• Journal of the Korean Ceramic Society
• /
• v.21 no.2
• /
• pp.143-148
• /
• 1984

In this study we mainly dealt with the effects of organic retarder(calcium lignosulfate) on the early hydration process of clinker minerals. From a consideration of the hydration process of tricalcium silicate $(C_3S)$ tricalcium silicate $(C_3S)$-tricalcium aluminate $(C_3A)$ tricalcium silicate $(C_3S)$-tetracalcium aluminof-errite $(C_4AF)$ systems with calcium lignosulfate the following results were obtained. 1. when 0.25wt% of CLS was added to $C_3S$ the hydration process was progressed normally but adding of 0.5wt% its hydration was greatly retarded. 2. The hydration of $C_3S$-$C_3A$ system was progressed normally up to 0.5wt% but by adding gypsum its hydration was retarded slightly. 3. The hydration of $C_3S$-$C_4AF$ system was greatly retarded even with 0.25wt% of CLS but by adding gypsum its hydration process was recovered normally.

• Fire Science and Engineering
• /
• v.17 no.4
• /
• pp.105-110
• /
• 2003

In Part II, the temperature and smoke particle distributions of the extraction system, which yielded the best smoke removal performance among the three smoke control systems in Part I, for extraction flowrates of 0.6∼2.4 ㎥/s and two fire sizes of 200 ㎾ and 2 ㎿ were presented. The same numerical method was utilized to the same computational domain and configurations as Part I. It was shown that the extraction flowrate affects the smoke control performance significantly, and that a similar trend in improving the smoke removal performance with the increasing extraction flowrate between the two fire sizes. An extraction flowrate of 2.4 ㎥/s or higher was required for the temperature in the escape route less than $^{\circ}C$ for the given situations.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.349-352
• /
• 1999

We have investigated the electrical characteristics of arachidic acid($C_{20}$), stearic acid(C_{18} and palmitic acid($C_{16}$) Langmuir-Blodgett(LB) films because the fatty acid systems have a same hydrophilic group and a different hydrophobic one (alkyl chain length). In this work, fatty acid systems were used as LB films and the status of the deposited films were confirmed by evaluating the capacitance and I-V characteristics. The conductivity of $C_{20}$, C_{18} and $C_{16}$ LB films obtained from I-V characteristics were about 5x $10^{15}$, 3x $10^{14}$ and 9x $10^{14}$[S/cm], espectively. These results have shown the insulating materials and could control the conductivity by changing the length of alkyl chain. Also, we have confirmed that the barrier height of fatty acid systems were about 1.32- 1.40[eV] and the relative dielectric constant were about 2.9~4.2. These values were almost the same ones obtained from dielectric characteristics.

• Convergence Security Journal
• /
• v.23 no.5
• /
• pp.181-187
• /
• 2023

Recently, military operations have been aimed at winning using various information, analysis, weapons, and operation systems. These systems should consist of integrated composition and the function of analyzing and sharing data. Accordingly, military C4I collects and analyzes a lot of data and produces and shares secrets to perform effective operations. However, C4I cannot operate in electronic form from secret production to disposal. And as it is managed based on the output, problems such as difficulty in management and loss/leakage arise. Therefore, in this paper, we propose an ESDMB(Electronic Secret Document Management whit Bloockchain) plan based on blockchain technology to manage all secrets in electronic document format and provide integrity and denial prevention. In particular, the blockchain-based proposal method will be suitable as a protection measure against manipulation and leakage, from secret production to destruction.

• Electronics and Telecommunications Trends
• /
• v.30 no.4
• /
• pp.92-101
• /
• 2015

미래 전장은 정보 지식 기반의 첨단 전력체계를 확충하기 위해 향후 전력구조를 통합, 지휘통제통신(C4I) 체계와 생존성과 통합성이 향상된 전장의 네트워크중심전(NCW) 수행능력을 향상시킬 것이다. 사이버물리시스템(Cyber-Physical Systems: CPS)은 함정전투체계에 적용되고 있는 DDS를 포함하여 국방 M&S의 근간인 Live, Virture, Constructive(L-V-C) 체계의 큰 축을 형성하고 있다. 사물인터넷(Internet of Things: IoT) 기술은 센서네트워크, 통신, Radio Frequency Identification(RFID), Ubiquitous Sensor Network(USN), Machine to Machine(M2M), D2D 기술 및 상황인지, 지능서비스를 위한 정보수집/가공/융합/분석/예측기술을 포괄적으로 포함한 기술로서 미래산업을 이끌어 갈 차세대 선도 기술이며, 특히 군사적으로도 감시정찰 센서네트워크(USN), 견마형로봇, 경전투로봇과 무인기 기술 및 전술정보통신망체계(TICN) 등 첨단 통신네트워크 기술의 전력화 추세는 IoT 기술의 적용영역을 넓혀주고 있다. 감시정찰체계(Sensor)에서는 감시정찰 분야 영상정보 처리, 표적탐지 등과 관련된 IoT 기술 소요와 지휘통제통신(C4I) 체계의 상호운용성, 데이터링크, 지능형 통신체계 등 C4I 관련 IoT 기술 소요 및 타격체계(Shooter)의 내장형 SW 등 유 무인 무기체계 관련 IoT 기술의 소요가 증대될 것으로 예상된다. 본고는 CPS 및 IoT 기술의 군사적 활용방안 및 획득전략에 대한 적용기술 및 발전방향을 살펴본다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.05a
• /
• pp.289-292
• /
• 2002

2계 선형 상미분방정식의 경계치 문제는 보통 해를 구하고자 하는 구간의 양 끝점에서 도함수의 값을 임의로 선정한 후 각 점에서 초기치 문제의 해를 구한 다음 적절한 1차 결합을 이용하여 구하게 된다. 이 경우 초기값과 도함수 값을 사용한 반복연산이 수반되며 따라서 오차의 누적이 불가피 하게 된다. 이 논문에서는 이같은 오차의 누적을 피할 뿐 아니라 3차 Spline 함수를 사용함으로써 오차가 O( $h^2$)인 해를 구하는 방법에 대하여 기술한다 두 개의 경계조건과 근사값을 구하고자 하는 점에서의 함수 값을 "If x is $B_{i}$, then f is $C_{i}$"와 같은 Fuzzy Rule들로 변형하고 주어진 미분방정식을 상수 $C_{i}$들의 관계식으로 변형하여 해를 구하였다. 산출된 결과로부터의 보간 연산은 Fuzzy System사용에 의하여 대체되었다. 이상의 방법으로 산출한 해의 근사오차가 O( $h^2$).임을 증명하였으며 3개의 예제에 대한 계산결과를 4계 Runge-Kutta 방법에 의한 해와 비교하여 기술하였다였다였다였다

• Journal of the Korean Chemical Society
• /
• v.21 no.6
• /
• pp.395-403
• /
• 1977

Significant structure theory was applied to some liquid mixture systems ranging from simple monatomic molecule systems to polyatomic molecule systems, and the activity coefficients ${\gamma}$ of the liquid mixture systems were calculated over whole mole fractions using the following thermodynamic relation $RTln_{{\gamma}i} = (\frac{{\partial A}^E}{{\partial N}_i})_{T,V,N_i} $ where $A^E$ represents the excess Helmholtz free energy, and $N_i$ is the number of molecules of component i. The activity coefficients of the solutions such as monatomic molecule systems (Ar-Kr, Kr-Xe) and diatomic molecule systems $(Ar-O_2,\;N_2-CO)$ and $CH_4-Kr$ systems whose components have similar shapes for intermolecular potential curves were calculated successfully only with the ${\delta}E_s$, correction parameter for energy $E_s$, for mixture systems. For other systems such as $Ar-N_2,\;O_2-N_2\;and\;CH_4-C_3H_8$ whose components have dissimilar intermolecular potential curve shapes an additional correction parameters ${\delta}$V and even one more parameter ${\delta}$n were necessary [see Eqs.(10)∼(12)].

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.3
• /
• pp.639-648
• /
• 2015

SInce 2000, Instrumentation and Control(I&C) systems of Nuclear Power Plant(NPP) based on analog technology began to be applied to the digital technology. NPPs under construction in the country with domestic APR1400 I&C system, most devices were digitalized. Cyber security of NPP I&C systems has emerged as an important issue because digital devices compared to the existing analog equipment are vulnerable to cyber attacks. In this paper, We proposed the risk rating process of cyber security threats in NPP I&C system and applied the proposed process to the Reactor Protection System(RPS) developed through Korea Nuclear Instrumentation & Control System(KINCS) project for evaluating the risk of cyber security threats.

• The Journal of Korean Association of Computer Education
• /
• v.7 no.6
• /
• pp.129-139
• /
• 2004

In developing highly reliable systems such as C4I systems formal methods provide both developers and clients with assurance that they are in the right development processes. This paper investigates into techniques for formal specifications and tests for software components where rigorous verification is required. In particular, the paper suggests decomposition techniques for state-model based specifications using the weakest precondition, and suggests test methods for the specification by generating black box test-cases.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.4
• /
• pp.297-303
• /
• 2005

In this paper, I developed an intelligent multi agents based softPLC(IMPLC). In IMPLC, the standard IEC 1131-3 PLC languages(LD, SFC, FBD, ST) programmed by a user are converted to IL, which is one of intermediate codes, in order to make them interactions. And then the IL is converted to the standard C code regarding some extension and transplanting, which can be used in a commercial editor such as visual C++. In IMPLC, the logical errors and syntax errors occurred by users are detected, so that the optimal PC control based softPLC can be possible. IMPLC provide easy programming platform to such beginner as well as professionals. The study of code conversion is firstly tried in the world as well as KOREA. I applied IMPLC to 3 steps conveyer belt system. The simulation results say that the debugging steps by IMPLC using multi agents are decreased than the conventional softPLC's.