• IT SoC Magazine
• /
• s.19
• /
• pp.24-28
• /
• 2007

올해 44회를 맞이한 DAC(Design Automation Conference)는 6월 4일부터 8일까지 5일간 캘리포니아 샌디에고에서 개최되었다. 이번 DAC에도 샌프란시스코에서 열렸던 43회 DAC와 마찬가지로 인텔, IBM, ARM, Sun Microsystems 등 첨단 SoC/IP 설계회사와 Cadence, Synopsys 등 EDA 개발회사, 그리고 TSMC, UMC 등 유수의 파운드리회사들이 참가하였다. 전시회 참여업체는 약 250여개로 예년보다 약간 증가하였고 총 참관객수는 11,000여명으로 다소 줄어들었다. 하지만 국내 참여업체 관계자들은 참관객들의 질적인 수준이 작년 DAC보다 더 높아 제품을 홍보하고 관련 업계 사람들과 정보를 교환하기에 더없이 좋은 기회였다고 평가했다. 또한 이번 DAC 컨퍼런스는 총 10개 트랙, 53개의 세션들이 진행되었으며 약 161개의 논문이 발표되어 매우 역동적인 기술교류가 이루어졌다. 여기에서는 44th DAC의 주요 이슈와 전시회에 참여하였던 국내 SoC업체들의 제품에 대해 살펴 보고자한다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.6
• /
• pp.7-15
• /
• 2010

Recently, with the high performance and efficiency of machine, there have been required the multi-functions in various machine parts, such as the heat resistance, the abrasion resistance and the stress resistance as well as the strength. Fatigue crack growth tests were carried out to investigate the fatigue characteristics of high carbon steel (SM53C) experienced by high-frequency induction treatment. The Cam nose part of the Automobile's Cam shaft is strongly bumped with rocker arm or valve-lift. Therefore abnormal wear such as unfair wear and early wear occur in the surface. This abnormal wear causes a defect that bad timing open and close actions of the engine valve happen in the combustion chamber so the fuel gas will be combustion imperfect. Therefore, the cam shaft demands high hardness and wear resistance. In this study, high frequency heat treatment has been accomplished while wear test for material SM53C.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.5
• /
• pp.431-434
• /
• 1990

Template condensation reaction of diethylenetriamine, ethylenediamine, methylamine, and formaldehyde in the presence of Ni(II) or Cu(II) ion yields new saturated hexaaza macrobicyclic complexes $[Ni(C)]^{2+}\;and\;[Cu(C)]^{2+}$, where C is 8-methyl-1,3,6,8,10,13-hexaazabicyclo[11,2,1]hexad ecane. The macrobicyclic complexes contain one 1,3-diazacyclopentane ring and one methyl pendant arm in the ligand C and have square planar geometry with 5-6-5-6 chelate ring sequence. Synthesis, characterization, and the properties of the macrobicyclic complexes are described.

• Journal of Animal Science and Technology
• /
• v.45 no.1
• /
• pp.1-12
• /
• 2003

The present study was carried out to establish the standard karyotype of the Korean Native Chicken and to find their chromosomal band markers using high-resolution banding technique. Chromosome analysis was performed on early chick embryos following in vitro culture of fertilized eggs of the yellow-brown and the red-brown lines of the Korean Native Chicken which had been established at National Livestock Research Institute. The high-resolution banding of the chromosome was achieved by treating the embryos with ethidium bromide and colchicine during culture. On GTG-banding, the Korean Native Chicken exhibited a typical chick banding pattern in all the macrochromosomes. Overall chromosomal morphology and positions of typical landmarks of the Korean Native Chicken were virtually identical to those of White Leghorn and International System for Standardized Avian Karyotypes(ISSAK). However, the lengths and G-band numbers of the Korean Native Chicken macrochromosomes were greater than those of White Leghorn and ISSAK. Especially in chromosomes 1 and Z, the Korean Native Chicken exhibited more separated bands in compared with ISSAK. In C-banding patterns, although a lot of observed cells had C-band polymorphic patterns, almost the Korean Native Chicken macrochromosomes had heterochromatic C-band on centromeres and/or near terminal part. However, the heterochromatic C-band was constantly observed at the end of q-arm of Z chromosomes and on the whole W chromosome. In addition, the Korean Native Chicken exhibited distinctive heteromorphic patterns of C-bands on the centromere of chromosome 3 and at the end of q-arm of Z chromosome between homologous chromosomes.

• Progress in Medical Physics
• /
• v.27 no.4
• /
• pp.241-249
• /
• 2016

The present study used a digital angiography x-ray device to measure the space dose and exposure dose of patients and practitioners using x-ray tube shielding devices developed in our laboratory. The intent of the study was to reduce the space dose within the test room, and to reduce the exposure dose of patients and practitioners. The patient and practitioner exposure doses were measured in five configurations in a human body model. The glass dosimeter was placed on the eye lenses, thyroid glands, left shoulder, right shoulder, and gonads. The beam was collimated at full size and at a 48% reduction for a comparative analysis of the measurements. The space dose was measured with an ion chamber at distances of 50 cm, 100 cm, and 150 cm from the x-ray tube under the following conditions: no shielding device; a shielding device made of 3-mm-thick lead (Pb) [Pb 3 mm shield], and a shielding device made of 3-mm-thick Pb (outside) and 3-mm-thick aluminum (Al) (inside) [Pb 3 mm＋Al 3 mm shield]. The absorbed dose was the lowest when the 3-mm-thick Pb＋3-mm-thick Al shield was used. For measurements made with collimated beams with a 48% reduction, the dose was the lowest at $154{\mu}Gy$ when the 3-mm-thick Pb＋3-mm-thick Al shield was used, and was $9{\mu}Gy$ lower than the measurements made with no shielding device. If the space dose can be reduced by 20% in all situations where the C-arm is employed by using the x-ray tube shielding devices developed in our laboratory, this is expected to play an important role in reducing the annual exposure dose for patients, practitioners, and assistants.

• Physical Therapy Korea
• /
• v.23 no.2
• /
• pp.84-92
• /
• 2016

Background: Strengthening the supraspinatus is an important aspect of a rehabilitation program for subacromial impingement and tendinopathy. Many authors recommended empty-can (EC), full-can (FC), and prone full-can (PFC) exercises to strengthen the supraspinatus. However, no ultrasonography study has yet investigated supraspinatus muscle architecture (muscle thickness; MT, pennation angle; PA, fiber bundle length; FBL) in relation to supraspinatus strengthening exercises. Objects: The purpose of this study was to compare the architecture (MT, PA, and FBL) of the supraspinatus muscle during three different types of exercises (EC, FC, and PFC) using diagnostic ultrasound. Methods: Participants performed three different exercises: (A) EC; the arm was maintained at $60^{\circ}$ abduction with full internal rotation in the sitting position, (B) FC; the arm was maintained at $60^{\circ}$ abduction with full external rotation in the sitting position, and (C) PFC; the arm was maintained at $60^{\circ}$ abduction with full external rotation in the prone position. Ultrasonography was used to measure the MT, PA and FBL of the supraspinatus. One-way repeated analysis of variance with Bonferroni's post-hoc test was used to compare between the three exercises and the initial position of each exercise. Results: Compared with each initial position, the FC exercise showed the greatest mean difference in muscle architecture properties and the PFC exercise showed the least mean difference. Conclusion: The findings suggest that the FC exercise position may have an advantage in increasing the amount of contractile tissue or producing muscle power and the PFC exercise position may be useful in a rehabilitation program because it offers the advantage of maintaining the muscle architecture properties.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.8 no.2
• /
• pp.195-200
• /
• 2004

Trypsin can be immobilized on silk fibroin fiber (SFF) by introducing several spacer arms, such as ethylene diamine (ED), bovine serum albumin (BSA) and silk sericin (SS). Direct immobilization on silk fiber (SFFGA) has low activity because of the steric hindrance between the trypsin and substrate. The introduction of spacer arms onto SFF-GA can enhance the activity of trypsin by reducing the steric hindrance. When ED is used as a spacer arm, the activity of trypsin has increased but its stability decreased due to the increased hydrophobicity of SFF. BSA and SS, as a spacer arm, have better results in both activity and stability. SFF-BSA shows some decrease in the specific activity due to improper immobilizatin. SFF-SS maintained 90% of its initial activity even after 12 hrs incubation at $50^{\circ}C$. In the case of repeated hydrolysis of silk sericin with immobilized trypsin, SFF-GA and SFF-ED lost 50% of their initial activity right after first run, whereas SFF-BSA and SFF-SS maintained 80% of their initial activities even after 5 runs. Higher operational stability is due to increased hydrophilicity of SFF by introducing hydrophilic spacer arms such as BSA and SS. The high content of serine in SS increases the hydrophilicity of SFF resulting the best results among other spacer arms.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.17-22
• /
• 2009

DaVinci processors are popular media processors for implementing embedded multimedia applications. They support dual core architecture: ARM9 core for video I/O handling as well as system management and peripheral handling, and DSP C64+ core for effective digital signal processing. In this paper, we propose our efforts for optimal implementation of object tracking algorithm in DaVinci-based smart camera which is being designed and implemented by our laboratory. The smart camera in this paper is supposed to support object detection, object tracking, object classification and detection of intrusion into surveillance regions and sending the detection event to remote clients using IP protocol. Object tracking algorithm is computationally expensive since it needs to process several procedures such as foreground mask extraction, foreground mask correction, connected component labeling, blob region calculation, object prediction, and etc. which require large amount of computation times. Thus, if it is not implemented optimally in Davinci-based processors, one cannot expect real-time performance of the smart camera.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.9 no.2
• /
• pp.5-11
• /
• 2003

Thoracic outlet syndrome is actually a collection of syndromes brought about by abnormal compression of the neurovascular bundle by bony, ligamentous or muscular obstacles between the cervical spine and the lower border of the axilla. First of all a syndrome is defined as a group of signs and symptoms that collectively characterize or indicate a particular disease or abnormal condition. The neurovascular bundle which can suffer compression consists of the brachial plexus plus the C8 and T1 nerve roots and the subclavian artery and vein. The brachial plexus is the network of motor and sensory nerves which innervate the arm, the hand, and the region of the shoulder girdle. The vascular component of the bundle, the subclavian artery and vein transport blood to and from the arm. the hand. the shoulder girdle and the regions of the neck and head. The bony, ligamentous, and muscular obstacles all define the cervicoaxillary canal or the thoracic outlet and its course from the base of the neck to the axilla or arm pit. Look at the scheme of this region and it all becomes more easily understood. Compression occurs when the size and shape of the thoracic outlet is altered. The outlet can be altered by exercise, trauma, pregnancy, a congenital anomaly, an exostosis, postural weakness or changes. Thoracic outlet syndrome has been described as occurring in a diverse population. It is most often the result of poor or strenuous posture but can also result from trauma or constant muscle tension in the shoulder girdle. The first step to beginning any treatment begins with a trip to the doctor. Make a list of all of the symptoms which seem to be present even if the sensations are vague. Make a note of what activities and positions produce or alleviate the symptoms and the time of day when symptoms are worst. Also, note when the symptoms first appeared. This list is important and should also include any questions one may have.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.3
• /
• pp.155-161
• /
• 2021

Objective: There is a lack of studies using the 3D-2D image registration techniques on the mechanism of a shoulder injury for ice hockey players. This study aimed to analyze in vivo 3D glenohumeral joint arthrokinematics in collegiate ice hockey athletes and compare shoulder scaption with or without a hockey stick using the 3D-2D image registration technique. Method: We recruited 12 male elite ice hockey players (age, 19.88 ± 0.65 years). For arthrokinematic analysis of the common shoulder abduction movements of the injury pathogenesis of ice hockey players, participants abducted their dominant arm along the scapular plane and then grabbed a stick using the same motion under C-arm fluoroscopy with 16 frames per second. Computed tomography (CT) scans of the shoulder complex were obtained with a 0.6-mm slice pitch. Data from the humerus translation distances, scapula upward rotation, anterior-posterior tilt, internal to external rotation angles, and scapulohumeral rhythm (SHR) ratio on glenohumeral (GH) joint kinematics were outputted using a MATLAB customized code. Results: The humeral translation in the stick hand compared to the bare hand moved more anterior and more superior until the abduction angle reached 40°. When the GH joint in the stick hand was at the maximal abduction of the scapula, the scapula was externally rotated 2~5° relative to 0°. The SHR ratio relative to the abduction along the scapular plane at 40° indicated a statistically significant difference between the two groups (p < 0.05). Conclusion: With arm loading with the stick, the humeral and scapular kinematics showed a significant correlation in the initial section of the SHR. Although these correlations might be difficult in clinical settings, ice hockey athletes can lead to the movement difference of the scapulohumeral joints with inherent instability.