• Development and Reproduction
• /
• v.14 no.1
• /
• pp.13-19
• /
• 2010

We developed a novel dicistronic system for the expression of target cDNA sequences in the milk of transgenic animals using goat beta-casein/hGH fusion construct, pGbc5.5hGH (Lee, 2006) and internal ribosome entry site (IRES) sequences of encephalomyocarditis virus (EMCV). Granulocyte colony-stimulating factor (hG-CSF) cDNA was linked to 3' untranslated region of hGH gene in the pGbc5.5hGH via EMCV IRES sequences. Transgenic mice were generated by microinjection and transgene expression was examined in the milk and mammary gland of transgenic mice at 10 days of lactation. Northern blot analysis showed that hGH gene and hG-CSF cDNA were transcribed as a single dicistronic mRNA. The hG-CSF and hGH proteins were independently translated from the dicistronic mRNA and secreted into the milk of transgenic mice. The highest concentration of hG-CSF and hGH in the milk of transgenic mice were $237{\mu}g/m{\ell}$ and $8,990{\mu}g/m{\ell}$, respectively. In contrast, another hG-CSF expression cassette, in which hG-CSF genomic sequences were inserted into a commercial milk-specific expression vector (pBC1), generated a lower level ($91{\mu}g/m{\ell}$) of hG-CSF expression in the milk of transgenic mice. These results demonstrated that the novel pGbc5.5hGH-based dicistronic construct could be useful for an efficient cDNA expression in the milk of transgenic animals.

• Journal of the Korean Ceramic Society
• /
• v.32 no.8
• /
• pp.893-900
• /
• 1995

The porous wollastonite ceramics were fabricated after firing calcium silicates, obtained using natural resources and by-products of power plants by hydrothermal synthesis, without organic fibers or asbestos for reinforcement agent. A specimen from diatomite as a SiO2 staring raw material had the highest strength owing to normal grain growth and good densification from homogeneous sperhcial C-S-H hydrates. A specimen from SiO2 sol as a SiO2 starting raw material showed tobermolite, but fly ash and mixed system did xonotlite after hydrothermal synthesis. The specimen from fly ash showed the lowest firing shirikage and strength changes in the firing range from 50$0^{\circ}C$ to 120$0^{\circ}C$. The other phases in all specimens changed to wollastonite phase after firing at 100$0^{\circ}C$. Also the average pore size was distributed from 0.2${\mu}{\textrm}{m}$ to 2${\mu}{\textrm}{m}$.

• Journal of the Korean Home Economics Association
• /
• v.42 no.12 s.202
• /
• pp.69-76
• /
• 2004

The purpose of this study was to investigate the colorfastness of cotton and silk fabric dyed with extract of Lotus leaf princeps. The experimental items were classified into mordanting treatments, fabric components and kind of mordants. The experimental test was done by laundering, abrasion(dry/wet), perspiration(acid/alkali) , light fastness, color difference by C.C.M(computer color matching) system and K/S test. The summarized findings resulting from the experiment and investigation are as follows: In the C.C.M and K/S test on mordanting method and kind of fabrics, co-mordanting treatment method and protein fabric (silk) were the most effective. Especially, Fe mordanting treatment was higher than Al, Cu, Cr and none-mordanting. In colorfastness on the mordants, perspiration and laundering fastness showed high grade (4-5) but grades of perspiration(2-3/4) and light fastness(1-3) were low.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.191-194
• /
• 2009

PtRu based and PtSn based ternary catalysts were prepared by a conventional impregnation method using NaBH4 as reducing agent. The alloy formation, crystalline size and chemical composition of the in-house catalysts were determined by XRD, TEM and EDX, respectively. The chemical compositions of in-house catalysts were quite similar to the nominal value and good alloy formations were also observed. Further, crystalline sizes of ternary catalysts were comparatively smaller than binary catalysts and were approximately 3.5 ~ 5.5 nm. The electrochemical measurements were carried out in the solution 1 M $H_2SO_4$ with 1 M $C_2H_5OH$ at room temperature. LSV results obtained that ternary catalysts were higher current densities and specific activities. Especially, in case of tungsten addition system, Pt5Sn4W/C have the highest specific activities values and was approximately 21.2 and 3.1 times higher than that of PtRu/C and PtSn/C electrocatalyst.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1573-1576
• /
• 1997

Thin films of $BaTiO_3$ system were prepared by radio frequency (rf)/dc magnetron sputtering method. We have investigated crystal structure, surface morphology and PTCR(positive-temperature coefficient of resistance) characteristics of the specimen depending on second heat - treatment temperatures. Scanning electron microscope(SEM) image of $BaTiO_3$ thin films shows that the specimen heat treated in between 900 and 1100[$^{\circ}C$] shows a grain growth. At 1100[$^{\circ}C$], the specimen stops grain-growing and becomes a crystal. A resistivity-temperature characteristics of the specimen depends on the doping concentrations of Mn.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.12
• /
• pp.1747-1753
• /
• 2002

The objectives of this study were to examine the effect of early short-term temperature conditioning on metabolic rate and calpain/calpastatin system and to compare variations in metabolic rate and calpain/calpastatin system between Hanwoo and Holstein beef. Longissimus thoracis et lumborum of the right carcass from 3 Hanwoo and 3 Holstein bulls were removed within 30 min of exsanguinations, cut into three pieces, and then temperature conditioned until 3 h postmortem (PM) at 2, 16, and $30^{\circ}C$, respectively. Rigor values (R-values; $R_248$, $R_250$, and $R_258$), pH, muscle temperature, glycogen content, $\mu$- and m-calpain activities, and calpastatin acitivity were measured at 1, 3, 9, and 24 h PM, respectively. Hanwoo beef had higher muscle temperature, faster metabolic rate at early PM stage in R-values, and lower $\mu$-calpain activity than Holstein beef (p<0.05). The $30^{\circ}C$ treatment maintained muscle temperature of $30^{\circ}C$ until 3 h PM and resulted in faster pH decline at 3 and 9 h PM (p<0.05) than other treatments. The $16^{\circ}C$ had higher (p<0.05) muscle temperature at 3 h PM than the $2^{\circ}C$, but no difference in all other traits was observed between the $2^{\circ}C$ and the $16^{\circ}C$. Early shortterm temperature treatment used in this study was not sufficient to effectively activate calpain/calpastatin system. Correlations among all traits except m-calpain and muscle temperature were generally high (r>0.60; p<0.001). Among R-values, $R_258$ had higher correlations with other metabolic traits than those of $R_248$ and $R_250$. These data suggest that early PM metabolic rate, $\mu$-calpain activity, and calpastatin activity may be closely related to each other. Variations in metabolic rate and $\mu$-calpain activity at early PM stage between Hanwoo and Holstein beef may imply variations in meat quality between both breeds.

• Journal of the Korean Magnetics Society
• /
• v.23 no.2
• /
• pp.43-48
• /
• 2013

The Jahn-Teller distortion of chalcogenide $Fe_{0.9}M_{0.1}Cr_2S_4$ (M=Co, Ni, Zn) have been investigated by M$\ddot{o}$ssbauer spectroscopy. The crystal structures of $Fe_{0.9}M_{0.1}Cr_2S_4$ (M=Co, Ni, Zn) are cubic spinel at room temperature. Magnetoresistance measurements indicate these system is conducting-semiconducting transistion around $T_C$. Below $T_C$, the asymmetric line broadening is observed and considered to be dynamic Jahn-Teller distortion. Isomer shift value of the samples at room temperature was about 0.5 mm/s, which means that charge state of Fe ions is ferrous in character. The Ni substitutions for Fe occur to increase the Jahn-Teller relaxation. CMR properties could be explained with magnetic polaron due to Jahn-Teller effect, which is different from both the double exchange interactions of manganite system and the triple exchange interactions of chalcogenide $Cu_xFe_{1-x}Cr_2S_4$.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.129-130
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.663-664
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.451-452
• /
• 2007