• Journal of Korea Society of Industrial Information Systems
• /
• v.7 no.5
• /
• pp.167-174
• /
• 2002

This paper analyzes the characteristics of three multipliers and squarers in finite fields GF(2/sup m/) from the point of view of processing time and area complexity. First, we analyze structures of three multipliers and squarers: 1) Systolic array structure, 2), LFSR structure, and 3) CA structure. To make performance analysis, each multiplier and squarer was modeled in VHDL and was synthesized for FPGA implementation. The simulation results show that CA structure is the best from the point view of processing time, and LFSR structure is the best from the point of view of area complexity.

• Journal of the Mineralogical Society of Korea
• /
• v.10 no.2
• /
• pp.82-96
• /
• 1997

Buserties are known to have layer structures with variable C dimension which depended on the nature interlayer catious and contents of water molecular between edge-sharing [MnO6] octabedral layers. Na-, Ca-, Mg-, and Zn-buserties were synthesized in the laboratory and studied for to know the structural states of water molecules and the role of catious in the buserite structures. With lowering the relative humidity(RH), Ca-buserite begins to dehydrate at 27% RH and proceeds further very slowly. Mg- and Zn- buserite also slow dehydration above 2% RH. With gradual ineveasing temperature Ca- and Zn-buserite show abrupt shifting of 10$\AA$ peak (10$\AA$-phare) toward 7$\AA$ peak. All of 7$\AA$-phare are further dehydrated to 5$\AA$-phare by further increasing temperature. It suggests that interlayer catious play a crucial role in the dehydration behavious of buserites. Simulation of one-dimensional X-ray diffraction patterns of buserties show that buserites have three layers of water molecules of different types: the very loosely bound and tightly bend waters, instead of two layers that was regarded by previous authers. The very loosely bound water is sited I open space of the interlayer, the loosely bound water is bound on the tightly bound water by hydrogen bond, and the tightly bond water in coodinately bound on the interlayer catious.

• Progress in Superconductivity
• /
• v.9 no.1
• /
• pp.18-22
• /
• 2007

For interlayer tunneling spectroscopy using a small stack of $Bi_2Sr_2CaCu_2O_{8+x}$ (Bi-2212) intrinsic junctions in a high-bias range, large self-heating takes place due to the poor thermal conductivity of Bi-2212. In this study, we numerically estimate the self-heating around a Bi-2212 sample stack for I-V or dI/dV-V measurements. Our results show that the temperature discrepancy between the Bi-2212 sample stack and top Au electrodes due to bias-induced self-heating is small enough along the c-axis direction of Bi-2212. On the other hand, the lateral temperature discrepancy between the sample stack and the Bi-2212 on-chip thermometer stack can be as large as ${\sim}20\;K$ for the highest bias required to observe the pseudogap hump structure. We thus suggest a new in-situ ac thermometry, employing the Au current-bias electrode itself deposited on top of the sample stack as the resistive thermometer layer, which is supposed to allow safe temperature measurements for the interlayer tunneling spectroscopy.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.3
• /
• pp.1031-1046
• /
• 2018

Vehicular ad hoc network (VANET) is a dedicated network to connect vehicles without any centralized administration or infrastructure. The wireless access in vehicular environments (WAVE) protocol leveraging IEEE 1609/802.11p is widely implemented for VANETs. However, in congested traffic situation, the performance of the WAVE system degrades significantly due to serious collision, especially for safety related broadcast services on the control channel (CCH) interval due to the inherent drawback of its collision avoidance mechanisms called carrier sense multiple access with collision avoidance (CSMA/CA). In this paper, we propose a method that can decrease the number of frame collisions in CCH with a few modifications to the IEEE 802.11p protocol. In the paper, vehicles still employ CSMA/CA to compete for the channel access opportunity. However, by taking advantage of periodicity of synchronization interval, a two-state switching scheme introducing two new inter frame space (IFS) is proposed to reduce the number of competing vehicles substantially and as a result, the collision probability is significantly decreased. The simulation results demonstrate the superiority of the proposed method in packet collision rate.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.5
• /
• pp.825-830
• /
• 2013

CA Arcot corporation in U.S.A has secure on-line financial trade solution and patent that verify whether transaction had change using virtual session. But, VPS(Virtual Private Session) has another vulnerability by way to construct CAPTCHA. We can't fully trust safety of VPS, Cause it could be attacked by using color information of CAPTCHA. In this paper, We suggest the method of attack VPS, and also point out the vulnerability of VPS though simulation.

• Journal of Internet Computing and Services
• /
• v.7 no.1
• /
• pp.151-164
• /
• 2006

The DCF of IEEE 802.11 standard coordinates transmissions onto the shared communication channel based on CSMA/CA protocol. Currently, 802,11 is the most widely deployed wireless LAN standard. In this paper, for 802.11-based wireless LAN we propose a service differentiation scheme adopting different contention window sizes and retransmission schemes for two different types of data packets and we present a Markov model for the state of a given station under a finite load traffic condition. We then derive an algorithm to find the transmission probability and the throughput. The proposed model is validated through simulation under various system settings.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.5
• /
• pp.2499-2522
• /
• 2017

Multi-hop networks are a low-setup-cost solution for enlarging an area of network coverage through multi-hop routing. Carrier sense multiple access with collision avoidance (CSMA/CA) is frequently used in multi-hop networks. Multi-hop networks face multiple problems, such as a rise in contention for the medium, and packet loss under heavy-load, saturated conditions, which consumes more bandwidth due to re-transmissions. The number of re-transmissions carried out in a multi-hop network plays a major role in the achievable quality of service (QoS). This paper presents a statistical, analytical model for the end-to-end delay of contention-based medium access control (MAC) strategies. These strategies schedule a packet before performing the back-off contention for both differentiated heterogeneous data and homogeneous data under saturation conditions. The analytical model is an application of Markov chain theory and queuing theory. The M/M/1 model is used to derive access queue waiting times, and an absorbing Markov chain is used to determine the expected number of re-transmissions in a multi-hop scenario. This is then used to calculate the expected end-to-end delay. The prediction by the proposed model is compared to the simulation results, and shows close correlation for the different test cases with different arrival rates.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.4
• /
• pp.85-98
• /
• 2002

The purpose of this study is to develop a land use planning model (LUPM) which can be applied to development of rural villages considering their spatial expansion. The LUPM finds out and allocates the new built site required for the improvement of existing villages. in the development of LUPM, CA (cellular automata) and land suitability analysis methods were applied combinedly. The model uses basically numerical data of CIS based on grid data. Agglomerated settlement, as a type of village for simulation, was adopted. Probability of land use change for optimizing development area was calculated by the six criteria: slope. drainage characteristic, direction of slope, as absolute suitability of grid itself, distance from road. distance from stream and distance from the village center, as relative probability by neighborhood cells. Weighting values of these criteria were quantified by AHP (analytic hierarchy process) method, which is one of MCE(multi-criteria evaluation) method. The algorithm of the model was verified by three example villages: an isolation village, a village with horizontal road, and a village with nodal point of cross road

• Journal of the Korea Society for Simulation
• /
• v.25 no.2
• /
• pp.1-11
• /
• 2016

The floor field model (hereafter referred to as FFM) is a cellular automata (hereafter referred to as CA)-based walk model used to model pedestrian behavior. Existing studies on FFM conducted experiments with simple structures (that have one room or one obstacle in a room) or relatively complicated structures (that have many rooms). In order to apply the FFM to real buildings, it is necessary to have additional methodologies to process information about the number of rooms, floors, stairs, and exit doors. In particular, it is necessary to process exit doors during this procedure. Exit doors that are recognized by pedestrians are of many types such as exit doors in rooms, stairs connected to corridors, and exit doors in a building. When calculating the static floor field (hereafter referred to as SFF) in the FFM, information about exit doors is needed and simulation results will be different depending on how the SFF is calculated using an exit door among the above-mentioned exit doors. In this study, an XML-format building data model is proposed according to data structures required by the FFM. This study also defines a methodology to process a number of exit doors. Accordingly, this study developed a building data construction and evacuation simulator and simulation experiments were conducted with university campus building.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.3
• /
• pp.43-48
• /
• 2012

Errors of relative permittivity calculation caused by the variation of sample aspect ratio (diameter/height) and measuring geometry were analyzed by computer simulation and measurement. Firstly, the $S_{21}$ spectrum of the sample (permittivity 38) was simulated in the post resonator measuring apparatus by HFSS simulation. Then, the relative permittivity was calculated from the $TE_{011}$ mode resonant frequency. The relative permittivity varied by ca. 0.3% with sample aspect ratio variation (D/H=0.8~1.6). The relative permittivity varied by ca. 1~10% when the 1~10% of air-gap was introduced in between the dielectric disk and upper conductor. All the simulation results showed consistent tendency with real measurement.