• Korean Journal of Materials Research
• /
• v.9 no.4
• /
• pp.355-361
• /
• 1999

We have synthesized the soluble polymide based side chain system with covalently attached NLO chromophore Disperse Red 1. The developed polymer is optically transparent in the range of optical communication wave-lengths. Its glass transition temperature$(T_g)$ and thermal decomposition temperature$(T_d)$ are $225^{\circ}C, 310^{\circ}C$ respectively. The poled film with the poling field of $100 V/\mu\textrm{m}$ shows that the dielectric constant is 3.37 at the 10-kHz frequency, the refractive indices of TM and TE modes are both 1.631 at $\lambda = 1300 nm$, and the Electro-optic coefficients are 4.6~9.2 pm/V at $\lambda = 1300 nm$. There are no decays of the EO coefficient in the poled polymer at $180^{\circ}C$ in one hour, and $90^{\circ}C$ in 500 hours.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.7
• /
• pp.897-902
• /
• 2004

PSMC5 subunit, which belongs to the 26S proteasomal subunit family, plays an important role in the antigen presentation mediated by MHC class I molecular. Full-length cDNA of porcine PSMC5 was isolated using the in silico cloning and rapid amplification of cDNA ends (RACE). Amino acid was deduced and the primary structure was analyzed. Results revealed that the porcine PSMC5 gene shares the high degree of sequence similarity with its mammalian counterparts at both the nucleotide level and the amino acid level. The RT-PCR was performed to detect the porcine PSMC5 expression pattern in seven tissues and the result showed that high express level was observed in spleen, lung, marrow and liver while the low express level was in muscle. The full-length genomic DNA sequence of porcine PSMC5 gene was amplified by PCR and the genomic structure revealed that this gene was comprised by 12 exons and 11 introns. Best alignment of the cDNA and genomic exon DNA sequence presents 4 mismatches and this information potentially bears further study in gene polymorphisms.

• Macromolecular Research
• /
• v.16 no.7
• /
• pp.575-585
• /
• 2008

There are two beamlines (BLs), 4C1 and 4C2, at the Pohang Accelerator Laboratory that are dedicated to small angle X-ray scattering (SAXS). The 4C1 BL was constructed in early 2000 and is open to public users, including both domestic and foreign researchers. In 2003, construction of the second SAXS BL, 4C2, was complete and commissioning and user support were started. The 4C2 BL uses the same bending magnet as its light source as the 4C1 BL. The 4C1 BL uses a synthetic double multilayer monochromator, whereas the 4C2 BL uses a Si(111) double crystal monochromator for both small angle and wide angle X-ray scattering. In the 4C2 BL, the collimating mirror is positioned behind the monochromator in order to enhance the beam flux and energy resolution. A toroidal focusing mirror is positioned in front of the monochromator to increase the beam flux and eliminate higher harmonics. The 4C2 BL also contains a digital cooled charge coupled detector, which has a wide dynamic range and good sensitivity to weak scattering, thereby making it suitable for a range of SAXS and wide angle X-ray scattering experiments. The general performance of the 4C2 BL was initially tested using standard samples and further confirmed by the experience of users during three years of operation. In addition, several grazing incidence X-ray scattering measurements were carried out at the 4C2 BL.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.964-966
• /
• 2005

아이락(Airac)은 C 프로그램의 버퍼오버런(buffer overrun)오류를 찾아주는 정적 프로그램 분석기(static program analyzer)이다. 아이락은 요약해석(abstract interpretation)의 틀 속에서 디자인되었다. 설계 및 구현 과정에서 프로그램 분석 분야에서 축적되어온 다양한 기술들을 적용하여 분석의 성능 및 정확도 향상을 이룩하였다. 아이락은 리눅스 커널(linux kernel), GNU 소프트웨어, 상용 소프트웨어등에 적용되어 오류를 찾아냈다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.1045-1048
• /
• 2007

We mainly report recent progress in backlight unit (BLU) for liquid crystal display (LCD) using printed carbon nanotubes (CNTs) including top-gate and lateral gate structures. Lighting performances of CNTBLU and longevity of printed CNT emitters are intensively discussed. Selected issues related with field emission display (FED) using the same emitters also are presented.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.30 no.2
• /
• pp.100-106
• /
• 2018

Recently, the development of a heat pump technology to recover process waste heat and to generate steam of $120^{\circ}C$ or higher required for industrial processes, has attracted attention. The research of conventional heat pump utilizing the available energy is used primarily for air conditioning, and the production temperature is about $60^{\circ}C$, so it is difficult to utilize it for industrial use. Therefore, in this study, we developed a steam heat pump (SGHP) which recovers the waste heat of process and generates steam at $120^{\circ}C$. The low-pressure refrigerant R245fa, considered to be an eco-friendly refrigerant, has been selected as the refrigerant for SGHP in this study since its Ozone Depletion Potential (ODP) is zero and the Global Warming Potential (GWP) is relatively low. A flash tank functioning as a phase separator was installed in the rear stage of the condenser, and the saturated water of high temperature was decompressed to generate steam. It was started at the initial temperature of $70^{\circ}C$, and it was confirmed that $120^{\circ}C$ steam was produced after the system stabilized. We have conducted experiments by modifying the system, and ultimately achieved a heating capacity of 101.4 kW and a COP of 3.05.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.270-273
• /
• 2006

This paper presents a gas turbine data acquisition and monitoring system using a LabVIEW programming. The developed real-time monitoring system entitled a C-Tune DAS plays an important role to make an analysis of the real-time operation of the gas turbine under maintenance. The LabVIEW based software is divided into three parts according to their original functions; Data acquisition, Data analysis and display, and Data storage. The data acquisition part receives data from a PMS (Plant Management System) server and two cFPs (Compact-Field Point). To verify the validity of the developed system, it is applied to gas turbines in the combined cycle power plant in Korea.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.5
• /
• pp.542-549
• /
• 2016

This paper presents a SoC (System-on-a-Chip) dedicated for a single-chip smart capsule which can be used to continuously monitor human alimentary canal pH and temperature values. The SoC is composed of the pH and temperature sensor interface circuit, a wireless transceiver, the power management circuit and the flow control logic. Fabricated in $0.18{\mu}m$ standard CMOS technology, the SoC occupies a die area of ${\sim}9 mm^2$. The SoC consumes 6.15 mW from a 3 V power supply, guaranteeing the smart capsule battery life is no less than 24 hours when using 50 mAh coin batteries. The experimental results show that measurement accuracy of the smart capsule is ${\pm}0.1$ pH and ${\pm}0.2^{\circ}C$ for pH and temperature sensing, respectively, which meets the requirement of in-body pH and temperature monitoring in clinical practice.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.315-317
• /
• 1995

A simple drive circuit without position sensors for a switched reluctance motor is presented. The turn on and turn off points are determined by detecting the rate of change of the active phase current. The drive circuit consists of a current sensing resistor, RC filter, comparator, OP Amp, and OR gates. It is verified through the experiments that the switched reluctance motor with the proposed sensorless drive circuit is well operated in wide speed ranges.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.321-324
• /
• 1995

Switched reluctance motors and drives are increasingly used in high speed applications due to their robust mechanical structures, low inertia, and reduction in the rotor losses. The turn-on angle has to be advanced as the motor speed increases, but it may cause the starting problem in some rotor positions. In this paper, the characteristics of the maximum speed and input voltage with the advance angle at high speeds is investigated. To overcome the starting problem and reduce the torque ripple, conduction overlapping is added in adjacent phases. The effectiveness of conduction overlapping is verified through the simulation and experiments.