• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.2
• /
• pp.106-113
• /
• 2011

This paper was conducted on experimental analysis in the free vibration analysis of rectangular plates under uniform thermal loading. Materials of three rectangular plates were aluminum, steel and stainless-steel respectively. The dimension of rectangular plates was 0.1 $\times$ 0.1 $\times$ 0.002 m. Infrared quartz lamps were used for thermal loading. The PCS(Power Control System) electric control system was applied for control and scanning vibrometer (Poly Tech) was used for acquisition of frequency response function. Applied temperature was increased from room temperature to $300^{\circ}C$ by $50^{\circ}C$. Boundary condition was free-free condition using bungee cord. Front face of rectangular plate was heated uniformly.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.5
• /
• pp.801-804
• /
• 2006

[ $GdAlO_3(GAO)$ ] buffer layer for $YBa_2Cu_3O_{7-{\delta}}(YBCO)$ coated superconductor wire was fabricated by sol-gel processing. Precursor solution was prepared by dissolving 1:1 stoichiometric quantaties of gadolinium nitrate hexahydrate and aluminum nitrate nonahydrate in methanol. The solution was spin-coated on $SrTiO_3(STO)$(100) single crystal substrates and heated at $1000^{\circ}C$ for 2h in wet $N_2-5%\; H_2$, atmosphere. A SEM(scanning electron microscopy) observation of the surface morphology of the GAO layer has shown that it has a faceted morphology indicating epitaxy. It was shown from x-ray diffraction(XRB) that GAO buffer layer was highly c-axis oriented epitaxial thin film with both good out-of-plane($FWHM=0.29^{\circ}$ for the (002) reflection) and in-plane ($FWHM=1.10^{\circ}$ for the {112} reflection) alignment.

• Journal of the Korean Vacuum Society
• /
• v.15 no.6
• /
• pp.619-623
• /
• 2006

The most important factor which determines resonance characteristics of FBAR(Film Bulk Acoustic Resonator) is the piezoelectricity of piezoelectric film. The piezoelectric properties of ZnO thin films which is strong as FBAR piezoelectric film is determined by the degree of c-axis preferred orientation with (002) plan. Therefore, many researchers have been interested in the study on the preferred orientation of the piezoelectric thin film. This paper has studied the preferred orientation of ZnO piezoelectric thin films using the helped seed layer of ZnO. The result shows that the c-axis ZnO thin films with columnar grains that the value of standard $deviation(\sigma)$ of XRD rocking curve is of $\sigma=1.15^{\circ}$ have the excellent piezoelectric property.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.91-91
• /
• 2010

현재 나노크기의 나노소자에 대한 관심과 연구가 활발히 진행 중에 있고, 나노소자 제작을 위한 나노구조체 연구에도 탄력을 받고 있다. 나노구조체 연구 중에서도 탄소나노튜브(CNT)와 실리콘이 많이 연구되고 있으나 CNT의 경우 금속과 반도체 등 전기적 특성이 혼재되어 분리기술이 필요하며, 실리콘 기반의 나노구조체들은 공기 중에 노출되었을 경우 자연 산화막 생성에 대한 문제점들이 대두되고 있다. 이러한 기존 나노구조체들의 문제점들을 극복하기 위해 산화물 계열의($InO_3$, ZnO와 $SnO_2$ 등) 나노구조체들이 화학, 광학 및 생화학 센서등의 다양한 응용 연구들이 진행되고 있다. 본 연구에서는 thermal evaporation법으로 tube furnace 장비를 이용하여 온도($500{\sim}900^{\circ}C$)변화에 따른 ZnO nanorod를 성장시켰다. 성장된 ZnO nanorod의 구조적 특성을 확인하기 위하여 전계방출주사전자현미경(SEM)을 측정한 결과 ZnO nanorod들은 직경 50~80nm, 길이는 400~1000nm 이상까지 다양한 직경과 길이를 가지고 성장되었으며 $800^{\circ}C$ 에서 성장된 ZnO nanorod가 가장 곧고 이상적인 nanorod의 형태를 이루는 것을 확인할 수 있었다. Nanorod는 온도가 높아질수록 nanowire로 성장됨에 따라 본 연구에서 $800^{\circ}C$ 에서는 nanorod형태를 이루고 있으나 $900^{\circ}C$에서부터 nanowire의 형태로 성장되었다. 또한 성장된 ZnO nanorod들의 X-선 회절패턴(XRD)을 측정 결과 ZnO의 (002) 우선 배양성 때문에 성장된 nanorod 또한 (002) 방향으로 성장되었음을 확인하였다. 이 연구를 통하여 온도를 조절함으로서 ZnO nanorod의 성장제어가 가능함을 확인하였고, 특성 분석을 통하여 발광소자, Solar Cell로의 응용가능성을 확인하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.989-999
• /
• 2014

The purpose of this study was to identify the influencing health promoting behavior of perceived health status and self-efficacy according to major of college students to develop health promoting interventions of college students. The subjects of this study were 592 college students in C city in Korea. Health promoting behavior was significantly higher(p=.014) in health related major students than none health related major students. There were significantly difference in "an time to school(p=.007)", "sleeping hours(p=.004)", "drinking(p=0.028)", "exercise(p<.001)", "exercise frequency(p=.012)" between health related major and none health related major. perceived health status(r=0.381, p<.001) and self efficacy(r=0.620, p<.001) were significantly positive relation to health promoting behavior. The other sub factor in self efficacy were confidence(p<.001), effort(p=.008), will(p=.001) and sub factor in perceived health status were present health(p<.001), health anxiety(p=.002), resistibility and sensitivity(p=.002) in none health related major students($R^2$=0.432, F=38.620). We suggested that the results of this study be considered in developing health promoting programs through appropriate education and various activity of young adults.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2015.09a
• /
• pp.96-99
• /
• 2015

Norwegian Continental Shelf(NCS) is known as rich oil & gas reservoir and takes one third(1/3) of total continental shelf of Europe.(As of year 2013, Norway ranked third in the world in terms of exporting natural gas.) Until recent low oil price stream, development of oil & gas in NCS was active and perceived as profitable business. This paper describes study of living quarter fire protection for PSA AoC to prepare for likely increasing demands of offshore projects in NCS field.

• Composites Research
• /
• v.36 no.3
• /
• pp.167-172
• /
• 2023

The manufacturing technology of composite material is applicable with filler characteristics maintaining low cost, flexibility, and easy process to develope the various functional composite materials. To realize functional composites, various researches on the high performance of composite materials using graphene as a filler is being actively conducted. In this study, physical and chemical properties were investigated using graphene to improve high functional properties. Graphene oxide (GO) was prepared using graphane nanoplatelet (GNP), and reduced graphene oxide (R-GO) was formed by reducing GO. The physical properties of GO and R-GO were analyzed, and the reliability of the manufactured method was reviewed by comparing that of GNP results. As a result of analysis by Raman spectroscopy, in the case of R-GO, it was confirmed that the intensity of D-peak and G-peak decreased compared to GO, and an increase of 0.08 was observed through the ratio of ID/IG. For the FTIR results, GO and RGO has a repeating C-C and C=C connection structure unlike GNP. GO and R-GO show clear peaks for C-O bond, C=C bond, C=O bond, and O-H bonding. As a result of X-ray diffraction analysis, GNP showed a wide diffraction peak at 25.86° of (002) plane characteristics, whereas GO and R-GO showed peaks corresponding to (001) and (100) planes. It was also found that the interlayer distance of GO increased by about 2.6 times compared to GNP.

• Journal of the Korean Ceramic Society
• /
• v.41 no.10 s.269
• /
• pp.742-748
• /
• 2004

Isopropanol of low boiling point was used as a solvent to prepare Al-doped ZnO(AZO) thin films. A homogeneous and stable sol was made from Zn acetate a solute whose mole concentration was 0.7mol/$\iota$ and Al chloride as a dopant. Al-doped ZnO thin films were prepared by sol-gel method as a function of post-heating temperature from 500 to $700^{\circ}C$ and the optical and electrical properties were investigated. The c-axis orientation along (002) plane was enhanced with the increasing of post-heating temperature and the surface morphology of the films showed a homogeneous and nano-sized microstructure. The optical transmittance of the films post-heated below $650^{\circ}C$ was over $86\%$, but decreased at $700^{\circ}C$. The electrical resistivity of the thin films decreased from 73 to 22 $\Omega$-cm as the post-heating temperature increased up to $650^{\circ}C$, but increased greatly to 580 $\Omega$-cm at $700^{\circ}C$. XPS analysis indicated that the deterioration of electrical and optical properties was attributed to the precipitation of $Al_2O_3$ phase on the surface of AZO thin film. This result suggests that the optimum post-heating temperature to improve electrical and optical properties is $600^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.41 no.2
• /
• pp.136-142
• /
• 2004

A homogeneous and stable ZnO sol was prepared by dissolving the zinc acetate dihydrate(Zn(CH$_3$COO)$_2$$.$2H$_2$O) in solution of isopropanol((CH$_3$)$_2$$.$CHOH) and monoethanolamine(MEA:H$_2$NCH$_2$CH$_2$OH). ZnO thin films were prepared by sol-gel spin-coating method and investigated for c-axis preferred orientation and physical properties with preheating temperature. The c-axis growth had a difference as increaing preheating temperature. ZnO thin film preheated at 275$^{\circ}C$ and post-heated at 650$^{\circ}C$ was highly oriented along the (002) plane. After preheating at 200∼300$^{\circ}C$ and post-heating at 650$^{\circ}C$, the transmittance of ZnO thin films by UV-vis. measurement was over 85% in visible range and exhibited absorption edges at about 370 nm. The optical band gap energy was obtained about 3.22 eV, The photoluminescence emission characteristics of ZnO thin film preheated at 275$^{\circ}C$ and post-heated at 650$^{\circ}C$ was found to orange emission(620 nm, 2.0 eV) by PL measurement, which revealed the possibility for application of inorganic photoluminescence device.

• Journal of the Korean Vacuum Society
• /
• v.20 no.3
• /
• pp.211-216
• /
• 2011

In this study, the effects of growth temperature on structural and optical properties of hydrothermally grown ZnO nanorod arrays have been investigated. Zinc nitrate ($Zn(NO_3)_2$) and hexamethylenetetramine were used as precursors. The ZnO buffered Si(100) with a thickness of 40 nm was used as the substrates. The ZnO nanorods were grown on these substrates with the temperature ranging from 55 to $115^{\circ}C$. The results were characterized by scanning electron microscope, X-ray diffraction and room temperature photoluminescence measurements. Well-aligned ZnO nanorods arrays were obtained from all samples. The tips of nanorods were flat when the temperature was less than $95^{\circ}C$, and the sharp-tip nanoneedle-like morphologies were obtained with the temperature of $115^{\circ}C$. In addition, some bundles were on the nanorods arrays with $115^{\circ}C$ due to the non-equilibrium growth. The growth temperature could affect the crystal and optical properties of ZnO. For the effects on crystal properties, the intensity of (002) peak was increased as the temperature was increased to $75^{\circ}C$, then decreased as the temperature was further increased to $115^{\circ}C$. As for the effects on optical properties, the intensity ratio of UV peak to visible peak is increased with the temperature increasing and the strongest UV peak intensity was obtained with the growth temperature of $95^{\circ}C$.