• Title/Summary/Keyword: C2C

Search Result 98,329, Processing Time 0.091 seconds

Analyzing the Significance of T1 Slope minus Cervical Lordosis in Patients with Anterior Cervical Discectomy and Fusion Surgery

  • Lee, Ho Jin;You, Soon Tae;Sung, Jae Hoon;Kim, Il Sup;Hong, Jae Taek
    • Journal of Korean Neurosurgical Society
    • /
    • v.64 no.6
    • /
    • pp.913-921
    • /
    • 2021
  • Objective : Accurate measurement of T1 slope (a component of T1s minus cervical lordosis [CL]) is often constrained by anatomical limitations. In this situation, efforts should be made to find the exact meaning of T1s-CL and whether there are any alternatives to it. Methods : We enrolled 117 patients who received two-level anterior cervical discectomy and fusion (ACDF). Occipital slope, C2 slope (C2s), C7 slope (C7s), T1, O-C2 angle (O-C2A), C2-7 angle (C2-7A), O-C7 angle (O-C7A), T1s-CL, C7-T1 angle (C7-T1A), and C2-7 sagittal vertical axis were measured. We determined 16° (T1s-CL) as the reference point for dividing subjects into the mismatch group and the balance group, and a comparative analysis was performed. Results : The mean value of C7-T1A was constantly maintained within 2.6° peri-operatively. In addition, C2s and T1s-CL showed the same absolute change (Δ|0.8|°). The mean values of T1s-CL of the mismatch and balance groups were 23.0° and 7.6°, respectively. The five factors with the largest differences between the two groups were as follows : C2s (Δ13.3°), T1s-CL (Δ15.4°), O-C2A (Δ8.7°), C2-7A (Δ14.7°), and segmental angle (Δ7.9°) before surgery. Only four factors showed statistically significant change between the two groups after ACDF : T1s-CL (Δ4.0° vs. Δ0.2°), C2s (Δ3.2° vs. Δ0.7°), O-C2A (Δ2.6° vs. Δ1.3°), C2-7A (Δ6.3° vs. Δ1.3°). A very strong correlation between T1s-CL and C2s was also found (r=|0.88-0.96|). Conclusion : C2s itself may be the essential key to represent T1s-CL. The amounts and directions of change of these two factors (T1s-CL and C2s) were also almost identical. The above phenomenon was re-confirmed once again through the correlation analysis.

The Structure and Energy of D-Sorbitol from an Empirical force-Field (Empirical Force-Field 방법에 의한 D-Sorbitol 의 구조와 에너지에 관한 연구)

  • Park Young Ja
    • Journal of the Korean Chemical Society
    • /
    • v.29 no.2
    • /
    • pp.104-110
    • /
    • 1985
  • Empirical force-field method has been applied to D-sorbitol, the crystal structure of which has been studied by the single crystal X-ray and neutron diffraction analyses. The calculated C-C bond lengths agree with those observed within 0.009${\AA}$. The C-O bond lengths show a larger deviation of 0. 023${\AA}$. The calculated C-C-C and C-C-O valence angles agree with those observed within $2.3^{\circ}$ and $1.9^{\circ}$respectively. Because torsion angles are influenced by packing forces, they show considerably flarger r. m. s. deviations. Calculations of the conformational energies of the model compound at selected C(1)-C(2)-C(3)-C(4) torsion angles made with the program MMI, produced result that the prediction of the observed preferred conformation of the carbon chain appeares to be less satisfactory.

  • PDF

$^{13}C-Nuclear$ Magnetic Resonance of the Phenolic Compounds (I) -A Systematic Evaluation of the Chemical Shifts of the Phenolic Compounds- (Phenol성(性) 화합물(化合物)의 $^{13}C$-핵자기(核磁氣) 공명(共鳴)(I) -Phenol성(性) 화합물(化合物)의 Chemical Shift에 관(關)한 연구(硏究)-)

  • Ahn, Byung-Zun
    • Korean Journal of Pharmacognosy
    • /
    • v.8 no.1
    • /
    • pp.17-21
    • /
    • 1977
  • $^{13}C-NMR$ behaviors of phenolic compounds such as phenol, catechol, pyrogallol, resorcine, phoroglucine and hydroquinone were studied. From the study on the effects of OH-substitution on benzene and its dervatives it was found that the additivity rule can be applied to the ortho-and para-effect but not to the meta-effect for the OH-function. The empirically calculated chemical shifts regarding the o-and p-effects coincide very well with the results of measurement. The chemical shifts of the phenolic compounds can be classified into three types. 1) Catechol-type C-1 and C-2 145 ppm C-3 and C-6 116-107 ppm 2) Pyrogallol-type C-1 132ppm C-2 and C-6 146ppm C-3 and C-5 106ppm 3) Resorcin-type C-1 and C-3 159ppm C-2 103-95ppm C-4 and C-6 107ppm

  • PDF

Fatty Acid Composition of Achatina fucica Bowdich and Ampullarius insularus (식용달팽이와 왕우렁이의 지방산 조성)

  • Park, Il-Woong;Kim, Choong-Ki
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.21 no.1
    • /
    • pp.36-42
    • /
    • 1992
  • The lipid compositions of total lipid extracted from the flesh divided into albinic type and melanic type of culture shellfishes, i.e. Achatina fucica Bowdich, Ampullarius insularus were compared. Total lipid contents of shellfishes were $1.11{\sim}3.25%$, the levels were appeared higher in Ampullarius insularus than Achatina fucica Bowdich, and in albinic type than melanic type. It was found that the contents of neutral lipids $(31.79{\sim}40.60%)$ and phospholipids $(50.95{\sim}62.12%)$ were high, while that of glycolipids $(4.84{\sim}9.47%)$ were low. The major fatty acids in total lipid of each sample were $C_{18:2}(11.92{\sim}14.37%)$, $C_{18:1}(12.34{\sim}13.64%)$, $C_{20:4}(11.03{\sim}13.74%)$, $C_{16:0}(7.45{\sim}15.39%)$ and $C_{18:0}(7.34{\sim}11.80%)$ and additionally $C_{20:2}(9.62{\sim}10.19%)$ in Achatina fucica Bowdich, and the major fatty acid composition in total lipids of each sample showed no significant differences between albinic type and melanic type, respectively. Particularly the content of $C_{16:0}$ in total lipids was shown more abundant in Ampullarius insularus and that of $C_{18:0}$, C_{20:2}$ in Achatina fucica Bowdich. The content of polyene acids in total lipids occupied higher level in Achatina fucica Bowdich but $C_{22:6}$ was almost detected, and observed relatively higher amounts in Ampullarius insularus. The main fatty acids in neutral lipid of Achatina fucica Bowdich were $C_{18:2}(16.80{\sim}17.74%)$, $C_{20:2}(12.15{\sim}12.59%)$, $C_{18:1}(9.79{\sim}10.37%)$, $C_{18:0}(7.71{\sim}12.43%)$ and C_{16:0},\;C_{20:4}$ and additionally $C_{18:3} (20.90%)$ was shown predominant in melanic type and the level of polyene acid highest in neutral lipids. The neutral lipids in each type of Ampullarius insularus were mainly composed of $C_{16:0}(16.96{\sim}17.46%)$, $C_{18:1}(13.79{\sim}13.95%)$ and $C_{18:2} (12.90{\sim}15.70%)$ and additionally it chiefly consisted of $C_{18:1}$, $C_{20:4}$and$C_{22:6}$. The major fatty acids in each type of glycolipids were $C_{18:2}(19.01{\sim}19.72)$, $C_{16:0}(12.89{\sim}18.76%)$ and $C_{18:0}(12.68{\sim}17.52%)$ and additionally $C_{18:1}$ in Achatina fucica Bowdich, but $C_{22:1}$ was detected in relatively higher level by 6.95% in albinic type only. The major fatty acids in glycolipids were $C_{18:2}(12.46{\sim}18.21%)$, $C_{16:0}(10.43{\sim}18.48%)$, $C_{20:1}(10.51{\sim}14.59%)$, $C_{20:4}(8.24{\sim}12.34%)$ and additionally it chiefly consisted of $C_{18:0}\;and\;C_{18:1}$ in Ampullarius insularus. The fatty acid composition in phospholipids of each sample was very resembled to total lipids, respectively.

  • PDF

POSSIBLE EMISSION STRUCTURE OF $C_2H$ IN THE 2.5 MICRON INFRARED SPECTRA OF COMETS

  • KIM SANG JOON;SAMARASINHA NALIN H.
    • Publications of The Korean Astronomical Society
    • /
    • v.14 no.1
    • /
    • pp.33-37
    • /
    • 1999
  • We have constructed a synthetic spectrum of the 2.5 micron $C_2H$ bands and compared them with diminutive structures in the near-infrared spectra of Comets P/Halley and West (1976 VI). We found that the Q branches of the $C_2H$ bands coincide with two small emission peaks in the spectra of the comets. We undertook Monte Carlo simulations using observed emission intensities of $C_2$ and possibly $C_2H$ in Comet P/Halley in order to derive a lifetime range of $C_2H$ and a production rate at the time of observations of P/Halley. We obtained a $C_2H$ production rate of $1\times10^{27}\;sec^{-1}$ for P/Halley on December 20, 1985, assuming the 2.5 micron features are due to $C_2H$. We derived a very short lifetime (<100 seconds) of $C_2H$ at 1AU heliocentric distance, assuming that the only parent molecule for $C_2H$ and $C_2$ is $C_2H$. Using this short lifetime we were unable to fit our $C_2$ distribution model to $C_2$ distribution curves observed by O'Dell et al.(1988), because our curve shows a steep slope compared with the observed one. We conclude that there must be significant additional source(s) for $C_2H$ and $C_2$ other than $C_2H_2$.

  • PDF

Thermodynamic Comparison of Silicon Carbide CVD Process between CH3SiCl3-H2 and C3H8-SiCl4-H2 Systems (탄화규소 CVD 공정에서 CH3SiCl3-H2과 C3H8-SiCl4-H2계의 열역학적 비교)

  • Choi, Kyoon;Kim, Jun-Woo
    • Korean Journal of Metals and Materials
    • /
    • v.50 no.8
    • /
    • pp.569-573
    • /
    • 2012
  • In order to understand the difference in SiC deposition between the $CH_3SiCl_3-H_2$ and $C_3H_8-SiCl_4-H_2$ systems, we calculate the phase stability among ${\beta}$-SiC, graphite and silicon. We constructed the phase-diagram of ${\beta}$-SiC over graphite and silicon via computational thermodynamic calculation considering pressure (P), temperature (T) and gas composition (C) as variables. Both P-T-C diagrams showed a very steep phase boundary between the SiC+C and SiC region perpendicular to the H/Si axis, and also showed an SiC+Si region with a H/Si value of up to 6700 in the $C_3H_8-SiCl_4-H_2$, and 5000 in the $CH_3SiCl_3-H_2$ system. This difference in phase boundaries is explained by the ratio of Cl to Si, which is 4 for the $C_3H_8-SiCl_4-H_2$ system and 3 for the $C_3H_8-SiCl_4-H_2$ system. Because the C/Si ratio is fixed at 1 in the $CH_3SiCl_3-H_2$ system while it can be variable in the $C_3H_8-SiCl_4-H_2$ system, the functionally graded material is applicable for better mechanical bonding during SiC coating on graphite substrate in the $C_3H_8-SiCl_4-H_2$ system.

Electrical characteristics of In-situ doped polycrystalline 3C-SiC thin films (In-situ 도핑된 다결정 3C-SiC 박막의 전기적 특성)

  • Kim, Kang-San;Chung, Gwiy-Sang
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2008.11a
    • /
    • pp.137-137
    • /
    • 2008
  • In-situ doped polycrystalline 3C-SiC thin films were deposited by APCVD at $1200^{\circ}C$ using HMDS(hexamethyildisilane: $Si_2(CH_3)_6)$) as Si and C precursor, and 0 ~ 100 sccm $N_2$ as the dopant source gas. The peak of SiC is appeared in polycrystalline 3C-SiC thin films grown on $SiO_2$/Si substrates in XRD(X-ray diffraction) and FT-IR(Fourier transform infrared spectroscopy) analyses. The resistivity of polycrystalline 3C-SiC thin films decreased from 8.35 $\Omega{\cdot}cm$ with $N_2$ of 0 sccm to 0.014 $\Omega{\cdot}cm$ with 100 sccm. The carrier concentration of poly 3C-SiC films increased with doping from $3.0819\times10^{17}$ to $2.2994\times10^{19}cm^{-3}$ and their electronic mobilities increased from 2.433 to 29.299 $cm^2/V{\cdot}S$, respectively.

  • PDF

A Study on the Hydrolysis of p-Nitrophenyl Carboxylates by Micellar Surfactants Catalysts Involving Histidyl Residue (히스티딜기등을 포함하는 미셀성 계면활성제를 촉매로 사용한 파라니트로페닐 에스테르의 가수분해반응에 관한 연구)

  • Won Fae Koo;Choon Pyo Hong
    • Journal of the Korean Chemical Society
    • /
    • v.33 no.1
    • /
    • pp.3-10
    • /
    • 1989
  • In order to obtain a clue in understanding enzymatic hydrolysis in which the His-Cys moieties of papain protease is involved, we prepared cationic peptide-sufactants bearing histidyl, cysteinyl, and both histydyl and cysteinyl residues. Their catalytic efficiency toward the hydrolysis of PNPL were investigated in comicellar phases formed with $N^{+}C_{2}CysC_{12}$, $N^{+}C_{2}HisC_{12}$, $N^{+}C_{2}HisCysC_{12}$ increased markedly in the same order compared with that of $N^{+}C_{2}AlaC_{12}$. The markedly increased catalytic effects are attributed to the imidazole groups of $N^{+}C_{2}HisC_{12}$ and the thiol groups of $N^{+}C_{2}CysC_{12}$, and the large catalytic efficiency of $N^{+}C_{2}HisCysC_{12}$, is considered due to the interaction of the imidazole and the thiol groups. In order to investigate catalytic activities, rate constants for the functional groups, km* and dissociation constants, pKa have been determined. The results showed that $k^{\ast}_m$ and pKa of the imidazole groups were $7.91{\times}10^{-4}S^{-1}$ and 6.49, and those of the thiol groups were $6.00{\times}10^{-4}S^{-1}$ and 10.50. The catalytic effects of comicellar systems on the hydrolysis of p-nitrophenyl esters has increased according to the increasing size of the alkyl carbon number. Therefore, the catalytic effects have been increasing by the interaction of micellar hydrophobic parts and substrates as well as action of the functional groups.

  • PDF

Global Carbon Cycle and Budget Study (지구규모의 탄소 순환 및 물질수지 연구)

  • 권오열
    • Journal of Environmental Science International
    • /
    • v.5 no.4
    • /
    • pp.429-440
    • /
    • 1996
  • A global carbon cycle model (GCCM), that incorporates interaction among the terrestrial biosphere, ocean, and atmosphere, was developed to study the carbon cycling aid global carbon budget, especially due to anthropogenic $CO_2$ emission. The model that is based on C, 13C and 14C mass balance, was calibrated with the observed $CO_2$ concentration, $\delta$13C and $\Delta$14C in the atmosphere, Δ14C in the soil, and $\Delta$14C in the ocean. Also, GCCM was constrained by the literature values of oceanic carbon uptake and CO, emissions from deforestation. Inputs (forcing functions in the model) were the C, 13C and 14C as $CO_2$ emissions from fossil fuel use, and 14C injection into the stratosphere by bomb-tests. The simulated annual carbon budget of 1980s due to anthropoRenic $CO_2$ shows that the global sources were 5.43 Gt-C/yr from fossil fuel use and 0.91 Gt-C/yr from deforestation, and the sinks were 3.29 Gt-C/yr in the atmosphere, 0.90 Gt-C/yr in the terrestrial biosphere and 2.15 Gt-C/yr in the ocean. The terrestrial biosphere is currently at zero net exchange with the atmosphere, but carbon is lost cia organic carbon runoff to the ocean. The model could be utilized for a variety of studies in $CO_2$ policy and management, climate modeling, $CO_2$ impacts, and crop models.

  • PDF

Preparation of Zirconium Carbide Powders from $ZrCl_4$-Mg-C System ($ZrCl_4$-Mg-C 계 반응에 의한 탄화지르코늄(ZrC) 분체의 합성)

  • 김원영;김성현;장윤식;박홍채;오기동
    • Journal of the Korean Ceramic Society
    • /
    • v.28 no.4
    • /
    • pp.315-323
    • /
    • 1991
  • The preparation of zirconium carbide powders by the halogenide process of ZrCl4-C-Mg system (1:1:2, molar ratio) was studied between 300。 and 120$0^{\circ}C$ under Ar gas flow (200 mι/min). The formation mechanism and kinetics of zirconium carbide and characteristics of the synthesized powder were examined by TG-DTA, XRD, SEM and PSA. 1) The formation mechanism of zirconium carbide were as follows, above 30$0^{\circ}C$ ZrCl4(S)+Mg(s)longrightarrowZrCl2(s)+MgCl2(s) above 40$0^{\circ}C$ ZrCl2(S)+Mg(s)longrightarrowZr(s)+MgCl2(s) above 50$0^{\circ}C$ Zr(s)+C(s)longrightarrowZrC(s) 2) The apparent activation energy of the reduction-carbonization at temperature of 800$^{\circ}$to 100$0^{\circ}C$ was 11.9 kcal/mol. 3) The lattice parameter and the crystallite size of ZrC which was produced from the mixture powder of ZrCl4, C and Mg (1:1:2, molar ratio) at 100$0^{\circ}C$ for 1 h were 4.700A and 180A, respectively. 4) The powders obtained from the mixture powder of ZrCl4, C and Mg(1:1:2, molar ratio) at 100$0^{\circ}C$ for 1 h were agglomerate with the average size of about 13${\mu}{\textrm}{m}$ in SEM micrograph.

  • PDF