• Elastomers and Composites
• /
• v.48 no.2
• /
• pp.94-102
• /
• 2013

Characteristics of rubber mixture were evaluated in order to find the optimum mixing conditions of compounds containing silica and silane at various temperatures. With different mixing temperatures of 105, 120, 130, 140 and $160^{\circ}C$, the viscosity of the compound mixed at $105^{\circ}C$ showed a very high viscosity value. Compounds mixed the temperature range from at $120^{\circ}C$ to $140^{\circ}C$ showed lower viscosity than the compound mixed at $105^{\circ}C$. However, the difference was found to be small in those temperature ranges. On the contrary, at the mixing temperature of $160^{\circ}C$, the viscosity of compound increased again. Through the physical and dynamic observations, it was verified that at the mixing temperature below $120^{\circ}C$ only insufficient silica-silane reaction has been obtained. In addition, with the elevated mixing temperature of $160^{\circ}C$, Cross-linking occurred during mixing by the sulfur contained in coupling agent. In the temperature ranges from $120^{\circ}C$ to $140^{\circ}C$, because of the fast coupling reaction at higher temperature, it was thought to be more advantageous during reaction even though the trend of viscosity and dynamic mechanical property was not clear.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.873-876
• /
• 2004

New Oligothiophene derivatives having liquid crystalline property have been designed, synthesized and characterized. New oligothiophene derivatives were prepared by a palladium-catalyzed cross-coupling reaction via zinc-substituted thiophene. The structures of materials were characterized by various spectroscopies. The new obtained oligothiophene derivatives showed high thermal stability above 300 $^{\circ}C$ and exhibited several transition temperatures, evidence of mesophase. In field-effect transistors, a charge carrier mobility of 1.9 x $10^{-2}$ $cm^2$/Vs was observed.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.777-783
• /
• 2013

We used dipodal type bis[3-(trimethoxysilyl)propyl]amine (BTMA) silane coupling agent to modify silica nanoparticles to introduce secondary amino groups on the silica surface. These grafted N-H groups were reacted with glycidyl methacrylate (GMA) to introduce polymerizable methacrylate groups on the silica surface. After modification reaction, we used several analytical techniques such as Fourier transform infrared spectroscopy (FTIR), elemental analysis (EA) and solid state $^{13}C$ cross-polarization magic angle spinning (CP/MAS) nuclear magnetic resonance spectroscopy (NMR) to analyze the effects of reaction time, reaction temperature and used GMA concentration on the modification degree between N-H groups on the silica surface and epoxide groups of GMA. We found increased introduction of methacrylate groups on the silica surface by ring opening reaction of epoxide groups of GMA with N-H groups on BTMA treated silica with increased reaction time, reaction temperature and used GMA concentration within our experimental conditions.

• Polymer(Korea)
• /
• v.38 no.2
• /
• pp.257-264
• /
• 2014

In this study, we modified silica nanoparticles with bis[3-(trimethoxysilyl)propyl]ethylenediamine (BTPED) silane coupling agent, which has two secondary amino groups in a molecule, to introduce amino groups on the silica surface. After modification of silica, we used acrylate group containing 3-(acryloyloxy)-2-hydroxypropyl methacrylate (AHM) to introduce polymerizable methacrylate groups by Michael addition reaction. We used Fourier transform infrared spectroscopy (FTIR), elemental analysis (EA) and liquid and solid state cross polarization magic angle spinning (CP/MAS) nuclear magnetic resonance spectroscopy (NMR) to understand the reactions between N-H groups of BTPED modified silica surface and acrylate groups of AHM monomer. We confirmed Michael addition reaction between BTPED modified silica and AHM completed in 2 hr reaction time. We also found increased methacrylate group introduction with increase of mol ratio of the acrylate group of AHM to N-H group of BTPED modified silica by increase of C=O peak area of measured FTIR spectra. These results were also supported by EA and solid state $^{13}C$ and $^{29}Si$ NMR results.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.161-161
• /
• 2006

New polymeric and oligomeric OTFT materials containing fused aromatics such as anthracene and naphthalene have been designed, synthesized and characterized. The new OTFT materials were prepared by palladium-catalyzed Suzuki cross-coupling reaction. The obtained materials were characterized by various spectroscopic methods such as UV-vis, PL, cyclovoltametry, and XRD. The obtained OTFT materials containing fused aromatics showed high thermal stability above $350^{\circ}C$ In OTFT devices using new materials, high charge carrier mobility and on/off ratio were observed.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.372-379
• /
• 2012

In this study, we treated silica nanoparticles with bis[3-(trimethoxysilyl)propyl]amine (BTMA) silane coupling agent to modify their surfaces. We investigated the effects of BTMA hydrolysis time, BTMA concentration and BTMA treatment time on the degree of silanization reaction of silica nanoparticles. We used Fourier transform infrared spectroscopy (FTIR), elemental analysis (EA) and solid state cross-polarization magic angle spinning (CP/MAS) nuclear magnetic resonance spectroscopy (NMR) to obtain quantitative data. We found the decrease of isolated Si-OH peak intensity at 3747 $cm^{-1}$ and the increase of $-CH_2 $stretching and bending peaks with increasing hydrolysis time, concentration and treatment time of BTMA. EA analysis results also supported this trend. We found a strong effect of BTMA concentration on the degree of silanization of the silica particles, but weak effects of the hydrolysis time and the treatment time.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.7
• /
• pp.986-990
• /
• 2006

As key nucleoside intermediates for the preparation of cyclic adenosine diphosphate ribose (cADPR, 1) analogues, 8-alkyl-2' (or 3')-azido(or amino)-adenosine derivatives (16-19) were successfully prepared by alkylating selectively protected adenosine derivatives (12, 13) via Pd(0) catalyzed cross-coupling reaction with tetraalkyltin reagents, followed by the sugar modification of these 8-alkyl-adenosine derivatives according to our precedent procedure. Compared to other precedent procedures, our 8-alkylation methodology using selectively TBDMS-protected 8-alkyl adenosine derivatives as starting materials will be utilized very conveniently to prepare highly functionalized adenosine analogues, which will be serve as key intermediates for the cADPR.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.432.2-432.2
• /
• 2016

A new A-D-A type (Acceptor-Donor-Acceptor) conjugated based on pyridine-borane complex (Donor), non-boron fluorine (Donor) and 2,5-bis(alkyl)-3,6-di(thiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione (DPP) (Acceptor) were designed and synthesized via Pd-catalyzed Suzuki cross-coupling reaction. The synthesized boron based complex exhibited high electron affinity, which indicates deep HOMO energy levels and good visible absorption led to their use as donors in BHJ (bulk heterojunction) solar cells. Inverted devices were fabricated, reaching open-circuit voltage as high as 0.91eV. To probe structure-property relationship and search for design principle, we have synthesized pyridine-boron based electron donating small molecules. In this study, we report a new synthetic approach, molecular structure, charge carrier mobility and morphology of blended film and their correlation with the photovoltaic J-V characteristics in details.

• Applied Chemistry for Engineering
• /
• v.19 no.3
• /
• pp.299-303
• /
• 2008

A thermally cross-linkable polymer, poly[(2,5-dimethoxy-1,4-phenylenevinylene)-alt-(1,4-phenylenevinylene)] (Cross-PPV), was synthesized by the Heck coupling reaction. In order for the polymer to be cross-linkable, 20 mol% excess divinylbenzene was added. The chemical structure of Cross-PPV and thermally crosslinked Cross-PPV were confirmed by FT-IR spectroscopy. From the FT-IR, UV-Vis, and PL spectral data, thermally crosslinked Cross-PPV was insoluble in common organic solvents. The HOMO and LUMO energy level of thermally cross-linked Cross-PPV were estimated -5.11 and -2.56 eV, respectively, which were determined by the cyclic voltammetry and UV-Vis spectroscopy. From the energy level data, one can easily notice that thermally crosslinked Cross-PPV can be used for hole injection layer effectively. Bilayer structured device (ITO/crosslinked Cross-PPV/PM-PPV/Al) was fabricated using poly(1,4-phenylenevinylene-(4-dicyanomethylene-4H-pyran)-2,6-vinylene-1,4-phenylenevinylene-2,5-bis(dodecyloxy)-1,4-phenylenevinylene (PM-PPV) as the emitting layer, which have HOMO and LUMO energy levels of -5.44 eV and -3.48 eV, respectively. The bilayered device had much enhanced the maximum efficiency (0.024 cd/A) and luminescence ($45cd/m^2$) than those of a single layer device (ITO/PM-PPV/Al, 0.003 cd/A, $3cd/m^2$). The enhanced performance originated from that fact that cross-linked Cross-PPV facilitatse the hole injection to the emissive layer and the injected hole and electron from ITO and Al are recombined in emitting layer (PM-PPV) effectively.

• Journal of the Korean Chemical Society
• /
• v.37 no.2
• /
• pp.228-236
• /
• 1993

The effect of ferric ion on the reaction of CH_3$MgI with benzylbromide was investigated by determining the product ratio between cross-coupling product, ethylbenzene (A) and homocoupling product, bibenzyl (B) in the presence of ferric ion. When CH_3$MgI prepared with pure magnesium was used, the ratio of A to B was 22 to 78 and with reagent grade magnesium, the ratio became 33 to 67 indicating that metallic impurities in magnesium affect the reaction mechanism to lead less homocoupling product, B. The ratio changes became significant when ferric chloride was added in the reaction mixture in catalytic amounts and the ratio of A to B reached to 80 to 20 at maximum. The reaction in the presence of ferric ion seems to follow mainly an ionic mechanism which involves iron-benzyl bromide ${\pi}$-complex formation. The complex formation is expected to be able to enhance ionic attack of CH_3$MgI on benzyl carbon to give more A.