• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.280-283
• /
• 2003

To enhance the performance of superconducting motor, the flux which links the stator windings needs to be increased as much as possible. In this paper we redistributed the field winding to increase the flux-linkage. This paper introduces an algorithm that modifies the rotor winding shape to increase the flux-linkage to stator winding, satisfying both the constant superconductor volume and HTS tape characteristic (I$_{c}$-B curve) constraints. To check the validness of the proposed algorithm, it was applied to the 100 Hp HTS motor model, and about 21 % increase of flux-linkage was confirmed depending on the initial winding shape.e.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2067-2069
• /
• 2002

The study of the vector control of the induction machine without speed sensor is going on and there are the adaptive performance method to use the flux observer. This study is to make the vector control without the speed sensor based on the flux oriented reference vector control theory. This paper proposes the new speed follow-up method to deduce the current value in the current sensor and the 2 order flux observer based on the observer theory and examine the possibility to realize the flux oriented vector control system using the simulation in this proposed method of this study.

• Journal of the Korean Ceramic Society
• /
• v.31 no.9
• /
• pp.1030-1036
• /
• 1994

The ceramics in the system 0.5[Pb(Ni1/3Nb2/3)O3]-0.5[0.65PbTiO3-0.35PbZrO3] were prepared by conventional solid state reaction method, double calcined method (columbite precursor method) and flux method using NaCl-KCl. Amount of pyrochlore phase for the calcined powders, sintering charateristrics, dielectric and piezoelectric properties were then investigated. Sintering temperature was 1000~120$0^{\circ}C$ and in case of flux method, the amount of flux to oxide was 1 : 1 mole ratio. The dielectric and piezoelectric properties of ceramics prepared by double calcined method and flux method were found to be better than those by conventional method. It was also possible to lower sintering temperature and reduce the amount of pyrochlore phase either by double calcined method or flux method. But with increasing sintering temperature, the difference in characteristrics due to diffrent fabrication method gradually.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.E2
• /
• pp.43-52
• /
• 2004

A total of 10 boundary layer sampling events over the Pacific Ocean were analyzed for the purpose of defining the sea-to-air $CH_3$I flux using a mass balance photochemical model. These events were recorded on the National Center for Atmospheric Research (NCAR) C-130 aircraft as part of the Aerosol Charac-terization Experiment (ACE 1). The latitude range, covered by these events, was 2$^{\circ}$ N to 55$^{\circ}$ S. The flux ranges were 4 to 33 nmol m$^{-2}$ day$^{-1}$ , with an average value of 11$\pm$8 nmol m$^{-2}$ day$^{-1}$ . This study also indicated that the current approach to estimate the flux was not systematically different from the sea-air exchange model.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.3C no.6
• /
• pp.211-215
• /
• 2003

Alternating current (AC) losses of two Bi-2223 ([Bi, Pb] : Sr : Ca : Cu :O = 2:2:2:3) tapes [one untwisted (Tape I, twist-pitch of $\infty$ mm) and the other with a twist-pitch of 8mm (Tape II) ] were measured and compared. These samples, produced by the powder-in-tube (PIT) method, are multi-filamentary and have a Ag/Au and Ag matrix, respectively. Susceptibility measurements were conducted while cooling in a magnetic field. Flux loss measurements were conducted as a function of ramping rate, frequency and field direction. The AC flux loss increases as the twist-pitch of the tapes decreased, in agreement with the Norris Equation.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.81-82
• /
• 2012

A novel kind of switched reluctance motor (SRM) with short flux path is proposed in this paper. Phase excitation in the SRM gives short flux paths, hence reducing the magnetomotive force required to drive the machine, resulting in significant reduction of copper wire and core losses compared to the typical SRM with diametric circulation of magnetic flux. To verify the performance, the characteristics analysis of a double stator SRM, a 6/5 SRM with C-core structure and a 4/5 two-phase SRM which all composed of short flux path and a comparison with conventional SR motors are executed.

• Korean Journal of Food Science and Technology
• /
• v.32 no.2
• /
• pp.312-316
• /
• 2000

Crude xylooligosaccharides(XO) were separated with a cellulose membrane (10,000 molecular weight cut-off). Flux variation was measured at transmembrane pressures of 5, 10, 20 and 30 psi, while flow rates were maintained at 100, 200, 300 and 400 ml/min and temperatures at 10, 20, 23-25 and $30^{\circ}C$. Optimal conditions were found at the transmembrane pressure of 20 psi, the flow rate of 300 ml/min and the temperature of $23-25^{\circ}C$, where the flux was decreasing with time by 62% after 200 min. Total sugar, total solid and ash contents were rather independent of ultrafiltration but protein was removed up to 55% from crude XO. Especially, the use of ultrafiltration was very effective for decolorization (84%) of crude XO. These results suggest that ultrafiltration is a useful method for the primary purification of XO.

• 한국초전도학회:학술대회논문집
• /
• v.11
• /
• pp.67-67
• /
• 2001

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1315-1316
• /
• 2011

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.3
• /
• pp.131-135
• /
• 2004

This study was carried out for the analysis of temperature characteristics on soil surface using soil heat flux which is one of the important parameters forming soil temperature. Soil surface temperature was estimated by using the soil temperature measured at 10 cm soil depth and the soil heat flux measured by flux plate at 5 cm soil depth. There was time lag of two hours between soil temperature and soil heat flux. Temperature changes over time showed a positive correlation with soil heat flux. Soil surface temperature was estimated by the equation using variable separation method for soil surface temperature. Arithmetic mean using temperatures measured at soil surface and 10 cm depth, and soil temperature measured at 5 cm depth were compared for accuracy of the value. To validate the regression model through this comparison, F-validation was used. Usefulness of deductive regression model was admitted because intended F-value was smaller than 0.001 and the determination coefficient was 0.968. It can be concluded that the estimated surface soil temperatures obtained by variable separation method were almost equal to the measured surface soil temperature.