pp.44-47
• /
• 1996

국내에서 오래전부터 몇몇 CAD S/W들이 개발되었고 지금도 이와 같은 노력은 계속되고 있는 상황이다. 본 고에서는 삼성에서 개발한 MagicCAD의 개발과정에 있었던 여러가지 사항을 특별한 제약없이 기술하고 MagicCAD의 몇몇 특징을 소개하고자 한다. MagicCAD는 현재 삼성 그룹내 전자 계역 회사들(삼성전자, 삼성전관, 삼성전기 등) 위주로 1000여 copy가 현업에서 사용중에 있다.

• The Journal of Natural Sciences
• /
• v.8 no.2
• /
• pp.225-236
• /
• 1996

Computer simulation methods for three area of textile design, wearing, and design were developed by using CAD system, and its results were applied to pattern design simulation. Textile design created by using the CAD system was applied to T-shirt schematization. Created wearing, printing, and knitting design respectively were applied to women clothing, children's wear, and men sweater. In this rearch, several equipped since various color working, materials, pattern development and swift intention decision of goods direction are possible on the moniter. Third, many goods order are rushed within short time because spot direction are possible on the moniter. Third, many goods order are rushed within short time because intention decision of buyer could be induced and embodied design almost reflection the buyer's will on the spot before production of goods and samples. Forth, time and expense were saved to get the information in terms of design information systematically and could be managed annually. Fifth, creative design development can be not only availed but saved the service expense of outside orders and the traffic expense.

• Journal of Fashion Business
• /
• v.4 no.4
• /
• pp.41-54
• /
• 2000

The purpose of this study was to investigate various expressions in textile design using CAD and present print design of '01/02 A/W. Four steps were taken in order to achieve this purpose. The first step was to investigate prior research and to analyze textile design methods using CAD. The second step was to study '01/02 A/W fashion trend, especially textile trend. The third step was to design the print design according to textile trend and apply the designed print pattern to real model. The research results are as follows: 1. Textile design is a very important field to help making fashion industry more informative and valuable. 2. Using CAD system in textile design will be very useful and urgent in saving working time and exercising design works. 3. In '01/02 A/W hound's tooth, zigzag, herringbone will be prevalent bold geometric patterns while tartan checks, multi color stripes will be popular too. 4. Textile designs using flower, stripe, checks, dot, abstract pattern were applied to real model, the images of patterns design are as follow, flower pattern-romantic stripe-avantgarde check-cute dotclassic abstract motive-intelligent.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1326-1331
• /
• 2005

A product is designed through the collaboration among engineers in several fields such as design, analysis, and manufacturing. These series of functions are performed repeatedly during the design process. An easy access and exchange of the model data is one of the important elements that help to shorten production development time. Especially, the importance of data exchange between CAD and CAE applications is increasing in the field of verification and estimation of the products. However, information and knowledge of model which is generated by a CAD software cannot be transferred by a function of CAE software, as an exchange of product data between CAD and CAE applications. It causes a delay in design analysis and eventually discourages a designer's effort in improving his design. Therefore, we need to integrate a commercial CAD and CAE applications effectively and to use the same interface on a product model obtained in a distributed environment. This paper shows how to implement a model exchange between CAD and CAE by a web-service and how to provide a communication environment among engineers.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.12 s.189
• /
• pp.95-102
• /
• 2006

A product is designed through the collaboration among engineers in several fields such as design, analysis, and manufacturing. These series of functions are performed repeatedly during the design process. An easy access and exchange of the model data is one of the important elements that help to shorten production development time. Especially, the importance of data exchange between CAD and CAE applications is increasing in the field of verification and estimation of the products. However, information and knowledge of model which is generated by a CAD software cannot be transferred by a function of CAE software, as an exchange of product data between CAD and CAE applications. It causes a delay in design analysis and eventually discourages a designer's effort in improving his design. Therefore, we need to integrate a commercial CAD and CAE applications effectively and to use the same interface on a product model obtained in a distributed environment. This paper shows how to implement a model exchange between CAD and CAE by a web-service and how to provide a communication environment among engineers.

• IE interfaces
• /
• v.7 no.1
• /
• pp.67-74
• /
• 1994

In this study, we propose an integrated CAD(Computer Aided Design) library database in a heterogeneous commercial ECAD(Electronic CAD) environment. To effectively solve engineering problems focused on BOM data extraction we use a software system called schematic capture and company-wide standard electronic part information loaded on different commercial ECADs. We unify many commercial ECADs into one schematic capture and a variety of PCB(Printed Circuit Board) design tools. For this purpose we develope a model for linking CAD symbol library with company-wide standard part information. We also develope a schematic design data conversion scheme and show how to extract PBA level BOM data using our customized schematic capture. This system is being operated in an X-Window based engineering work station and commercial RDBMS base.