• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.997-1003
• /
• 2005

Laser welding of dissimilar metals has been widely used to improve a wear resistance and a corrosion resistance of the industrial parts. The objective of this research works is to investigate the influence of the process parameters, such as the welding for SM45C and STS304 with CW Nd:YAG lasers. The bead-on-plate welding tests are carried out for several combinations of the experimental conditions. In order to quantitatively examine the characteristics of the dissimilar welding, the welding qualify of the cut section, stain-stress behavior and the hardness of the welded part are investigated. From the results of the investigation, it has been shown that the optimal welding condition without defects in the vicinity of the welded area and with a good welding quality is 1600W of the laser power, 0.85m/min of welding speed and 4m/min of pressure for shielding gas.

• Korean Journal of Poultry Science
• /
• v.46 no.4
• /
• pp.255-262
• /
• 2019

The micronutrients and flavor compounds of three new native chicken strains (A, C, and D) being developed in a breeding program (Golden Seed Project) were compared with a commercial native chicken strain (H) and the Baeksemi (W, white semi broiler). After 100 male chicks in each strains were reared for 5 weeks, the breast muscles from randomly selected 40 birds were analyzed at 8 replications. Native chicken strain A had greater amounts of α-tocopherol and α-tocotrienol compared with strain W. Native chicken strains showed higher contents of vitamin B₁₂ than Stain W. Stain H strain had the highest values of cholesterol content and strain D did the lowest. There was no different content of most minerals between native chickens (A, C, D, and H) and W, but Cu were more contained in native chicken strains compared with W. In terms of nucleotide-related flavor compounds, Stain A had the lowest content of hypoxanthine and strain D had highest inosine monophosphate. Native chicken strains had higher contents of umami-related free amino acids (glutamate and aspartate) than W. Among native chickens, strain A had more amounts in the contents of taurine, tasty flavor compounds, and certain vitamins, despite of the relatively low growth productivity. This result will provide information to select a strain with characteristic meat quality in a chicken breeding program.

• Fashion & Textile Research Journal
• /
• v.15 no.6
• /
• pp.985-992
• /
• 2013

Polytrimethylene terephthalate(PTT) offers several advantageous properties such as good tensile strength, uniformity, stiffness, toughness, UV stability, resilience, stain resistance, outstanding elastic recovery, and dyeability. The effects of annealing temperature on physical properties and the structure of PTT filaments and yarn were investigated by measuring wide-angle X-ray diffraction (WAXD), density, optical birefringence, dynamic visco elasticity, and tensile testing. The intensity of maximum tan ${\delta}$ decreased and the temperature of maximum tan ${\delta}$ shifted to a higher temperature as the annealing temperature of filaments increased; however, it shifted to a lower temperature when the annealing temperature exceeded $130^{\circ}C$. In addition, crystallinity, density and D-spacing of (010) crystal face increased as the annealing temperature increased. Optical birefringence and specific stress were almost constant up to $100^{\circ}C$ and then decreased above $130^{\circ}C$. The shrinkage of PTT filament is 0 in boiling water when annealed above $130^{\circ}C$; consequently, the use of annealed fiber above $130^{\circ}C$ can remove thermal instability when dyeing PTT fiber. In the case of yarns, the thermal stability and physical properties of yarns showed the best effect when the ply number is less than 5, twist number is less than 400tpm, and the annealing time is 20minutes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.6
• /
• pp.743-749
• /
• 2004

The gene encoding human serum albumin (HSA) was cloned from human liver cDNA library by PCR. The HSA cDNA in size of 2,176 bp, including 1,830 bp of open reading frame, was cloned into the plasmid carried with the 5'flanking sequence of goat $\beta$-casein gene (-4,044 to +2,025 bp) to get a tissue specific expression vector in mammary gland named pGB562/HSA (12.5 kb). A 9.6 kb DNA fragment in which the sequence is in order of goat $\beta$-casein gene regulatory sequence, HSA cDNA and SV40 polyadenylation signals was isolated from the pGB562/HSA by SacI and DraIII cutting, and used to microinject into the pronuclei of mouse fertilized eggs to produce transgenic mice. Three transgenic mice (2 female and 1 male) were identified by PCR and dot Southern blot analysis. The copy numbers of integrated transgene were more than 10 copies in line #21 and #26 as well as over 50 copies in line #31 of transgenic mice. HSA protein collected from the milk of lactating transgenic mice was confirmed by immuno-detection of Western and slot blot. The concentrations of HSA in the milk were from 0.05 to 0.4 mg/ml. An obvious antigen and antibody conjugate could be observed in immunohistochemical stain of mammary gland tissue from lactating day 11 of HSA transgenic mice. The transmission of transgene and its expression was recognized according to the results of RT-PCR and sequences analyses of their progeny.

• Journal of the Korean Society of Radiology
• /
• v.8 no.7
• /
• pp.389-395
• /
• 2014

The research was carried out to develop a animal model of malignant brain tumor for the researches in glioblastoma multiform (GBM) diagnosis and therapy. C6 cells were transplanted into the right striatum of SD rat using stereotactic instrument for the development. The developed animal model was verified by MRI and H&E stain assay of anatomicohistological examination. The MRI observations showed that the tumor developed at the injection site at the 7 days after glioblastoma inoculation. At 14 days post inoculation, the tumor grew to a large volume occupying almost a half of the right cerebral hemisphere. It was confirmed that the expression of excessive mitosis and pleomorphism in anatomicohistological examination. The developed animal model must be necessary and useful tool for the in vivo level research in the development of the new modality for the diagnosis and therapy of brain cancer.

• Korean Journal of Metals and Materials
• /
• v.50 no.7
• /
• pp.495-502
• /
• 2012

The aim of this study was to analyze high temperature deformation stability and properties of duplex stainless steels(DSS) according to annealing temperature. In order to analyze high temperature deformation stability, a number of compression tests were carried out with a stain rate of $10^{-2}s^{-1}{\sim}10s^{-1}$ up to a compression ratio of 50% in a temperature range of $950^{\circ}C-1300^{\circ}C$. The analysis of high temperature deformation stability of DSS was performed based on the Ziegler model. In order to analyze the high temperature properties of DSS, annealing treatments were conducted by isothermal holding for 1 hr at $950^{\circ}C$ to $1300^{\circ}C$ with $50^{\circ}C$ intervals followed by water cooling. The hardness and tensile tests were performed on specimens with different volume fractions of constituent phases, such as austenite, ferrite and sigma. The hardness and tensile strength of 2507 according to the annealing temperature are better than those of 2205. The strain rate sensitivity and Ziegler parameter are higher in 2205 than in 2507 as a whole, which implies that 2205 is better than 2507 in terms of forgeability at high temperature.

• The Journal of the Korean bone and joint tumor society
• /
• v.2 no.1
• /
• pp.18-26
• /
• 1996

We investigated the effect of deep-freezed, boiled and autoclaved autogenous long bone graft on the incorporation of the radial diaphyseal reconstruction in 30 rabbits by radiogram and histology for 8 weeks. Immediate histologic changes of 1cm of resected long bone treated by deep freezing, boiling and autoclaving in each 2 rabbits were also observed as control. Resected, boiled ($95^{\circ}C$ for 5 min.) and reimplanted bone was compared with resected, autoclaved ($131^{\circ}C$ for 5 min.) and reimplanted bone, and resected, deep freezed with liquid nitrogen for 5 minutes and thawing in saline and reimplanted bone in the reconstruction of bilateral radial defects in each of 8, and in total 24 adult rabbits. The results were as follows : 1. Immediate histologic changes showed that intracortical osteocytes in lacunae were partially necrotized and the cortex were faintly stained with they Masson trichrome stain in both boiled and deep freezed groups, while they completely necrotized and their cortex stained more weakly with Masson trichrome stain in autoclaved group which means less amount of collagen and protein in cortex of long bone. 2. Radiographies at 8 weeks showed complete union with more marked incorporation and external callus formation in all boiled and freezed groups, whereas there was delayed union in four of sixteen (25%) in autoclaved group. Histologically, at 8 weeks after boiled and freezed, more intense incorporation with new bone formation and neovascularization were observed, whereas transverse clefts consisted with delayed union in 4 cases of autoclaved group (25%) were observed at osteotomy site. Through these studies, the boilod and deeply freezed bones acted as an osteoinductive material as well as osteoconductive, but the autoclaved bone only as osteoconductive. Though boilod and deeply freezed bone showed higher osteogenic potentials than autoclaved bone, the necrotizing effect on cortical and boiled bone was inferior to that of autoclaved. Thus the deeply freezed bone can be used for the treatment of aggressive benign or less malignant bone tumor not involving cortical bone, but the autoclaved bone supplemented with bone graft for the treatment of malignant bone tumor involving cortex of long bone.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.75-75
• /
• 2018

Watermelons, Citrullus species(Cucurbitaceae), are native to Africa and have been cultivated since ancient times. T he fruit flesh of wild watermelon is watery, but typically hard-textured, pale-colored and bland or bitter. The familiar sweet dessert watermelons, C. lanatus, featuring non-bitter, tender, well colored flesh, have a narrow genetic base, suggesting that they are originated from a series of selection events in a single ancestral population. In this study, considered as sweet dissert watermelon, genetic resources, C. lanatus, comprising of traditional cultivars and local accessions were collected from 18 different countries in four continents. A total of 60 accessions were characterized morphologically according to RDA genebank descriptors combined with Japan and China, list for 11 qualitative characteristics, leaf length, leaf width, petiole length, petiole diameter-source, stalk end length, stalk diameter, fruit length, fruit diameter, rind thickness, flesh sugar content($^{\circ}brix$), fruit weight-sink, and 6 sink related characters, leaf margin incision-source, fruit shape, fruit skin ground color, fruit skin stain color, fruit skin stain pattern and flesh color-sink, were also investigated. Even though the relatedness between some morphological traits and fruit weight or fruit sweetness showed no significance, the accessions investigated have a great deal of variation for most of the morphological traits. Additionally, the accessions which showed good performance in flesh color and fruit shape (IT271048) and high sugar content of flesh (IT274119, IT290118) above 14brix, were investigated in this experiment. The accessions, which have the information on specific traits including the selected accessions could be introduced, distributed and investigated for further use.

• Journal of Biomedical Engineering Research
• /
• v.23 no.3
• /
• pp.235-241
• /
• 2002

The detection of tubercle bacilli (TB) from sputum smear is one of the fast and inexpensive methods for diagnosis of tuberculosis. For this method. sputum smears are usually flexed by heating and stained by acid-fast staining method, and then examined under an optical microscope. Two Procedures are commonly used fur TB staining. One is hot staining and the other is cold staining method. The Ziehl-Neelsen method which is a hot staining method is widely used in Korea because its stained color is more vivid However, the conventional automated stainer has to fix the sputum smear on a slide manually and the stain is not so vivid because it has not heating function. In an effort to save labor and minimize variations in manual staining Procedure. we developed an automated stainer with heating function. The entire staining process is fully automated. from fixation to final washing and drying. With the automated methods, five slides can be flexed and stained in 21 minutes at consistent high quality We compared the concordance rate between the two methods for 91 sputum samples to validate the stain quality of the developed automated stainer. As the results, the concordant rate between the two methods was 95% and there was no significant difference (p>0.05)

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.9
• /
• pp.1438-1443
• /
• 2001

The significance of the casting/forging process for reducing the production cost of large components is being noted in these days. This casting/forging process is a method of forging a workpiece preformed by casting into the final shape. In this study, the casting/forging process has been applied in manufacturing a large aluminum flange in order to reduce press capacity and material cost. Firstly, a hot compression test was performed with cast cylindrical billets in order to determine the optimum forging condition of the aluminum flange. The optimum range of forging temperature of Al 5083 was from 420$\^{C}$ to 450$\^{C}$. The suitable strain rate was 1.5 sec(sup)-1. The deformation amount of a preform of a preform in a forging process is a key role in the mechanical properties of casting/forging products. In order to find the change of mechanical properties according to effective stain of cast aluminum billets, a hot upsetting test were performed with rectangular blocks and then a uniaxial tensile test was performed with specimens cut from the upsetted billets. The tensile strength and the elongation of cast/upsetted aluminum billets were increased largely until the effective strain was 0.7. FE analysis was performed to determine the configurations of case preform and die for an aluminum flange. In the FE analysis, the forging load-limit was fixed 1500ton for low equipment cost. The cast preform was designed so that the effective stain around the neck of a flange exceeded 0.7. From the result of FE analysis, optimal configurations of the cast preform and the die were designed for a large flange. The filling and solidification analysis for a sound cast-preform was carried out with MAGMA soft. In the forging experiment for an aluminum flange, it was confirmed that the optimal configuration of the cast preform predicted by FE analysis was very useful. The cast/forged products using designed preform were made perfectly without any defects.