• Journal of Environmental Science International
• /
• v.15 no.8
• /
• pp.727-735
• /
• 2006

In this study, the PHYTO-PAM-fluorometric method was used to evaluate the ETR$_{max}$ in terms of sensitivity to DIN/DIP against 14 microalgae: Prorocentrum micans, Heterocapsa triquetra, Gymnodinium impudicum, Cymnodinium catenatum, Amphidinium caterae, Chlorella vulgaris, Chroococcus minutus, Microcystis aeruginosa, Chlorella ellipsoidea, Nannochloris oculata, Oocystis lacustris, Chroomonas salina, Gloeocystis gigas, and Prymnessium parvum. We found that P. micans, H. triquetra, and A. caterae exposed to the maximum level of DIN/DIP were significantly smaller in the ETR$_{max}$ than that of the minimum and moderate mixture. Unlikely the ETR$_{max}$, the initial slope alpha was not significantly different at the level of 60 DIN/DIP. In G. catenatum, the moderate levels of 15 and 20 in DIN/DIP were found to be significantly different from the ETR$_{max}$ at Chl-Ch4. Gymnodinium impudicum had a higher value than that of the ETR$_{max}$ than that of dinoflagellates used in this study, ranging from 306.1 (Ch4, DIN/DIP: 10) to 520.1 (Ch4, DIN/DIP: 30). The ETR$_{max}$ value obtained from other microalgae was similar to C. impudicum at any of the ratios of DIN/DIP and channels. Consequently, the influence of offshore water current assures us of the suppression of photosynthesis and electron transport rate in dinoflagellates. Gymnodinium impudicum has not been researched in the area of red tides in Korea, but it will be enough to creat the massive algal blooms in the future because of higher potential photochemical availability.

• Journal of Korea Foresty Energy
• /
• v.23 no.1
• /
• pp.38-44
• /
• 2004

The application of the dispersant is indispensable to the manufacture of Korean traditional paper (Hanji). However the mucilage of which extracted from Abelmoschus manihot root has viscosity drop problem in summertime and synthetic dispersant such as polyacrylamide (PAM) and polyethyleneoxide (PEO) have some problems that under the influence of the quality of. water, cohesion, and bad solubility. This study was carried out not only to develop new natural dispersant that can solve such problems but also to investigate the viscosity and papermaking characteristics of Hydrangea paniculata mucilage. There were no viscosity changes between control and treated mucilage that adjusted to pH 9, heated 6 hours at 40 $^{\circ}C$, and stored heating treatment one for a week at 5 $^{\circ}C$. The treatment of mucilage that adjusted to pH 9 and aged for 120 hours at 4$0^{\circ}C$ resulted in viscosity drop. In the hydrolysis of mucilage, galacturonic acid and glucuronic acid contents were decreased by heating and pH adjusting treatments. Wet web stripping quality and physical properties of Korean traditional paper, which used Hydrangea paniculatamucilage were same or superior to the Abelmoschus manihot root.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.572-575
• /
• 2005

A novel pneumatic artificial muscle actuator (PAM actuator), which has achieved increased popularity to provide the advantages such as high strength and high power/weight ratio, low cost, compactness, ease of maintenance, cleanliness, readily available and cheap power source, inherent safety and mobility assistance to humans performing tasks, has been regarded during the recent decades as an interesting alternative to hydraulic and electric actuators. In order to realize satisfactory control performance, a variable damper Magneto Rheological Brake (MRB), Is equipped to the Joint of the manipulator. Superb mixture of conventional PID controller and a phase plane switching control method brings us a novel controller. This proposed controller is appropriate for a kind of plants with nonlinearity, uncertainties and disturbances. The experiments were carried out in practical PAM manipulator and the effectiveness of the proposed control algorithm was demonstrated through experiments, which had proved that the stability of the manipulator can be improved greatly in a high gain control by using MRB with phase plane switching control method and without regard for the changes of external inertia loads.

• Resources Recycling
• /
• v.10 no.2
• /
• pp.13-19
• /
• 2001

Several hydrolyzed extruded PAN's were prepared through reaction of extruded PAN (7.5% methyl acrylate) with NaOH in methanol at various temperatures and times. These were amidoximated with hydroxylamine in MeOH and/or $H_2$O to introduce an excellent adsorption capacity of heavy metal ions. Amidoximated hydrolyzed extruded fAN showed superior swellability to non-hydrolyzed extruded PAM. The amidoximated extruded PAN hydrolyzed for 6h at $60^{\circ}C$ showed the best dimensional stability. Amidoximated hydrolyzed extruded PAN has more adsorption capacity of $Cu^{2+}$ than that of $Ni^{ 2+}$ These PAN derivates also showed an excellent selectivity for adsorption of metal ions.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.3
• /
• pp.35-42
• /
• 2011

In this study, ground calcium carbonate (GCC) was modified by Layer-by-Layer (LbL) multilayering with polyelectrolytes. Cationic polyacrylamide (C-PAM) and poly sodium 4-styrene sulfonate (PSS) were used as cationic and anionic polyelectrolytes to modify GCC. The characteristics of the modified GCC were examined in terms of zeta potential and particle size with the addition level of polyelectrolyte and layer number. The GCC could form an assembly of cationic and anionic polyelectrolytes through consecutive adsorption process. The zeta potential of the modified GCC moved toward the cationicity and reached the plateau with the increase of the addition level of C-PAM. With layering of anionic PSS, the GCC had the negative charge. The particle size was dependent on the zeta potential. It was also observed by optical microscope. As the PSS was in the presence of the outermost layer, the GCC showed the better dispersability. It indicated that the surface charge and particle size can be controlled by adjusting the addition level of polyelectrolyte and the layer number.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05d
• /
• pp.21-24
• /
• 2003

휴대이동전화의 고성능화, 소형화에 따라서 전자부품들은 고집적화가 요구되고 있다. 이에 따라서 많은 수의 수동부품을 회로 기판 내에 내장화하기 위한 LTCC(Low Temperature Cofired Ceramic: 저온동시소성)기술이 적용된 부품의 출현이 계속되고 있다. 본 연구에서는 이러한 저온동시소성 기술을 활용하여 제품을 개발하기 위해서 고주파수 대역의 소자의 특성을 측정 하였다. 측정된 소자의 특성을 적용하기 위해서 소자 쿠폰을 제작하으며 고주파 회로 분석과 시뮬레이션 결과를 통해서 수동소자가 내장된 PAM( 전력증폭기), FBAR용 모듈 기판을 제작하였다.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.37-40
• /
• 1999

DSP를 이용한 Brushless DC (BLDC) 모터의 초고속 센서리스 제어 기법 및 그 결과가 제시된다. 초고속 BLDC 모터의 센서리스 제어를 위해서 주 제어기로 DSP TMS320C240이 사용되며 제어 기법으로는 Pulse Amplitude Modulation(PAM) 기법이 사용된다. RAM 제어 기법을 사용함으로서 인버터는 six-step 방식으로 구동되며 속도 제어는 인버터 DC 링크 앞 단 쵸퍼의 전압 제어에 의해 이루어진다. 회전자 위치는 역기전력 센싱 방식에 의해 추정되며 TMS320C240의 Event Manager Module에 입력되어 Commutation 위치 및 속도가 계산된다. 계산된 속도는 디지털 PI 제어 알고리즘에 의해 처리되며 제어기의 출력은 쵸퍼의 duty 비를 변화시킨다. 개발된 DSP 제어 보드 및 제어 알고리즘의 성능을 시험하기 위해 실험이 수행되었으며 전체 제어 알고리즘은 DSP TMS320C240의 어셈블리 프로그램에 의해 구현된다. 결과로 최고 속도 50000 [rpm]에서 이상적인 응답 특성을 얻을 수 있었다.

• Korean Journal of Environmental Biology
• /
• v.34 no.1
• /
• pp.18-29
• /
• 2016

The effects of water temperature, salinity, water column nutrient contents, and phytoplankton primary productivity on pigment composition and concentration, as well as primary productivity of Pyropia yezoensis Ueda purple lavers were studied at the primary cultivation areas in the Manho (Jindo-Haenam) region on the southwestern coast of Korea in March 2014. The water temperature was $9.1{\sim}9.6^{\circ}C$, salinity was 32.5~33.1, and transparency was 0.7~1.5 m. The shallow euphotic depth resulted from the high turbidity. Water column dissolved inorganic nitrogen (DIN), dissolved inorganic phosphorus (DIP), and silicate concentrations were $3.59{\sim}5.73{\mu}M$, $0.16{\sim}0.41{\mu}M$, and $12.41{\sim}13.94{\mu}M$, respectively. Chlorophyll a (Chl a) concentration was $0.51{\sim}1.25{\mu}g\;L^{-1}$. Nanoplankton ($0.7{\sim}20{\mu}m$ size class) accounted for 58% of the total Chl a concentration. Fucoxanthin was the dominant photosynthetic pigment at all sites. Microplankton ($20{\sim}200{\mu}m$ size class) accounted for 64% of the total fucoxanthin concentration. The primary productivity of phytoplankton was $57.72{\pm}4.67(51.05{\sim}66.71)mg\;C\;m^{-2}d^{-1}$. The nanoplankton ($0.7{\sim}20{\mu}m$ size class) accounted for 77% of the total phytoplankton primary productivity. The calculated phytoplankton primary productivity was $11,337kg\;C\;d^{-1}$. The primary productivity of Pyropia blades was $1,926{\pm}192(1,102{\sim}2,597)mg\;C\:m^{-2}d^{-1}$, i.e., calculated as $39,295kg\;C\;d^{-1}$. The total primary productivity of phytoplankton and Pyropia blades was $50,632kg\;C\;d^{-1}$. The primary productivity of Pyropia blades was 3.5 times greater than that of phytoplankton in the Manho region on the southwestern coast of Korea.

• Translational and Clinical Pharmacology
• /
• v.25 no.1
• /
• pp.15-20
• /
• 2017

This study was performed to evaluate the use of vibrating microneedles for the transdermal delivery of vitamin C. The microneedles were designed to vibrate at three levels of intensity. In vitro permeation by vitamin C was evaluated according to the specific conditions such as vibration intensity (levels 1, 2 and 3), application time (1, 3, 5, 7 and 10 min), and application power (500, 700 and 1,000 g). The highest permeation of vitamin C was observed at level 3 of vibration intensity, 5 min of application, and 1,000 g of application power. Vitamin C gel showed no cytotoxic effect against Pam212 cells or skin irritation effects. A pharmacokinetic study of the gel in rats was conducted under optimized conditions. The $AUC_{0-{\infty}}$ and $C_{max}$ increased 1.35-fold and 1.44-fold, respectively, compared with those after vitamin C gel without application with vibrating microneedles. The present study suggests that vibrating microneedles can be used to facilitate the skin permeability of vitamin C under optimal conditions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1995.05a
• /
• pp.23-29
• /
• 1995

Fafbric 4종, 수지2종과 상용화된 프리프레그 2종에 대한 내열특성에 관하여 비교 연구 하였다. Fabric의 특성은 알려진 바와 같이 PAN계 카본 fabric의 경우 내삭마성은 우수하나 단열성능이 떨어지고, Rayon계의 경우는 그 반대이다. 공정성면에서는 rayon spun yarn으로 제직한 경우가 가장 우수한 것으로 나타났다. Spun PAM으로 제직한 경우는 직조후 탄화공정을 채택함으로써. 노즐재료로서 PAN계 탄소섬유의 사용을 가능하게 하였지만 즉 공정성은 좋으나 단열성 및 내삭마성 모두가 떨어졌다. F940수지의 경우는 SC1008과 페놀수지의 화학적특성은 다소 차이가 있으나 물리적특성이나 열적특성은 거의 유사한 것으로 나타났다. 프리프레그의 제조는 각수지와 Fabric의 조건에 맞게 R/C, V/C를 조정하여 코팅하였다. 토오치 테스트등 결과들을 종합해보면 전체적인 노즐재료로서의 성능은 아직은 Rayon계 카본이 우수한것으로 판단할수 있으나, 보다 정확한 평가를 위해서는 실제 노즐 테스트가 필요하다.