• Korean Journal of Food Science and Technology
• /
• v.11 no.4
• /
• pp.242-248
• /
• 1979

To detect proper lytic assay conditions of the crude zumolyase from Arthrobacter luteus, effets of the various factors involved in the lytic system of Sacchromyces sake cultured with shaking in the malt extracts medium were investigated. The results are summarized as follows : 1. The susceptibilities of viable cells of S. sake from logarithmic growth phase to the lytic enzmye were much greater than those of the cells in lag and stationary phases. The cells cultured for 18 hr were the most susceptible to the enzyme. 2. Lytic activity of the enzyme toward the viable cells of S. sake was very low. It was, however, enhanced 4 folds of more by the pretreatment of the cells with 0.05 M sodium sulfite. 3. Lytic activity of the enzyme toward commercial baker's yeast cells was negligible, and the effect of sodium sulfite on the lysis of the cells also was nothing but a little. 4. The lyophilized cells of the baker's yeast showed more susceptibility to the lytic enzyme than viable cells of the yeast. No definite effect of sodium sulfite on the lysis of the lyophilized cells, however, was observed either baker's yeast of S. sake. 5. It appeared that the relationship between the reaction rate and the enzyme concentration on the lysis of the yeast cell walls followed enzyme kinetic theory, but one between the reaction rate and concentration of the yeast cells as substrates showed different pattern from that in enzyme kinetic theory. 6. After the preparation of crude zymolyase was kept at $7^[\circ}C$ for 10 days in the 0.05 M phosphate buffer, pH 7.5, the remainning lytic activity was about 80 %.

• Korean Journal of Poultry Science
• /
• v.33 no.4
• /
• pp.255-262
• /
• 2006

Two experiments were conducted to investigate the effect of dietary organic selenium levels on performance and selenium retention in broiler chickens and laying hens. In experiment 1, the effects of dietary organic selenium levels on the weight gain, feed intake, feed conversion, and selenium retention of meat and liver in broiler chickens were investigated. For each growth phase, the basal diet was supplemented with 0 (control), 0.60, 1.20, 1.80 and 2.40 ppm Se from selenium yeast(SY). Weight gain, feed intake, and feed conversion were not affected by the selenium addition in diets. Breast muscle Se levels were linearly increased (P<0.05) as dietary Se level increased by SY. Selenium concentration of liver tissue was increased (P<0.05) in supplemental SY compared to the control, and was increased (P<0.05) in supplemental 1.20, 1.80 and 2.40 ppm SY compared to the 0.60 ppm SY. In Experiment 2, 12-week-experiment using Hy-Line laying hens (68 wk of age) was conducted to examine the effects of dietary organic selenium on egg Production, egg weight, daily egg mass, feed intake, feed conversion, egg quality, and selenium concentration of eggs. A corn-soybean meal basal diet was supplemented with 0 (control), 0.30, 0.60, 0.90 and 1.20 ppm Se from selenium yeast (SY). Egg Production was significantly improved(P<0.05) in supplemental 0.30 and 0.90 ppm SY compared to the control and 0.60 ppm SY during week 1 to 12, but daily egg mass, feed intake, and feed conversion showed no difference in supplemental SY and control. Haugh unit, yolk color and eggshell breaking strength showed no difference in supplemental SY and control. Eggshell thickess was significantly (P<0.05) higher in supplemental 0.60 and 1.20 ppm SY compared to the 0.90 ppm SY in week 9. Egg Se levels were linearly increased (P<0.05) as dietary Se level increased by SY.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.4
• /
• pp.419-430
• /
• 2005

We have carried out a statistical analysis on solar wind dynamic pressure pulses during geomagnetic storms. The Dst index was used to identify 111 geomagnetic storms that occurred in the time interval from 1997 through 2001. We have selected only the events having the minimum Dst value less than -50 nT. In order to identify the pressure impact precisely, we have used the horizontal component data of the magnetic field H (northward) at low latitudes as well as the solar wind pressure data themselves. Our analysis leads to the following results: (1) The enhancement of H due to a pressure pulse tends to be proportional to the magnitude of minimum Dst value; (2) The occurrence frequency of pressure pulses also increases with storm intensity. (3) For about $30\%$ of our storms, the occurrence frequency of pressure pulses is greater than $0.4\#/hr$, implying that to. those storms the pressure pulses occur more frequently than do periodic substorms with an average substorm duration of 2.5 hrs. In order to understand the origin of these pressure pulses, we have first examined responsible storm drivers. It turns out that $65\%$ of the studied storms we driven by coronal mass ejections (CMEs) while others are associated with corotating interaction regions $(6.3\%)$ or Type II bursts $(7.2\%)$. Out of the storms that are driven by CMEs, over $70\%$ show that the main phase interval overlaps with the sheath, namely, the region between CME body and the shock, and with the leading region of a CME. This suggests that the origin of the frequent pressure pulses is often due to density fluctuations in the sheath region and the leading edge of the CME body.

• Journal of Plant Biology
• /
• v.2 no.1
• /
• pp.14-21
• /
• 1959

The bamboo, one of staples of South-East Asia, has 1, 250 species in 46 Genus throughout the world South-East Asia, it's main habitat, has 1, 180 species, while South America has about 70 species or so. Major places of it's production in Asia are Korea, southern China, Japan, Malay, Ceylon, Formosa, and Philipine, but of these, Korea, southern China, and Japan are the most famous places for their production of excellant bamboo. In Korea, Kyongsang-Namdo and Cholla-Namdo are known as it's home, occupying 80 per cent of the total area of bamboo production in this country. Kyongsang-Pukdo, Cholla-Pukdo, Chungehong-Namdo, and Kangwon-do are also known as it's minor production. The importance of the bamboo can not be ignored, considering it's role in the industrial development of this country; the bamboo-ware is indispensable for the culture of laver which annually secures a considerable amount of foreign money. But it has long been regreted that the home-made bamboo-ware is far from being able to meet the ever increasing demand in quantity and is forced to be imported annually. In the light of the above mentioned fact, much interested; I undertook the task of investigating the bamboo in this country, Primarily concerned in it's kind and distribution, and could draw the following conclusions as the first phase of my investigation: (1). The amount of the bamboo accumulation in this country, compared with that of pre-worldwar II, is reduced as much as 300, 000 fagots(on fagot amounts to 25 pieces), and now the acreage of the bamboo field is 32, 200$\textrm{km}^2$s. (2). At a mountian peak in Kunoe-myon Wando-kun Cholla-Namdo, I found out a new specis. (Shasamorpha chiisanensis NAKAI Forma wan-Ponia H. P. CHONG) (3). The kinds of the autogenous wild bamboo in this country are as follows; a). 8 kinds in Sinoarundinaria. (5 Spp; 2 For; 1 Var) b). 1 kinds in Pieioplastus. (1 Spp) c). 2 kinds in Pseudosasa. (1 Spp; 1Var.) d) 4 kinds in Sasamorpha. (2 Spp; 1 For.; 1 Var.) e). 4 kinds in Sasa. (4 Spp) In total there are nineteen(19) kinds of autogenous wild bamboo in this country. When adding to this thethirty five (35) species which the japanese has transplanted in Kyongsang-Namdo Forestry Expreimental stations, there are in all fifty four (54) spe ies in this country. (4). As for the distribution of the Northern limitation of the bamboo growing, I found that Sinoarundinaria nigra OHWI var, Henonis HONDA can be cultivated as for as Kosongkun, Kangwon-Do, andSinoarundinaria pubescens HONDA as for as Clung Chong Namdo, and Sinoarundinaria reticulata as far as chung Chong-Pukdo.

• Membrane and Water Treatment
• /
• v.9 no.1
• /
• pp.43-51
• /
• 2018

Hollow fiber (HF) membranes are gaining wide interest over flat membranes due to their compaction and high area to surface volume ratio. This work addresses the fabrication of HF from polysulfone (PS) and polyethersulfone (PES) using N-methylpyrrolidone (NMP) as solvent in addition to other additives to achieve desired characteristics. The semi-pilot spinning system includes jacketed vessel, four spinneret block, coagulation and washing baths in addition to dryer and winder. Different parameters affecting dry-wet spinning phase inversion process were investigated. Dope compositions of PES, NMP and polyvinyl pyrrolidone (PVP) of varying molecular weights as additive were addressed. Some critical parameters of importance were also investigated. Those include dope flow rate, air gap, coagulation & washing baths and drying temperatures. The measured dope viscosity was in the range from 1.7 to 36.5 Pa.s. Air gap distance was adjusted from 20 to 45 cm and coagulation bath temperature from 20 to $46^{\circ}C$. The HF membranes were characterized by scanning electron microscope (SEM), atomic force microscope (AFM) and mechanical properties. Results indicated prevalence of finger like structure and average surface roughness from about 29 to 78.3 nm. Profile of stress strain characteristics revealed suitability of the fibers for downstream interventions for fabrication of thin film composite membrane. Different empirical correlations were formulated which enable deeper understanding of the interaction of the above mentioned variables. Data of pure water permeability (PWP) confirmed that the fabricated samples fall within the microfiltration (MF)-ultrafiltration (UF) range of membrane separation.

• Microbiology and Biotechnology Letters
• /
• v.17 no.2
• /
• pp.88-93
• /
• 1989

To improve a new yeast strain capable of converting xylan to ethanol directly, we tried protoplast fusion between xylose fermenting yeast (Candida sp. X-6-41) and xylan assimilating yeast (Crypto-coccus sp. XB-33), finally selected the most promising two fusants (XFU-1 and XFU-2). As the optimum conditions for protoplast formation, the yeast cells were cultured to exponential phase in YPD and YPX containing 0.6M KCI, respectively, and then treated with zymolyase (0.25mg/$m\ell$), cellulase(4mg/$m\ell$) and 100mM 2-mercaptoethanol at pH 8 and 3$0^{\circ}C$. The protoplasts of parental auxotrophs were fused in the presence of 20mM CaCl$_2$and 40% polyethylene glycol(M.W.4000). The physiological and morphological characteristics of the fusants, such as assimilation of carbon sources, cell size, growth rate, xylanase activity and xylan fermentation ability were investigated. Xylanase activity of fusants that cultured in chemically minimal medium was higher than that of fusants that cultured in completed medium, because xylanase producing activity of xylose fermenting yeast(X-6-41) was inhibited by isoleucine.

• Journal of the Korean Magnetics Society
• /
• v.12 no.2
• /
• pp.57-63
• /
• 2002

In order to increase the magnetic properties of a Nd-Fe-B sintered magnet, the general factors including particle size and its distribution, volume fraction of Nd$_2$Fe$_{14}$B phase, degree of alignment of Nd$_2$Fe$_{14}$B grain, oxygen content and grain size etc. should be optimized by controlling the composition of Nd-Fe-B alloy as well as the manufacturing process. In this study, fabrication of the Nd-Fe-B sintered magnet was carried out in a laboratory scale by controlling the composition of Nd-Fe-B alloy and the manufacturing process. The optimum milling condition was found by investigating the milling media, milling time and ball size. The addition of FeGa was effective to increase the coercivity of the Nd-Fe-B sintered magnet. A remanence of 14.4 kG, a coercivity of 9.4 kOe and a maximum energy product of 47 MGOe were obtained from the sintered magnet.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.2
• /
• pp.41-51
• /
• 2017

Microbial processes that bind heavy metals and form minerals are widespread, and they represent a basic aspect of biogeochemistry. Some microorganisms can crystallize minerals by secreting a specific enzyme. In particular, calcite ($CaCO_3$) precipitation is an important part of biomineralization, and has been studied extensively because of its wide application in civil engineering technology. This process provides an effective way to stabilize heavy metals within a relatively stable crystal phase. In this study, biomineralization of calcite by three urea-hydrolyzing indigenous bacterial strains was investigated by microbiological analyses. Three bacterial strains were isolated from the sludge of B mine in Mexico and each bacterial strain was identified by the cellular fatty acid composition and 16S rRNA partial sequencing analysis. The results of the identification analysis showed that these strains were closest to Sporosarcina pasteurii, Kurthia gibsonii, and Paenibacillus polymyxa. We found that the optimum conditions for growth of these indigenous bacteria were $30-40^{\circ}C$ and pH range of 7-8. Microbiological analyses showed the possibility that the bioaccumulated heavy metals ions were deposited around the cell as crystalline carbonate minerals under the optimum conditions. The findings of our study suggest that the indigenous bacterial strains play an important role in heavy metal immobilization.

• Korean Journal of Pharmacognosy
• /
• v.43 no.2
• /
• pp.137-146
• /
• 2012

Dipsaci Radix (Dipsacaceae) has been used as a tonic, an analgesic, anti-inflammatory and anti-complement agents in traditional herbal medicine for the therapy of low back pain, knee pain, rheumatic arthritis, traumatic hematoma, and bone fractures. A high-performance liquid chromatography-electrospray ionization-mass spectrometric method (HPLC-ESI-MS) was developed for the simultaneous quantitation method of the five compounds from the herbal drug: asperosaponin VI and asperosaponin XII (terpene glycosides), sweroside, loganin and dipsacus A(iridoid glycosides). HPLC separation of the analytes was achieved on a C18 column ($150{\times}2.0$ mm i.d., 5 ${\mu}m$) using the aqueous methanol containing 5 mM ammonium acetate with gradient flow of the mobile phase. Detection of the analytes was performed by positive ion electrospray ionization, and selected ion monitoring was used for data acquisition using m/z corresponding molecular adduct ion, $[M+NH_4]^+$ and $[M+H]^+$. Calibration graphs showed good linearity ($r^2$=0.9997) over the wide range of the analytes; intra- and inter-day precisions (RSD, %) were within 9.1% and the accuracy between 94.0-111.0%. Recoveries of the analytes through the assay procedure were in the range of 93.7-110.8%. Analytical results of the herbal drugs of Dipsaci Radix (17 samples) show wide distribution of the five marker compounds and clear difference of the species from Phlomidis Radix (4 samples). The developed method would provide a practical guide for the quality control of the herbal drug.

• Journal of the Korean Ceramic Society
• /
• v.39 no.12
• /
• pp.1133-1137
• /
• 2002

The cement for solidification of the toxic waste was fabricated using a mixture of the waste concrete powder and blast furnace slag in the ratio of 1:1 and its hydrate morphology and compressive strength of the sample were evaluated in order to apply to the solidification of the COREX sludge. The X-ray diffraction analysis of the sample which prepared by the addition of 10% Portland cement and hemihydrate showed the presence of $Ca(OH)_2$, ettringite, gel-phase and C-S-H hydrate. Compressive strength of the sample exhibited enough high to use as a solidification cement. The strength of the sample was over 140 kgf/$m^2$ in 7 days in case of solidification of the COREX sludge and the sample possess sufficient morphology for the solidification and stabilization of the waste sludge.