• Progress in Superconductivity
• /
• v.11 no.2
• /
• pp.83-86
• /
• 2010

There are theoretical and experimental evidences for the pseudo-gap in electron doped cuprates being due to interaction between electrons and anti-ferromagnetism(AFM). A remaining issue is on how AFM correlates with pseudo-gap, and eventually with superconductivity. To elucidate the issue, we have performed temperature dependent angle-resolved photoemission studies of an e-doped cuprate superconductor $Sm_{2-x}Ce_xCuO_4$(SCCO) x=0.18 at 20K and 150K. In the case of $Nd_{2-x}Ce_xCuO_4$, the most well known e-doped cuprate, pseudo-gap disappears at around 100 K for x=0.17. Our experimental result reveals that the pseudo-gap of SCCO exists even at 150K for x=0.18. This result implies that the AFM of SCCO survives even in x=0.18, which agrees with previously reported phase diagram of SCCO. Yet, the superconductivity disappears around x=0.18 for both NCCO and SCCO in spite of the difference in the magnetic order. This result sheds a light on the disappearance of superconductivity on the over-doped side.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.4
• /
• pp.640-645
• /
• 2010

This paper describes the power generating property of hydrothermally grown ZnO nanorods on a flexible polyethersulfone (PES) substrate. The piezoelectric currents generated by the ZnO nanorods were measured when bending the ZnO nanorod by using I-AFM, and the measured piezoelectric currents ranged from 60 to 100 pA. When the PtIr coated tip bends a ZnO nanorod, piezoelectrical asymmetric potential is created on the nanorod surface. The Schottky barrier at the ZnO-metal interface accumulates elecntrons and then release very quickly generating the currents when the tip moves from tensile to compressed part of ZnO nanorod. These ZnO nanorods were grown almost vertically with the length of 300-500 nm and the diameter of 30-60 nm on the Ag/Ti/PES substrate at $90^{\circ}C$ for 6 hours by hydrothermal method. The metal-semiconductor interface property was evaluated by using a HP 4145B Semiconductor Parameter Analyzer and the piezoelectric effect of the ZnO nanorods were evaluated by using an I-AFM. From the measured I-V characteristics, it was observed that ZnO-Ag and ZnO-Au metal-semiconductor interfaces showed an ohmic and a Schottky contact characteristics, respectively. ANSYS finite element simulation was performed in order to understand the power generation mechanism of the ZnO nanorods under applied external stress theoretically.

• Asian-Australasian Journal of Animal Sciences
• /
• v.4 no.2
• /
• pp.169-176
• /
• 1991

Four fibrous feedstuffs from alfalfa meal (AFM), cassava leaf meal (CLM), rubber seed meal (RSM) and leucaena meal (LM) were included in semi-purified diets for growing pig (45 kg body wt.) at 20%, to investigate the effects of these fiber sources and fractions on amino acid digestibility. Cellulose (C), a purified fiber source was included in another diet at 5% level for comparison. The barrows fitted with ileal T-cannula were used in the digestion trials with latin square design. The digestibilities of amino acids were measured at both terminal ileum and fecal level. NDF and hemicellulose content were the highest in AFM-diet whereas LM-diet had the highest ADF and lignin content. RSM-diet contained the highest crude fiber and cellulose content. The digestibilities of amino acids at ileal level were found the highest with CLM-diet, while LM-diet was the least. At fecal level, control diet and CLM-diet were the highest in amino acid digestibility while AFM-diet was the least. The digestibility of amino acids was higher at ileal than fecal level. The digestibility of arginine was not affected with fiber fractions but was found to be the most disestible across all diets. The most depressed amino acid was methionine at both levels; praline and glycine, in the dispensable amino acid group, were depressed at ileal and fecal level, respectively. Lignin did not depress amino acid digestibility in general but specifically depressed methionine, histidine, isoleucine and threonine digestibility. Cellulose content did not affect amino acid digestibility but undesirable factors might be responsible.

• Journal of the Korean Vacuum Society
• /
• v.17 no.3
• /
• pp.215-219
• /
• 2008

The bonding structure and composition of silicon nitride (SiNx) films were investigated by using Fourier transform infrared spectroscopy (FT-IR). SiNx films were deposited on Si substrate at $340^{\circ}C$ using a conventional PECVD system. The compositions of Si and N in SiNx films were confirmed by using Rutherford backscattering spectroscopy (RBS) and photoluminescence (PL) analysis. The surface morphology of SiNx films was also analyzed by using atomic force microscopy (AFM). It was found that the contents of NH(at. %) is the reverse related with those of SiH corresponding to the result of FT-IR. we conclude that a quantitative analysis on SiNx films can be possible through a precise detection of the contents of H in SiNx films with a FT-IR analysis only.

• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.328-336
• /
• 2005

Effects of surface defect distribution on flame instability during flame-surface interaction are experimentally investigated. To examine the chemical quenching phenomenon, we prepared thermally grown silicon oxide plates with well-defined defect density. Ion implantation was used to control the number of defects, i.e. oxygen vacancies. In an attempt to preferentially remove the oxygen atoms from silicon dioxide surface, argon ions with low energy level from 3keV to 5keV were irradiated at the incident angle of $60^{\circ}C$. Compositional and structural modification of $SiO_2$ induced by low-energy $Ar^+$ ion irradiation has been characterized by Atomic Force Microscopy (AFM) and X-ray Photoelectron Spectroscopy (XPS). The analysis shows that as the ion energy increases, the number of structural defect also increases and non-stoichiometric condition of $SiO_x(x{\le}2)$ plates is enhanced. From the quenching distance measurements, we found out that when the surface temperature is under $300^{\circ}C$, the quenching distance decreases on account of reduced heat loss; as the surface temperature increases over $300^{\circ}C$, however, quenching distance increases despite reduced heat loss effect. Such aberrant behavior is caused by heterogeneous chemical reaction between active radicals and surface defect sites. The higher defect density, the larger quenching distance. This results means that chemical quenching is governed by radical adsorption and can be parameterized by the oxygen vacancy density on the surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.150-150
• /
• 2008

본 연구에서는 Wet chemistry damage가 Nanopatterned p-ohmic electrode에 미치는 영향을 연구하였다. Nanopattern은 Metal clustering을 이용하여, P-GaN와 Ohmic형성에 유리한 Pd을 50$\AA$ 적층한 후 Rapid Thermal Annealing방법으로 $850^{\circ}C$, $N_2$분위기에서 3min열처리를 하여 Pd Clustering mask 를 제작하였다. Wet etching은 $85^{\circ}C$, $H_3PO_4$조건에서 시간에 따라 Sample을 Dipping하는 방법으로 시행하였다 Ohmic test를 위해서 Circular - Transmission line Model 방법을 이용하였으며, Atomic Force Microscopy과 Parameter Analyzer로 Nanopatterned GaN surface위에 형성된 Ni/ Au Contact에서의 전기적 분석과, 표면구조분석을 시행하였다. AFM결과 Wet처리시간에 따라서 Etching형상 및 Etch rate이 영향을 받는 것이 확인되었고, Ohmic test에서 Wet chemistry처리에 의한 Tunneling parameter와 Schottky Barrier Height가 크게 증/감함을 관찰하였다. 이러한 결과들은 Wet처리에 의해서 발생된 Defect가 GaN의 표면과 하부에서 발생되며, Deep acceptor trap 및 transfer거동과 밀접한 관련이 있음을 확인 할 수 있었다. 보다 자세한 Transport 및 Wet chemical처리영향에 관한 형성 Mechanism은 후에 I-V-T, I-V, C-V, AFM결과 들을 활용하여 발표할 예정이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.107-107
• /
• 1998

GaN 에피택시 층의 전기적, 광학적 특성 및 표면 형상의 향상을 위한 전처리 공 정으로서 사파이어 기판의 질화 처리가 많이 행해지고 있는데 이는 표면에 질화 충올 형성시킴으로서 GaN 충과의 계면에너지 및 격자상수 불일치를 줄여 GaN 충의 성장을 촉진시킬 수 있기 때문이다 본 실험에서는 고 진공 하에서 유도 결합 플라즈마를 이용하여 사파이어 기판의 질화 처리를 행한 후 XPS와 AFM을 이용하여 기판 표면의 질소 조성과 표면 형상을 관찰하였다. 기판 표면의 질소 조성은 질소 가스의 유입량과 기판의 온도보다 칠화 시 간 및 RF-power에 의해 크게 좌우되나 표면 형상은 기판의 온도에 크게 영향올 받는 것으로 나타났다. 따라서 본 실험에서는 기판의 온도를 낮춤으로서 protrusion이 없는 매끈한 표면의 질화 충을 얻올 수 있었다. 핵생성 충의 성장 없이 450 oC의 저온에서 GaN 충올 성장시킨 결과 육방 대청성 의 wurtzite구조를 가지며 bas허 plane이 사파이어 기판과 in-plane에서 300 회전된 관계 를 갖고 있는 것올 XRD -scan으로 관찰하였다. 또한 GaN 충의 성장이 진행됩에 따라 결정성이 향상되고 있는 것이 뼈S ali맹ed channeling 실험올 통해 관찰되었으며 이는 G GaN 충의 두께 중가에 따라 결정성이 향상된다는 것올 의미한다 사파이어 기판의 질 화 처 리 시 간이 증가함에 따라 후속 성 장된 GaN 층의 bas외 pI뻐e에 대 한 XRD -rocking c curve의 반치폭이 감소하는 것으로 나타났는데 이는 기판의 표면이 질화 충으로 전환 됨에 따라 각 GaN island의 c-축이 잘 정렬됨올 의미한다. 또한 AFM으로 ~이 충의 표 면 형상올 관찰한 결과 기판의 질화 처리가 선행될 경우 lateral 방향으로의 G뼈 충의 성장이 촉진되어 큰 islands로 성장이 일어나는 것으로 관찰되었는데 이는 질화 처리가 선행될 경우 Ga과 N의 표면 확산에 대한 활성화 에너지가 감소되기 때문인 것으로 생 각된다 일반적으로 GaN 에피택시 충의 결정성의 향상과 lateral 생장올 도모하기 위하여 성장 온도를 증가시키지만 본 실험에서는 낮은 성장 온도에서도 결정성의 향상 및 l later빼 성장을 촉진시킬 수 있었으며 이는 저온 성장법에 의한 고품위의 GaN 에피택시 충 성장에 대한 가능성올 제시하는 것이다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.784-787
• /
• 2002

We prepared the PLT(28) thin film by using sol-gel method and investigated the structure and electrical properties of the film. With the XRD and AFM analyses, it is found that PLT(28) thin film annealed at 6sot has a complete perovskite structure and its surface roughness is about 22$\AA$. We prepared PLT(28) thin film on the Pt/TiO$_{x}$SiO$_2$/Si substrate, in which the specimen has a planar capacitor structure, and analyzed the electrical properties of PLT(28) thin film. In result, PLT(28) thin film has a paraelectric phase and its dielectric constant and loss tangent at 10kHz are 761 and 0.024, respectively. Also, the storage charge density and leakage current density of PLT(28) thin film at W are 134fC/$\mu$m2 and 1.01 $\mu$A/cm2, respectively. As a result of this, we concluded that the PLT(28) thin film is a promising material to be used as a capacitor dielectrics for next generation DRAM.M.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.497-502
• /
• 2019

Metal oxide nanostructures are promising materials for advanced applications, such as high sensitive gas sensors, and high capacitance lithium-ion batteries. In this study, tin oxide (SnO) nanostructures were grown on a Si wafer substrate using a two-zone horizontal furnace system for a various substrate temperatures. The raw material of tin dioxide ($SnO_2$) powder was vaporized at $1070^{\circ}C$ in an alumina crucible. High purity Ar gas, as a carrier gas, was flown with a flow rate of 1000 standard cubic centimeters per minute. The SnO nanostructures were grown on a Si substrate at $350{\sim}450^{\circ}C$ under 545 Pa for 30 minutes. The surface morphology of the as-grown SnO nanostructures on Si substrate was characterized by field-emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM). Raman spectroscopy was used to confirm the phase of the as-grown SnO nanostructures. As the results, the as-grown tin oxide nanostructures exhibited a pure tin monoxide phase. As the substrate temperature was increased from $350^{\circ}C$ to $424^{\circ}C$, the thickness and grain size of the SnO nanostructures were increased. The SnO nanostructures grown at $450^{\circ}C$ exhibited complex polycrystalline structures, whereas the SnO nanostructures grown at $350^{\circ}C$ to $424^{\circ}C$ exhibited simple grain structures parallel to the substrate.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.2
• /
• pp.156-161
• /
• 2007

This paper describes the characteristics of polycrystalline ${\beta}$ or 3C (cubic)-SiC (silicon carbide) thin films heteroepitaxailly grown on Si wafers with thermal oxide. In this work, the poly 3C-SiC film was deposited by APCVD (atmospheric pressure chemical vapor deposition) method using HMDS (hexamethyildisilane: $Si_{2}(CH_{3}_{6})$ single precursor. The deposition was performed under various conditions to determine the optimized growth conditions. The crystallinity of the 3C-SiC thin film was analyzed by XPS (X-ray photoelectron spectroscopy), XRD (X-ray diffraction) and FT-IR (fourier transform-infrared spectometers), respectively. The surface morphology was also observed by AFM (atomic force microscopy) and voids or dislocations between SiC and $SiO_{2}$ were measured by SEM (scanning electron microscope). Finally, depth profiling was invesigated by GDS (glow discharge spectrometer) for component ratios analysis of Si and C according to the grown 3C-SiC film thickness. From these results, the grown poly 3C-SiC thin film is very good crystalline quality, surface like mirror and low defect. Therfore, the poly 3C-SiC thin film is suitable for extreme environment, Bio and RF MEMS applications in conjunction with Si micromaching.