• 제목/요약/키워드: C-tray

검색결과 104건 처리시간 0.046초

세척수 온도와 포장 형태에 따른 신선편이 치커리의 품질 변화 (Effect of Water Temperature and Packing Type on Quality of Fresh-cut Chicory)

  • 장민선;김건희;김병삼
    • 한국식품위생안전성학회지
    • /
    • 제22권4호
    • /
    • pp.279-287
    • /
    • 2007
  • 본 연구에서는 $1^{\circ}C$$5^{\circ}C$의 냉수와 $10^{\circ}C$의 지하수를 이용하여 세척한 후 PP film bag과 PETE tray로 포장하여 $4^{\circ}C$$10^{\circ}C$에서 9일간 저장하며 품질을 비교하였다. $10^{\circ}C$에서 저장하고 PP film bag에 보관한 세척하지 않은 치커리는 9일째 1.58%로 감모율이 가장 높았으나 $1^{\circ}C$ 냉수로 세척 처리한 후 PETE tray에 담아 $4^{\circ}C$에서 저장한 치커리는 0.14%로 감모율이 가장 낮게 나타났다. $1^{\circ}C$ 냉수로 세척처리한 후 PEIT tray에 담아 $4^{\circ}C$에서 저장한 경우 9일째 치커리의 호흡속도는 20.34 mg $CO_2/kg/hr$로 동일한 세척처리 후 PP film bag에 저장한 치커리의 호흡속도 26.12 mg $CO_2/kg/hr$보다 낮게 나타났다. 표면색의 변화에 있어서 시료별 개체차이가 심하여 L, a, b값의 유의적인 변화는 없었지만 저장 초기와 9일째를 비교하였을 경우 값이 전반적으로 다소 증가하였음을 알 수 있었고, 비타민 C는 $4^{\circ}C$의 저장고에서 저장한 경우가 $10^{\circ}C$에서 저장한 경우보다 비타민 C함량이 높게 유지되었다. 미생물에 있어서는 $1^{\circ}C$ 냉수로 세척 처리하고 PETE tray로 포장하여 $4^{\circ}C$에서 저장한 후 9일째의 치커리는 총균수 $2.59{\times}10^5CFU/g$, 대장균군수 $6.80{\times}10^2CFU/g$로 미생물수의 증식속도가 가장 느렸다. $1^{\circ}C$ 냉수로 세척하고 PETE tray로 포장하여 $4^{\circ}C$로 저장한 경우 치커리 고유의 초록색과 아삭한 조직감을 유지하고 있어 저온냉수 세척과 tray 포장이 세척 청경채의 선도 유지에 효과가 있는 것으로 나타났다.

세척 깻잎의 선도 유지에 대한 세척수 온도와 포장 형태의 영향 (Effect of Water Temperature and Packing Type on Quality of Fresh-Cut Sesame Leaf)

  • 김병삼;장민선;박신영;차환수;권기현
    • 한국식품영양과학회지
    • /
    • 제37권2호
    • /
    • pp.231-238
    • /
    • 2008
  • 본 연구에서는 1 및 $5^{\circ}C$의 냉수와 $13^{\circ}C$의 지하수를 이용하여 세척한 후 PP film bag과 PETE tray로 포장하여 4 및 $10^{\circ}C$에서 9일간 저장하며 품질을 비교하였다. $1^{\circ}C$ 냉각수로 세척하고 PETE tray로 포장한 경우 0.25%로 감모율이 가장 낮았고 이는 같은 냉수로 세척한 후 PP film bag로 포장한 0.39%보다 더 낮게 나타났다. 호흡속도는 $1^{\circ}C$ 냉수세척 처리하여 PETE tray로 포장하고 4 및 $10^{\circ}C$에서 저장한 9일 후 각각 45.71 및 53.15 mg $CO_2/kg/hr$로 PP film bag으로 포장한 경우보다 낮은 호흡률을 나타내었다. 표면색 변화에 있어서는 L 및 b값이 크게 변하지 않았고 비타민 C의 경우 초기 35 mg% 내외에서 저장 9일째에 $12{\sim}20\;mg%$로 감소하였으며, 1 및 $5^{\circ}C$의 세척수 온도별 유의적인 차이는 5 mg% 정도로 크지 않았다. 저장 9일째 $4^{\circ}C$에서 $1^{\circ}C$ 세척 처리하고 PETE tray로 포장하여 저장한 깻잎의 총균수는 $6.25{\times}10^4\;CFU/g$, 대장균군수는 $5.95{\times}10^2\;CFU/g$로 미생물수의 증식속도가 가장 느렸다. $1^{\circ}C$ 냉수로 세척하고 PETE tray로 포장하여 $4^{\circ}C$로 저장한 경우 깻잎 고유의 초록색과 향을 유지하고 있어 저온냉수 세척과 tray 포장이 세척 청경채의 선도 유지에 효과가 있는 것으로 나타났다.

비전 이미지 프로세싱을 이용한 외관검사가 가능한 기계시스템 및 비전 알고리즘 개발 (Development of the Mechenical System and Vision Algorithm for the External Appearance Test Using Vision Image Processing)

  • 김영춘;김영만;김성길;김홍배;조문택
    • 한국산학기술학회논문지
    • /
    • 제17권2호
    • /
    • pp.202-208
    • /
    • 2016
  • 본 논문에서는 저가의 카메라를 활용하여 육안 검사로 해왔던 c-tray와 관련된 불량을 비전 이미지 기술을 활용하여 자동으로 검사하였으며, 4대 검사항목인 트레이내 디바이스 겹침, 트레이 휨, 트레이 적재수량, 트레이내 디바이스 포켓 이탈 등 불량유형을 define 및 검출하는 알고리즘을 개발하였다. 따라서, 개발한 헨들링 시스템으로 인해 c-tray의 스택이나 기타 포장 공정에서의 수량 확인 공정 등에 확대 적용이 가능하였다. 그리고 제어를 활용한 비전 이미지를 처리하고 사용자 gui를 처리하는 제어프로그램과 스캔 속도에 맞춰 최적의 검사 이미지를 확보할 수 있는 기계 작동제어 프로그램을 개발하여 비전 데이터 처리와 이미지 획득이 가능한 기계 시스템을 설계하였다.

세척 청경채의 선도 유지에 대한 세척수 온도와 포장 형태의 영향 (Effect of Water Temperature and Packing Type on Quality of Fresh-cut Pak-choi)

  • 김병삼;장민선;박신영;차환수;권기현;김건희
    • 한국식품저장유통학회지
    • /
    • 제15권1호
    • /
    • pp.1-8
    • /
    • 2008
  • 본 연구예서는 1 및 $6^{\circ}C$의 냉수를 이용하여 세척한 후 PP film bag과 PETE tray로 포장하여 4및 $10^{\circ}C$에서 9일간 저장하며 품질을 비교하였다. $4^{\circ}C$에서 9일간 저장한 경우 1 및 $6^{\circ}C$에서 세척하고 PEIE tray로 포장한 청경채에서 감모가 거의 일어나지 않았다. $10^{\circ}C$ 저장고에서 9일째 저장한 경우 무처리하고 PP film bag으로 포장한 청경채의 감모율 0.37 %에 비하여 $1^{\circ}C$로 세척하고 PETE tray로 포장한 경우 감모율은 0.19 %로 낮게 나타났다. 호흡속도는 $1^{\circ}C$ 냉수 세척 처리하여 PETE tray로 포장하고 4및 $10^{\circ}C$에서 저장한 9일 후 각각 38.41 및 43.11mg $CO_2$/kg/hr로 PP film bag으로 포장한 청경채의 9일째 호흡속도 48.16및 59.47mg $CO_2$/kg/hr보다 낮게 나타났다. 저장 9일째 $1^{\circ}C$ 냉각수로 세척 처리하고 PETE tray로 포장하여 $4^{\circ}C$에 저장한 경우 무처리한 청경채의 총균수는 $1.0{\times}10^5$ CFU/g, 대장균군수는 $1.3{\times}10^1$ CFU/g였으며 6일째까지 대장균군수는 검출되지 않았다. PETE tray으로 포장된 경우보다 PP film bag로 포장된 경우 잎의 변색과 조직의 변화가 더욱 심하였으며 $1^{\circ}C$ 냉수로 세척하고 PETE tray로 포장하여 $4^{\circ}C$로 저장한 경우 청경채 고유의 초록색과 아삭한 조직감을 유지하고 있어 저온냉수 세척과 tray포장이 세척 청경채의 선도 유지에 효과가 있는 것으로 나타났다.

플라스틱 몰드 트레이 자동 투입장치 개발에 관한 연구 (A Study on the Development of Plastic Mold Tray Inserting Machine)

  • 이춘만;신성우
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 추계학술대회 논문집
    • /
    • pp.759-762
    • /
    • 2005
  • A tray inserting machine is developed for automation of inserting plastic mold tray into a cardboard box. Plastic mold tray is used for protecting breakdown of glass bottles. In this paper, two types of processes to divide the plastic mold tray are proposed. As a result, adhesion method by vacuum pad is accepted. And also, static and modal analysis for the machine are carried out to check the machine design using the commercial software, CATIA V5.

  • PDF

Transport Phenomena in Solid State Fermentation: Oxygen Transport in Static Tray Fermentors

  • Muniswaran, P.K.A.;Moorthy, S.Sundara;Charyulu, N.C.L.N.
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제7권6호
    • /
    • pp.362-366
    • /
    • 2002
  • A mathematical model has been developed for describing the oxygen concentration during the exponential growth of microorganisms, in a static solid substrate bed supported on a tray fermentor. The model equations comprise of one partial differential equation for mass transfer and an ordinary differential equation of growth. After nondimensionlisation, analytical solution tn the model has been obtained by the method of Laplace transforms. An expression for critical thickness of bed is deduced from the model equation. The significance of the model in the design of tray fermentors is discussed. The validity of the discussion is verified by taking an illustration from the literature.

인공무릎관절에 있어서 임플란트의 재료 및 고정방법에 따른 응력분석 (Stress Analysis of Total Knee System Depending on Implant Materials and Fixation Methods)

  • 조철형;조용균;최재봉;최귀원
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1997년도 추계학술대회
    • /
    • pp.484-488
    • /
    • 1997
  • Three-dimensional finite element analyses were used to compare the stress distribution and the stability of the fixation among seven different tibial components and to investigate the effect due to implant materials in total knee arthroplasty. The components included an intact tibia(Type I), Cemented Cobalt-Chromium tibial tray implanted with a PMMA cemented Co-Cr stem(Type II), Cemented Co-Cr tibial tray with a uncemented Co-Cr stem(Type III), Cemented Ultra High Molecular Weight Polyethylene (UHMWPE) tibial tray with a cemented UHMWPE stem (Type IV), Cemented UHMWPE tray with a uncemented UHMWPE stem(Type V), Cemented Co-Cr tray without a stem(Type VI), and Cemented UHMWPE tray without a stem(Type VII). Uncemented components were assumed to have complete bony in growth and a rigid state of fixation between component and bone. The interface between bone/cement/component of cemented components was also assumed to be fully bonded. Bi-condylar forces were applied. The results indicated that Uncemented stem components provided lower bone stress shielding and stress concentration. The UHMWPE tray and stem component showed better agreement with the intact tibia than the Co-Cr Alloy tray and stem components. If the implant tray can be fixed firmed without a stem, Cemented PE tray without a stem(Type VII) may be recommended to give the best characteristics in the sense of stress distribution and stability.

  • PDF

펄프 몰드식 육묘포트의 성형조건 및 수분 흡습에 따른 굴곡 하중 특성 분석 (Analysis of Flexural Strength of Seedling Pots Made by a Pulp-Molding Machine under Different Water Contents)

  • 송대빈;정준우;김철환;허무룡
    • 펄프종이기술
    • /
    • 제41권4호
    • /
    • pp.43-51
    • /
    • 2009
  • Paper mill sludges are discharged around 870,000 M/T annually. Only 30% of the paper mill sludge have been recycled and the rest has been disposed by land fill, incineration, ocean abandonment and other ways. Because of overall prohibition of sludge disposal by London Dumping Convention in 2012, a urgent counter measure for paper mill sludge must be provided. In this paper, some basic experiments were carried out to develop a tray cell pot using paper mill sludge for increasing the recycling potential of the wasted sludge. To establish the manufacturing parameters, the tray cell pots were made with three types of materials including virgin pulp, old news paper and corrugated board mixed in a blend tank of a molding machine. The bending force and moisture content of the produced tray cell pots was measured to confirm the application capability. The tray cell pot could be manufactured under the condition of over 20% of virgin pulp, 40% of old news paper added. However, the corrugated board could not be used because of the glutinous substance included. The produced tray cell pot absorbed water very easily and the bending force decreased rapidly. The waterproof material must be used to applicate the produced tray cell pot in plant growing fields.

세척 쑥갓의 선도 유지에 미치는 세척수 온도와 포장 형태의 영향 (Effects of Washing-water Temperature and Packaging Type on the Quality of Fresh-cut Crown Daisies)

  • 장민선;김병삼;김건희
    • 한국식품과학회지
    • /
    • 제40권2호
    • /
    • pp.171-177
    • /
    • 2008
  • 쑥갓을 1 및 5$^{\circ}C$의 냉각수와 10$^{\circ}C$의 지하수를 이용하여 세척한 후 PP film bag과 PETE tray에 포장하여 4 및 10$^{\circ}C$에서 9일간 저장하며 중량감모, 호흡율, 표면색, 비타민 C 함량, 미생물분석 및 관능적 품질변화를 조사하였다. 4$^{\circ}C$에서 저장한 경우 저장 3일째까지 1 및 5$^{\circ}C$의 냉각수로 세척한 쑥갓은 감모의 변화가 적었으며 호흡속도는 1 및 5$^{\circ}C$ 냉수 세척 처리하여 PETE tray로 포장하여 4$^{\circ}C$에서 저장한 경우 24.76 및 28.42 mg >$CO_2$/kg/hr로 서로 비슷한 값을 나타내었다. 표면색 변화에 있어서는 처리 구별 L, a, b값이 크게 변하지 않았으며 비타민 C는 4$^{\circ}C$의 저장 고에서 저장한 경우가 10$^{\circ}C$에서 저장한 경우보다 비타민 C 함량 이 높게 유지되었다. 4$^{\circ}C$에서 저장하고 1$^{\circ}C$ 냉각수로 세척한 후 PETE tray로 포장한 쑥갓의 총균수는 1.99 ${\times}$ 104 CFU/g, 대장균군수는 2.33 ${\times}$ $10_1 CFU/g로 무처리구 및 5-10$^{\circ}C$ 세척수로 세척한 경우에 비하여 1 log scale 정도 더 낮게 나타났으며 모든 처리구에서 E. coli는 검출되지 않았다. 관능적인 품질에 있어서도 1$^{\circ}C$냉수로 세척하고 PETE tray로 포장하여 4$^{\circ}C$에서 저장한 쑥갓의 신선도가 5 및 10$^{\circ}C$의 세척수로 세척하고 저장한 경우보다 효과 적인 것으로 나타났다.

Modeling for Drying of Thin Layer of Native Cassava Starch in Tray Dryer

  • Aviara, Ndubisi A.;Igbeka, Joseph C.
    • Journal of Biosystems Engineering
    • /
    • 제41권4호
    • /
    • pp.342-356
    • /
    • 2016
  • Purpose: The drying of a thin layer of native cassava starch in a tray dryer was modeled to establish an equation for predicting the drying behavior under given conditions. Methods: Drying tests were performed using samples of native cassava starch over a temperature range of $40-60^{\circ}C$. We investigated the variation in the drying time, dynamic equilibrium moisture content, drying rate period, critical moisture content, and effective diffusivity of the starch with temperature. The starch diffusion coefficient and drying activation energy were determined. A modification of the model developed by Hii et al. was devised and tested alongside fourteen other models. Results: For starch with an initial moisture content of 82% (db), the drying time and dynamic equilibrium moisture content decreased as the temperature increased. The constant drying rate phase preceded the falling rate phase between $40-55^{\circ}C$. Drying at $60^{\circ}C$ occurred only in the falling rate phase. The critical moisture content was observed in the $40-55^{\circ}C$ range and increased with the temperature. The effective diffusivity of the starch increased as the drying temperature increased from 40 to $60^{\circ}C$. The modified Hii et al. model produced randomized residual plots, the highest $R^2$, and the lowest standard error of estimates. Conclusions: Drying time decreased linearly with an increase in the temperature, while the decrease in the moisture content was linear between $40-55^{\circ}C$. The constant drying rate phase occurred without any period of induction over a temperature range of $40-55^{\circ}C$ prior to the falling rate period, while drying at $60^{\circ}C$ took place only in the falling rate phase. The effective diffusivity had an Arrhenius relationship with the temperature. The modified Hii et al. model proved to be optimum for predicting the drying behavior of the starch in the tray dryer.