• Bulletin of the Korean Mathematical Society
• /
• v.37 no.4
• /
• pp.743-753
• /
• 2000

In the space $C_1(X)$ of real-valued continuous functions with $L_1-norm$, every bounded set has a relative Chebyshev center in a finite-dimensional subspace S. Moreover, the set function $F\rightarrowZ_S(F)$ corresponding to F the set of its relative Chebyshev centers, in continuous on the space B[$C_1(X)$(X)] of nonempty bounded subsets of $C_1(X)$ (X) with the Hausdorff metric. In particular, every bounded set has a relative Chebyshev center in the closed convex set S(F) of S and the set function $F\rightarrowZ_S(F)$(F) is continuous on B[$C_1(X)$ (X)] with a condition that the sets S(.) are equal.

• Transactions of Materials Processing
• /
• v.10 no.2
• /
• pp.123-129
• /
• 2001

This study is to investigate the effects of cold forming method with steel sheet of SCP3C to improve continuous productivity. Experiments were carried out in various working conditions, such as the number of stamping and the punch temperature. The effects of the punch temperature and the number of stamping on drawability of steel sheet of SCP3C as well as clearance and draw-in in the number of stamping were examined and discussed. More improvement of continuous productivity in case of cold stamping rather than by conventional stamping at room temperature is obtained. The optimum forming condition for drawing trunk floor panel of SCP3C is shown as the punch is cooled by coolant of $-5^{\circ}C$ and at the same time both the die and the blankholder are heated by stamping and frictional heat.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.863-877
• /
• 1996

A drying model to predict the drying process in continuous dryer was developed and proved by drying experiments. The experiment showed that the difference of moisture contents between the predicted and the observed was within 0.5%(wb). There was no cracked rice found even in high drying rate with the inlet moisture content over 23%(wb), and tempering treatment in the same temperature reduced the ratio of cracked rice. There was a little difference in the ratio of cracked rice between 40$^{\circ}C$ and 45$^{\circ}C$ drying temperatures with the final drying moisture content (14.5% wb), and the cracked rice increased at 55$^{\circ}C$. As a results, it was better to make fast drying on the rice over 23%(wb) inlet content it was recommended to keep drying at 45$^{\circ}C$.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.16 no.2
• /
• pp.159-163
• /
• 1991

For a continuous-time absorvation Markov chain, we apply and simplify the general method of finding the transition rates given the transition probabilities obtained from discrete observation of the continuous system. An example is given.

• Animal Bioscience
• /
• v.34 no.7
• /
• pp.1243-1252
• /
• 2021

Objective: An experiment was conducted to investigate the continuous and intermittent lighting program effects on terms of the productive performance, carcass traits, blood biochemical parameters, innate immune and oxidative status in broiler chicks. Methods: A total of 600 Cobb-500 one day old chicks were randomly allocated into six equal groups (100 chicks per treated group with five replicates of 20 chicks each) based on lighting program; 22 continuous lighting (22 C), 11 h lighting+1 darkness twice daily (11 L/1 D), 20 h continuous lighting (20 C), 5 h lighting+1 darkness four times daily (5 L/1 D), 18 h continuous lighting (18 C) and the final group subjected for 3 h lighting+1 h darkness six times daily (3 L/1 D). The experimental period lasted 42 days. Results: Compared with those under the intermittent light program, broiler chicks exposed to continuous lighting for 22 h had significant improvement in live body weight and carcass (dressing and breast percentage) measured traits. Though reducing lighting hours significantly reduced feed intake and feed conversion ratio values. Different lighting programs revealed no significant effect on all blood biochemical parameters. Oxidative stress and innate immunity parameters significantly enhance by reducing lighting hours (3L/1D). Conclusion: The findings suggest that reducing lighting hours up to 3L/1D would be more useful in enhancing feed efficiency, innate immunity, and oxidative status compared with continuous lighting programs on broilers.

• Microbiology and Biotechnology Letters
• /
• v.20 no.2
• /
• pp.196-202
• /
• 1992

Zoogloea ramigera 115 was selected for the production of viscous microbial polysaccharide for bioflocculants usage. Batch, fed-batch, and continuous culture processes were examined with regard to the high biopolymer production. Several carbon sources were tested, including glucose, lactose, molasses, and cheese whey. The C/N ratio of 90 was most effective for biopolymer production from glucose, while the C/N ratios of 30 for lactose and 60 for both molasses and cheese whey substrate gave a maximum production. Fed batch culture proved more effective to increase final biopolymer concentration than batch culture. Continuous fermentation with two stages modifying C/N ratio increased the productivity. The production rates were a maximum at dilution rate of 0.048 $hr^{-1}$ for molasses and at 0.096 $hr^{-1}$for cheese whey.

• Journal of the Korean Society for Heat Treatment
• /
• v.4 no.3
• /
• pp.39-46
• /
• 1991

The effects of austenitizing temperatures and times and cooling rate on the characteristics of continuous air cooling have been investigated for 0.3%C-Mn steels microalloyed with vanadium. Transformation start temperatures have been found to be measured from temperature-time curve directly obtained with continuous air cooling and to decrease with increasing austenitizing temperature, cooling rate and Mn contents. The coarsening behavior of austenite grain size has been measured to abnormally grow at $1050^{\circ}C$ and rapidly grow at $1200^{\circ}C$. It has been found that the volume fraction of pearlite was linealy proportional to the reciprocal square root of austenite grain size. The hardness has been measured to increase with increasing cooling rate up to $250^{\circ}C/min.$ and to remain relatively unchanged in the range of $250{\sim}400^{\circ}C/min.$ showing that hardness valves for steel with a higher Mn content increase more than those for steel with a lower Mn content. The impact property has been found to decrease with increasing of austenite grain size but does not linealy change with the reciprocal square root of austenite grain size.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.6
• /
• pp.1-6
• /
• 2010

Patterned optical components are widely used for optical products such as LCD and lighting. Since CCFL was used as a light source in the products, prism films having linear continuous optical patterns were widely used. However, LED which is a dot light source is popular recently, therefore, the optical products need new optical components having non-continuous optical patterns. Indentation machining method is a powerful method for machining of non-continuous pattern. When a copper mold and a brass mold were machined by this method, severe plastic deformation called pile-up was observed around the patterns. Since pile-up has negative relationship to ductility, this deformation can be eliminated by annealing treatment which makes the materials ductile. No plastic deformation occurred when machined after annealing at $600{^{\circ}C}$ and $575{^{\circ}C}$ for copper and brass, respectively. Finally, non-continuous optical patterns with high quality were machined on a copper mold and a brass mold successively.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.12
• /
• pp.1763-1773
• /
• 1998

In the present experimental study, the flow behavior in a semi-closed two-phase natural circulation loop was examined. Water was used as the working fluid. Heat flux, heater-inlet subcooling, and flow restrictions at the heater-inlet and at the expansion-tank-line were taken as the controlling parameters Six circulation modes were identified by changing heat flux and inlet subcooling conditions ; single-phase continuous circulation, periodic circulation (A), two-phase continuous circulation, and periodic circulations (B), (C), and (D). Among these, the single-phase and two-phase continuous-circulation modes exhibit no significant oscillations and are considered to be stable. Periodic circulation (A) is characterized by the large amplitude two-phase f10w oscillations with the temporal single-phase circulation between them, while periodic circulation (B) featured by the flow oscillations with continuous boiling inside the heater section. Periodic circulation (C) appears to be the manometric oscillation with continuous boiling. Periodic circulation (D) has the longer period than periodic circulation (B) and a substantial amount of liquid flow back and forth through the expansion-tank-line periodically ; this mode is considered the pressure drop oscillation. Parametric study shows that the increases of the inlet- and expansion-tank-line- restrictions and the decrease of inlet subcooling broaden the range of the stable two-phase(continuous circulation) mode.

• Kyungpook Mathematical Journal
• /
• v.46 no.2
• /
• pp.201-209
• /
• 2006

Suppose C is a nonempty closed convex subset of a real uniformly convex Banach space X. Let T : $C{\rightarrow}C$ be an asymptotically nonexpansive in the intermediate sense mapping. In this paper we introduced the three-step iterative sequence for such map with error members. Moreover, we prove that, if T is completely continuous then the our iterative sequence converges strongly to a fixed point of T.