• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.1
• /
• pp.87-92
• /
• 1998

Major characteristics of shrinking and rehydration of Korean tea-leaves were investigated in the hot-air drying equipment. Experiments were performed with various drying temperature, plucking time, heating method and rolling condition. The values of shrinking raito and rate were the highest at 7$0^{\circ}C$ in the range of 3$0^{\circ}C$ to 9$0^{\circ}C$. The 1st tea-leaves and showed higher values. Shrinking ratio was 16.62 and 19.62% for leaves and stems; shrinking rate was found 0.083 and 0.091cm/hr.cm, respectively. The rehydration characteristics of tea-leaves at the drying temperature of 3$0^{\circ}C$ were fairly satisfactory. The 2nd tea-leaves showed higher value than others, while the natural tea-leaves were lower. Average rehydration ratio and rehydration rate constant were 85.7% and 0.063/min for leaves; 80.1% and 0.032/min for stems, respectively.

• Journal of Magnetics
• /
• v.7 no.1
• /
• pp.21-23
• /
• 2002

The magnetoimpedance of $Fe_{91.5-x}Zr_7B_xCu_1Al_{0.5}$alloys has been measured to investigate the influence of structural changes in the nanocrystallization process after thermal treatment. Annealing was performed at temperatures of $350^\circ{C}$, $450^\circ{C}$, and $550^\circ{C}$ for 1 hour in a vacuum. Ultra soft magnetic behavior was observed in the samples annealed at $550^\circ{C}$. The magnetoimpedance ratio and the longitudinal permeability ratio coincided with the softness of the magnetic properties of the thermally treated samples.

• Journal of Nutrition and Health
• /
• v.38 no.4
• /
• pp.297-306
• /
• 2005

It is known that dehydroepiandrosterone (DHEA) shows a dual effect, prooxidant or antioxidant, depending on the do-sage or physiological status of animals. The purpose of this study was to determine the effects of DHEA administration at low dose on lipid peroxidation, protein carbonylation and fatty acid composition in liver. Sprague Dawley male rats were fed either com oil diet containing $15\%$ com oil or fish oil diet containing $2\%$ corn oil + $13\%$ sardine oil, with or without $0.2\%$ DHEA for 9 weeks. Atherogenic index and hepatic triglyceride and cholesterol levels were significantly reduced by DHEA administration in rats fed with fish oil diet. Hepatic lipid peroxide product (TBARS) and protein carbonyl levels were significantly higher in rats fed with fish oil diet than in rats fed with corn oil diet. However, DHEA administration significantly reduced the hepatic thiobarbituric acid-reactive substance (TBARS) and conjugated diene levels in rats fed with fish oil diet. Contents of C16 : 0, C16 : 1, C20 : 5 and C22 : 6 in hepatic microsome were higher in rats fed with fish oil diet than in rats fed with corn oil diet, and contents of C18 : 2 and C20 : 4 were lower than in rats fed with com oil diet. DHEA administration significantly increased C16 : 0 and C18 : 3 contents and reduced C18 : 2 content in rats fed with com oil diet, while it increased C16 : 0 and C18 : 1 and reduced C20 : 5 and C22 : 6 in rats fed with fish oil diet. On overall, DHEA administration increased saturated fatty acid (SFA) and reduced polyunsaturated fatty acid (PUFA) in hepatic microsome, thereby PUFA/SFA ratio was significantly (p < 0.0001) reduced without the change of n-3/n-6 ratio. Taken together, low dose of DHEA administration lowered PUFA/SFA ratio in hepatic microsomal membranes and also showed antioxidative effect especially in fish oil-induced highly oxidative stress condition through blocking increases of C20 : 5 and C22 : 6 contents.

• Journal of the Korean Ceramic Society
• /
• v.42 no.1
• /
• pp.16-21
• /
• 2005

The effect of additive composition, using AlN and $Er_{2}O_{3}$ as sintering additives, on the mechanical properties of liquid-phase-sintered, and subsequently annealed SiC ceramics was investigated. The microstructures developed were quantitatively analyzed by image analysis. The average thickness of SiC grains increased with increasing the $Er_{2}O_{3}/(AlN + Er_{2}O_{3})$ ratio in the additives whereas the aspect ratio decreased with increasing the ratio. The mechanical properties versus $Er_{2}O_{3}/(AlN + Er_{2}O_{3})$ ratio curve had a maximum; i.e., there was a small composition range at which optimum mechanical properties were realized. The best results were obtained when the ratio ranged from 0.4 to 0.6. The flexural strength and fracture toughness of the SiC ceramics were $550\~650\;MPa$ and $5.5\~6.5$ MPa${\cdot}m^{1/2}$, respectively.

• Journal of the Korean Ceramic Society
• /
• v.31 no.10
• /
• pp.1176-1180
• /
• 1994

The sliding wear behavior of the plasma-sprayed zirconia containing 3 mol% yttria was investigated after the annealing at room temperature to 80$0^{\circ}C$ in various concentrations of humid atmosphere as laboratory, humid, dry argon atmosphere. Both of the friction coefficient and the wear loss increased with increasing temperature up to 80$0^{\circ}C$. Surface morphology of the worn samples changed with annealing temperature. The change of monoclinic/tetragonal (m/t) x-ray peak intensity ratio effected the wear behavior. The m/t ratio had maximum value at 20$0^{\circ}C$ and decreased with increased temperature in laboratory and humid atmosphere. In argon atmosphere the m/t ratio had no maximum value and decreased with increasing temperature. At all the annealing temperature humid atmosphere had more the m/t ratio value than any other atmosphere. The change of toughness was showed the inversed result of m/t ratio change. The results indicated that the resudial stress which was induced by the different amount of phase transformation takes a detrimental role in wear behavior.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.8
• /
• pp.1051-1056
• /
• 2006

Response surface methodology was used to investigate the quality of clarified mixed apple and carrot juices using ultrafitration. Apple and carrot juices were blended at the ratio of 1:3, 1:1, and 3:1. A three-variable, three-level central composite design was employed where the independent variables were the blend ratio, temperature and average transmembrane pressure (ATP). With increasing temperature and pressure, flux linearly increased regardless of blending ratio. Blend juice with 75% apple showed the highest soluble sugar and total sugar content in apple and carrot blend juices. Soluble solid contents were more affected by blending ratio than temperature and ATP. Total sugar contents were greatly affected by temperature; increasing temperature led to higher total sugar content up to $25^{\circ}C$. Higher carrot ratio led to higher vitamin C content. In general, higher acidity was achieved by higher apple content and acidity was increased with increasing temperature. Turbidity increased for all samples as APT increased, with the blending ratio of 1:1 (apple:carrot) showing the highest turbidity. Viscosity was greatly changed in the blending ratio of 3:1 (apple:carrot) juice. The polynomial models developed by RSM were satisfactory to describe the relationships between the studied factors and the responses. Analytical optimization gave $flux=0.216\;L/m^2.h$, soluble $solids=10.39^{\circ}Brix$, total sugar=71.32 mg/mL, vitamin C=315.18 mg%, acidity=7.78 mL, turbidity=0.017, and viscosity=1.44 cp, when using a $temperature=44.97^{\circ}C$, ATP=113.57 kPa, and blend ratio=28.50%.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.1 no.2
• /
• pp.57-61
• /
• 1987

The characteristis of all the instruments and materials used in atomic industry are changed due to irradiation damages by the effects of radiation activities. In this study when R-C series-parallel circuits are irradiated by $\gamma$-ray, variations in its electrical properties have been investigated. The following results are obtained. 1) In the R-C series circuit, the impedance variation ratio is increased as the irradiation quantity is increased up to $10^6[r]$, and above $10^6[r]$, the impedance variation ratio reached at the saturated condition. In the saturated condition, the increasing value was about 1.25 (%). 2) In the R-C series circuit, the power factor variation ratio is decreased as the irradiation quantity is in creased up to $10^6[r]$, and above $10^6[r]$, the power factor variation ratio reached at the saturated condition. In the saturated condition, the decreasing value was about 0.5(%). 3) In the R-C parallel circuit, the impedance variation ratio is increased as the irradiation quentity is increased up to $10^6[r]$, and above $10^6[r]$, the impedance variation reached at the saturated condition. In the saturated condition, the increasing value was about 0.5.(%). 4) In the R-C parallel circuit, the power factor variation ratio is decreased as the irradiation quantity is increased up to $10^6$[r], and above $10^6$[r], the power factor variation ratio reached at the saturated condition. In the saturated condition, the decreasing value was about 1.3(%).

• Journal of Korean Society on Water Environment
• /
• v.23 no.3
• /
• pp.367-370
• /
• 2007

Numerous sets of simulation were conducted in order to find out the optimum operational conditions of the existing BNR process using GPS-X program. The model of ASM3 and modified Bio-P module were applied for simulations. From the result of this study, effluent quality was closely related with the step feeding rate and influent C/N ratio. The effluent TN concentration seemed to be significantly affected by step feeding rate at the low C/N condition. But at the high C/N condition, the effluent concentration of TP rather than that of TN was affected by the control of step feeding rate.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.10a
• /
• pp.87-92
• /
• 1994

The main objective of this study is to determine the critical chloride ion concentrations in the pore solutions causing depassivation of steel reinforcement in concrete made with cements of different $C_3A$ contents. Cement pastes with water-ratio of 0.5 were prepared using four cements with $C_3A$ contents of 0.46, 5.97, 9.14, and 9.65 percent. The pastes were allowed to hydrate in sealed containers for 28days and then objected to pore solution expression. The expressed pore fluids were analyzed for chloride and hydroxyl ion concentrations. It was found that the free cholride concentration in the pore solution decreases significantly with an increase in the $C_3A$ content of the cement. With increasing level of chloride addition, although the alsolute amount of bound chloride increase, the ratio of bound to total chlorides decreases.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.6
• /
• pp.5-10
• /
• 2012

The effect of pressure-side opening length on three-dimensional flow fields and aerodynamic losses downstream of a cavity squealer tip has been investigated in a turbine rotor cascade for the squealer rim height-to-chord ratio and tip gap height-tochord ratio of $h_{st}/c$ = 5.05% and h/c = 2.0% respectively. The opening length-to-camber ratio is changed to be $OL/c_c$ = 0.0, 0.1, 0.2, 0.3, 0.4, 0.5, and 0.7 The results show that longer OL leads not only to weaker secondary flow but also to lower aerodynamic loss in the tip leakage vortex region, while it significantly widens the area with high aerodynamic loss in the passage vortex region. The aerodynamic loss coefficient mass-averaged all over the measurement plane is kept almost constant for $0.0{\leq}OL/c_c{\leq}0.3$, whereas it increases rapidly for $OL/c_c$ > 0.3 in proportion to $OL/c_c$. There is little deterioration in flow turning with increasing $OL/c_c$.