• Journal of the Korean Applied Science and Technology
• /
• v.27 no.4
• /
• pp.531-538
• /
• 2010

The electrochemistry characterization of metal is important in many industrial applications. In this study, we investigated the C-V diagrams related to the electrochemistry characterization of nickel. We determined electrochemical measurement by using cyclic voltammetry with a three electrode system. A measuring range was reduced from initial potential to -1350mV, continuously oxidized to 1650mV and measured to the initial point. The scan rate were 100, 150, 200 and 200mV/s. As a result, the C-V characterization of nickel using ethanolamine and ethylethanolamine inhibitor appeared irreversible process caused by the oxidation current from the cyclic voltammogram. After adding ethanolamine compound additive, adsorption film constituted, and the passive phenomena happened. According to the results by cyclic voltammetry method, it was revealed that the effect of the electrochemistry characterization of nickel depends on ethanolamine structure interaction to adsorption complex.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.284-292
• /
• 2009

The stack-effect in high-rise buildings in winter causes many problems such as difficulties in opening or closing doors, infiltration, energy loss, noise and fire protection. Stack effect is influenced by temperature difference between the interior and exterior of building and the height of building. As an attenuation method for stack effect, the architectural methods are generally used. However, as though architectural methods were fully adopted, the problems are reported as ever in tall building. In this study, a new method to reduce stack effect will be suggested. As an active control method against the stack effect, E/V shaft natural cooling method is suggested. In this paper, the concept of E/V shaft natural cooling system and its reduction performance of stack effect by simulation and field measurement will be reported.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.6
• /
• pp.272-278
• /
• 2003

$Bi_4Ti_3O_{12}$ (BIT) and $(Bi_{3.25}La_{0.75})(Ti_{2.97}V_{0.03})O_{12}$ (BLTV) thin films were deposited on ITO/glass substrates by metal organic chemical vapor deposition (MOCVD) using ultrasonic spraying. After deposition of the films in oxygen atmosphere for 30 min, the films were heated by rapid thermal annealing (RTA) method, especially direct insertion, at various temperatures. The films were investigated on phase formation temperature, microstructure and electrical properties. From x-ray diffraction (XRD) patterns, the perovskite phase formation temperature of BLTV thin film was about $600^{\circ}C$ which was lower than that of BIT, $650^{\circ}C$. The leakage current of the BLTV thin film was measured to be $1.52\times 10^{-9}$A/$cm^2$ at an applied voltage of 1 V. The remanent polarization (Pr) and coercive field (Ec) values of the BLTV film deposited at $650^{\circ}C$ were $5.6\muC/cm^2$ and 96.5 kV/cm, respectively.

• International Journal of High-Rise Buildings
• /
• v.1 no.2
• /
• pp.99-105
• /
• 2012

The higher the building height and the larger the temperature difference between the outdoor and indoor space, the more remarkable is the draft driven by the stack effect in high-rise buildings. Moreover, the stack effect can bring about the deterioration of habitability and the degradation of the performance of the indoor control system in high-rise buildings. In this study, as a measure to attenuate the stack effect, the E/V shaft cooling method was proposed and its performance was compared with the conventional stack effect control method for strengthening the air-tightness of the building using a numerical simulation method. The total decreasing ratios on the stack effect in a building were compared, and the probabilities of the secondary problems were analyzed. The results show that the E/V shaft cooling is very effective to decrease the stack effect in a high-rise building in terms of the reduction performance and application. Moreover, this method does not cause secondary problems, such as stack pressure transition to other walls, unlike the conventional stack effect mitigation method.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.4
• /
• pp.182-187
• /
• 2007

The use of the pulsed electro acoustic (PEA) method allowed us to perform the direct observations of spatio-temporal charge distributions in Electric double layer capacitors (EDLCs) based on polarizable nanoporous carbonaceous electrode. The negative charge density became the maximum, about $205C/m^3$ at the region where was near to collector layer in EDLCs for case $V_{DC}=2.5V$, while the positively charged density became the maximum, about $61.1C/m^3$ at the region where it was located around the cathode layer. The performance of the best sample was found to be better in terms of the charge density (Cs) and specific energy ($E_s$) with a maximum value of ${\sim}8.4F/g$ and 26 Wh/kg. The $C_s$ obtained from the PEA method agreed well with that from the energy conversion method. The PEA measurement used here is a very useful method to quantitively investigates the spatio-temporal charge distribution in EDLCs.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.21 no.2
• /
• pp.34-49
• /
• 1993

This research aimed to analize the cognitive intensity of valuation(C.I.V) on urban environment as a first stage of the works on evaluative urban image under the hypothesis that it could be interpreted with a correlation analysis between the C.I.V and attitude(Satisfaction of unsatisfaction Intensity) toward urban environment. As a method of a study, 118 cognitive elements were selected representing an urban environment, and each of elements was suggested to citizens of Kyungju with 7 point Likert Scale. The analysis of C.I.V was operated under the three criteria: The first, three of urban space scale(urban scale, neighborhood scale, and housing scale), the second, four elements of urban living environment(safety, amenity, healthfulness, and effectiveness), and the last, thirteen urban unit environment(housing, traffic, education, tourism, medical/health, culture, etc.). The results were as follows: C.I.V to each of 118 elements was cleary defined, showing the possibilities of being applied to a method for subjective, or cognitive evaluation on urban environment: It was revealed that citizens'C.I.V was rather higher in non-physical, qualitative elements than in physical and quantitative ones. This shows well the limitation of the objective method of evaluation of urban environment: The results of the others' studies on the image of Kyungju based on the cognitive approach, being focused on the analysis of the visual aspects of urban structure, cultural assets, historic site and tourism, were almost same as this study but it was quite different for this research to reveal well the citizens' cognition on their living environment of traffic, education, medical, etc..

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.4
• /
• pp.65-70
• /
• 2023

In the paper, we propose a design method and process of a hybrid V2X communication module that combines WAVE communication, LTE-V2X communication, and legacy LTE communication in evaluating vehicle V2X electromagnetic compatibility. C-ITS is suitable for safety service applications due to its low latency, and legacy LTE is suitable for applications such as traffic information and infotainment due to its high latency and high capacity. In order to evaluate the V2X communication system, the evaluation equipment must have communication performance of the same level or higher. The main design contents presented in this paper will be applied to the implementation of a hybrid V2X communication module for electromagnetic compatibility evaluation.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.11
• /
• pp.1751-1757
• /
• 2007

Elastin-like polypeptides (ELPs) undergo a reversible inverse phase transition upon a change in temperature. This thermally triggered phase transition allows for a simple and rapid means of purifying a fusion protein. Recovery of ELPs-tagged fusion protein was easily achieved by aggregation, triggered either by raising temperature or by adding salt. In this study, levansucrase has been used as a model enzyme in the development of a simple one-step purification method using ELPs. The levansucrase gene cloned from Pseudomonas aurantiaca S-4380 was tagged with various sizes of ELPs to functionally express and optimize the purification of levansucrase. One of two ELPs, ELP[V-20] or ELP[V-40], was fused at the C-terminus of the levansucrase gene. A levansucrase-ELP fusion protein was expressed in Escherichia coli $DH5{\alpha}$ at $37^{\circ}C$ for 18 h. The molecular masses of levansucrase-ELP[V-20] and levansucrase-ELP[V-40] were determined as 56 kDa and 65 kDa, respectively. The phase transition of levansucrase-ELP[V-20] occurred at $20^{\circ}C$ in 50 mM Tris-Cl (pH 8) buffer with 3 M NaCl added, whereas the phase transition temperature ($T_t$) of levansucrase-ELP[V-40] was $17^{\circ}C$ with 2 M NaCl. Levansucrase was successfully purified using the phase transition characteristics of ELPs, with a recovery yield of higher than 80%, as verified by SDS-PAGE. The specific activity was measured spectrophotometrically to be 173 U/mg and 171 U/mg for levansucrase-ELP[V-20] and levansucrase-ELP[V-40], respectively, implying that the ELP-tagging system provides an efficient one-step separation method for protein purification.

• Journal of the Korean Ceramic Society
• /
• v.40 no.3
• /
• pp.213-218
• /
• 2003

Band gap energies of SrTiO$_3$(STO) thin film on glass substrates were studied in terms of annealing temperature. The STO thin film was fabricated by our newly developed method based on the combination of the Self-Assembled Monolayer(SAM) technique and the Liquid Phase Deposition(LPD) method. The as-deposited film demonstrated a direct band gap energy of about 3.65 eV, which further increased to 3.73 eV and 3.78 eV by annealing at 40$0^{\circ}C$ and 50$0^{\circ}C$, respectively. The band gap energy saturated at about 3.70 eV for the crystallized film which was obtained by annealing at 600-$700^{\circ}C$. The relatively large band gap energies of our crystallized films were due to the presence of minor amorphous phase, grain boundaries and oxygen vacancies generated by annealing in air.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.7 no.2
• /
• pp.59-65
• /
• 1982

In this paper, the CdS single crystal, which was grown as piper-polish method, was Ion-bombarded with Sb and In, and the thermally stimulated current of the spot that was Ionbombarded was measured. In the sample which was individually bombarded by Sb and In, the over-lapping peak was found, this over lapping peak was separated, by the method of thermal cleaning, showing the trap levels of 0.25(eV) and 0.31(eV) at the temperature of 147(K) and 181(K). While the spot is being cooled down and excited with photolight at the same time, the trap level 0.25(eV) disappeared and the new trap level of 0.85(eV) appeared. It can be said that the better photo-conductive crystals, the T.S.C is better measured.