• Bulletin of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.900-906
• /
• 2004

An RPLC-postcolumn detection method has been developed for the fluorimetric determination of dichloroacetamide (DCAD) in water. After ammonia and DCAD were separated on a $C_{18}$ nonpolar stationary phase with 2.5% methanol-0.02 M phosphate buffer at pH 3, the column eluant was reacted with post column reagents, o-phthaldialdehyde (OPA) and sulfite ion at pH 11.5, to produce a highly fluorescent isoindole fluorophore, which was measured with a fluorescence detector ( ${\lambda}_{ex}$ = 363 nm, ${\lambda}_{em}$ = 425 nm). With the optimized conditions for RPLC and the postcolumn derivatization, the calibration curve was found to be linear in the concentration ranges of 0.5 and 20 ${\mu}$M for DCAD, and the detection limit for DCAD was 0.18 ${\mu}$M (23${\mu}$g/L). This corresponded to 18 pmol per 100 ${\mu}$L injection volume for a signal-to-noise ratio of 3, and the repeatability and reproducibility of this method were 1.0% and 2.5% for five replicate analyzes of 2 ${\mu}$M DCAD, respectively. The degradation yields DCAD to ammonia were 94 and 99%, and the percent recoveries of DCAD from 4 and 6 ${\mu}$M DCAD-spiked tap water were shown mean more than 97%.

• Journal of the Korean Society of Food Culture
• /
• v.30 no.6
• /
• pp.790-796
• /
• 2015

The objective of this study was to investigate the physicochemical properties and antioxidant activities of seven (A, B, C, D, E, F, G) commercial ketchups marketed in Korea. The 70% ethanol extracts were prepared and evaluated for total phenolic content, DPPH and ABTS radical scavenging activities, and metal chelating effect. pH ranged from 3.64 to 3.94, and soluble solid and reducing sugar contents of samples were 2.21~3.51oBrix and 4.78~13.45%, respectively. Salinity of samples was in the range of 1.79 to 3.21%, and sample G showed the lowest salinity. The lightness, redness, and yellowness of the Hunter color system of samples were 15.42~19.94, 18.55~23.98, and 20.87~24.34, respectively. The phenolic contents ranged from 1.37 to 2.60 mg GAE (gallic acid equivalents)/g, with samples F and G exhibiting the highest contents. Antioxidant activity determined based on DPPH and ABTS radical scavenging activities, and metal chelating effects were 45.10~90.87, 55.35~92.53, and 71.10~92.20%, respectively, at a concentration of 200 mg/mL. Samples A and G showed higher antioxidant activity than other samples. There were positive correlations between phenolic contents and antioxidant activity, suggesting that phenolic compounds are the major contributors to antioxidant activity.

• Journal of the Korean institute of surface engineering
• /
• v.48 no.1
• /
• pp.23-26
• /
• 2015

What causes the transformation of a solar cell is the behavior difference of thermal expansion occurred between the substrate and the layer of semiconductor used in the solar cell. Therefore, the substrate has to possess a behavior of thermal expansion that is similar with that of semiconductor layer. This study employed electroforming to manufacture Fe-Ni alloy materials of different compositions. To verify the result from a finite element analysis, a two-dimensional Mo substrate was calculated and its verification experiment was conducted. The absolute values from the finite element analysis of Mo/substrate structure and its verification experiment showed a difference. However, the size of residual stress of individual substrate compositions had a similar tendency. Two-dimensional CIGS/Mo/$SiO_2$/substrate was modeled. Looking into the residual stress of CIGS layer occurred while the temperature declined from $550^{\circ}C$ to room temperature, the smallest residual stress was found with the use of Fe-52 wt%Ni substrate material.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.6
• /
• pp.653-656
• /
• 1997

The new unsymmetric $N_6$ ligand 1-amino-13-(2-pyridyl)-3,6,9,12-tetraazatridecane (aptatd) containing one pyridyl group has been synthesized and characterized by EA, IR, and NMR. Its proton association constants $(log K_H^n)$ and stability constants $(log K_{ML})$ for Co(Ⅱ), Ni(Ⅱ), Cu(Ⅱ), and Zn(Ⅱ) ions were determined at 298.1 K and ionic strength 0.100 mol $dm^{-3}$ (KNO₃) in aqueous solution by potentiometry: log $K_H^1$=8.80, log $K_H^2$=8.49, log $K_H^3$=6.84, log $K_H^4$=4.17, log $K_H^5$=3.47; log $K_{ML}(Co^{2+})$=18.00, log $K_{ML}(Ni^{2+})$=21.31, log $K_{ML}(Cu^{2+})$=23.62, log $K_{ML}(Zn^{2+})$=15.60. The X-ray structure of its nickel(Ⅱ) complex [Ni(aptatd)]$(ClO_4)_2$ are reported: orthorhombic space group Pbca, a=15.715(1) Å, b=14.280(2) Å, c=19.443(2) Å, V=4363.4 (9) ų with Z=8. The geometry around nickel is a distorted octahedron with the pyridine nitrogen atom being cis to the nitrogen atom of the terminal primary amine.

• Archives of Pharmacal Research
• /
• v.6 no.1
• /
• pp.17-23
• /
• 1983

By tracing albumin stabilizing activity an anti-inflammatory component, continentalic acid was isolated from ether-soluble acidic fraction of Aralia continentalis. Continenetalic acid in a concentration of 0.115mg/3ml gave 50% inhibition for heat denaturation of albumin. The protein stabilizing potency of it was approximately three and eleven times that of phenylbutazone and that of salicylic acid, respectively. The anti-inflammatory actions of it and its methylester were investigated employing carrageenin-induced edema in rat paw. Continentalic acid administered s. c. showed an activity of about three times of hydrocortisone. When administered p. o., it was still active, but its methylester was more active than phenylbutazone, suggesting the poor absorption of it in gastorointestinal tract. Its chemical structure was identified by chemical and spectral studies as (-) pimara 8(14), 15-diene-19-oic acid, which was already isolated from A. dordata, but not reported for its biological activity.

• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.1
• /
• pp.55-62
• /
• 2019

The respirometric technique has been used to analyze the nitrification process in a sequencing batch reactor(SBR) treating municipal wastewater. Especially the profile of the respiration rate very well expressed the reaction characteristics of nitrification. As the nitrification process required a significant amount of oxygen for nitrogen oxidation, the respiration rate due to nitrification was high. The maximum nitrification respiration rate, which was about $50mg\;O_2/L{\cdot}h$ under the period of sufficient nitrification, was related directly to the nitrification reaction rate and showed the nitrifiers activity. The growth rate of nitrifiers is the most critical parameter in the design of the biological nutrient removal systems. On the basis of nitrification kinetics, the maximum specific growth rate of nitrifiers in the SBR was estimated as $0.91d^{-1}$ at $20^{\circ}C$, and the active biomass of nitrifiers was calculated as 23 mg VSS/L and it was about 2% of total biomass.

• International Journal of Knowledge Content Development & Technology
• /
• v.9 no.3
• /
• pp.23-41
• /
• 2019

This study combines the concept of degree centrality in complex network with the Term Frequency $^*$ Proportional Document Frequency ($TF^*PDF$) algorithm; the combined method, called PMCN (PDF-Modified similarity and Complex Network), constructs relationship networks among sentences for writing news summaries. The PMCN method is a multi-document summarization extension of the ideas of Bun and Ishizuka (2002), who first published the $TF^*PDF$ algorithm for detecting hot topics. In their $TF^*PDF$ algorithm, Bun and Ishizuka defined the publisher of a news item as its channel. If the PDF weight of a term is higher than the weights of other terms, then the term is hotter than the other terms. However, this study attempts to develop summaries for news items. Because the $TF^*PDF$ algorithm summarizes daily news, PMCN replaces the concept of "channel" with "the date of the news event", and uses the resulting chronicle ordering for a multi-document summarization algorithm, of which the F-measure scores were 0.042 and 0.051 higher than LexRank for the famous d30001t and d30003t tasks, respectively.

• Membrane and Water Treatment
• /
• v.12 no.1
• /
• pp.23-35
• /
• 2021

A POM-membrane was fabricated by immobilizing a keggin type polyoxometalate (POM) H5PV2Mo10O40 onto the surface of microporous flat-sheet polymeric polyvinylidene fluoride (PVFD) membrane using a chemical deposition method. The POM-membrane was characterized by FT-IR, SEM and EDX to confirm existing of the POM onto the membrane surface. The POM-membrane was used to remove an anionic textile dye (Reactive Black 5 named as an RB5) from aqueous phases with a cross-flow membrane filtration and a batch adsorption system. The dye removal efficiency of the POM-membrane using the cross-flow membrane filtration system and the batch adsorption system was about 88% and 98%, respectively. The influence factors such as contact time, adsorbent dosage, pH, and initial dye concentration were investigated to understand the adsorption mechanism of the RB5 dye onto the POM-membrane. To find the best fitting isotherm model, Langmuir, Freundlich, BET and Harkins-Jura isotherm models were used to analyze the experimental data. The isotherm analysis showed that the Langmuir isotherm model was found to the best fit for the adsorption data (R2 = 0.9982, qmax = 24.87 mg/g). Also, adsorption kinetic models showed the pseudo second order kinetic model was found the best model to fit the experimental data (R2 = 0.9989, q = 8.29 mg/g, C0 = 15 ppm). Moreover, after four times regeneration with HNO3 acid, the POM-membrane showed high regenerability without losing dye adsorption capacity.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2002.11a
• /
• pp.103-105
• /
• 2002

This study was conducted to determine how broiler performance with the level of crude protein(23 CP%, 21 CP% and 19 CP%) can be changed and affected, adding Alum(Al$_{2}$(SO$_{4}$)$_{3}$ㆍ14H$_{2}$O) and no Alum in litter(two ALUM levels and 3 Protein levels with 2$\times$3 factorial design). Alum was added as a top dressing to the litter at a rate of 200g ALUM / kg of rice bran. With the exception of the protein levels for feed ：gain(P〈 0.05), there were no significant differences in feed intake, weight gain and feed ：gain of chicks. For ammonia gas emission, both the main effects of Alum and protein(P〈 0.01 and 0.05) at 3weeks and interaction between Alum and protein(P〈 0.05), the main effect of Alum(P〈 0.01) at 6weeks did affected them. In litter excluded the main effects of Alum(P〈 0.05), there was a significant difference among N contents ranged from pH to the rate of C： Organic-N(P〈 0.01).

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.23-24
• /
• 2021

The use of recycled concrete aggregates (RCA) as a substitute for natural aggregates in new concrete produces both economic and environmental advantages. Most of the RCA applications for pavements have been primarily applied to support layers for roads and airfields. This paper summarizes a work completed at the University of Illinois in partnership with the O'Hare Modernization Program to examine the effect of coarse and fine RCA on the concrete's fresh and hardened properties for airfield rigid pavement applications. Ten different RCA concrete mixtures were prepared with the incorporation of different percentages of RCA fines as well as replacement of cement with high volume percentages of supplementary cementitious materials such as Class C fly ash and ground granulated blast furnace slag to improve the workability and long-term properties of RCA concrete. All the mixes on this stage included 100% recycled coarse aggregates and the Two-Stage Mixing Approach was used as a mixing procedure. Based on the results obtained in the research, mixes with high percentages of recycled fine and coarse aggregates could be used for construction of airfield concrete pavements in conjunction with supplementary cementitious materials