Browse > Article
http://dx.doi.org/10.4191/KCERS.2005.42.1.016

Effect of Additive Composition on Mechanical Properties of Silicon Carbide Sintered with Aluminum Nitride and Erbium Oxide  

Lee, Sung-Hee (Department of Materials Science and Engineering, The University of Seoul)
Kim, Young-Wook (Department of Materials Science and Engineering, The University of Seoul)
Publication Information
Abstract
The effect of additive composition, using AlN and $Er_{2}O_{3}$ as sintering additives, on the mechanical properties of liquid-phase-sintered, and subsequently annealed SiC ceramics was investigated. The microstructures developed were quantitatively analyzed by image analysis. The average thickness of SiC grains increased with increasing the $Er_{2}O_{3}/(AlN + Er_{2}O_{3})$ ratio in the additives whereas the aspect ratio decreased with increasing the ratio. The mechanical properties versus $Er_{2}O_{3}/(AlN + Er_{2}O_{3})$ ratio curve had a maximum; i.e., there was a small composition range at which optimum mechanical properties were realized. The best results were obtained when the ratio ranged from 0.4 to 0.6. The flexural strength and fracture toughness of the SiC ceramics were $550\~650\;MPa$ and $5.5\~6.5$ MPa${\cdot}m^{1/2}$, respectively.
Keywords
Silicon carbide; Mechanical properties; Aluminum nitride;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 S. Guo, N. Hirosaki, H. Tanaka, Y. Yamamoto, and T. Nishimura, 'Oxidation Behavior of Liquid-Phase Sintered SiC with AlN and $Er_2O_3$ Additives between 1200$^{\circ}C$ and 1400$^{\circ}C$,' J. Eur. Ceram. Soc., 23 [12] 2023-29 (2003)   DOI   ScienceOn
2 R. A. Culter and T. B. Jackson, 'Liquid Phase Sintered Silicon Carbide,' pp. 309-18, in Ceramic Materials and Components for Engines, Proceedings of the Third International Symposium edited by V. J. Tennery. The American Ceramic Society, Westerville, OH, 1989
3 Y. I. Lee and Y.-W. Kim, 'Microstructure and Mechanical Properties of SiC-BN Composites with Oxynitride Glass,' J. Kor. Ceram. Soc., 40 [3] 229-33 (2003)   DOI   ScienceOn
4 N. P. Padture, 'In Situ-Toughened Silicon Carbide,' J. Am. Ceram. Soc., 77 519-23 (1994)   DOI   ScienceOn
5 D. Chen, M. E. Sixta, X. F. Zhang, L. C. De Jonghe, and R. O. Ritchie, 'Role of the Grain-Boundary Phase on the Elevated-Temperature Strength, Toughness, Fatigue, and Creep Resistance of Silicon Carbide Sintered with Al, B, and C,' Acta Mater., 48 4599-608 (2000)   DOI   ScienceOn
6 G. Rixecker, I. Wiedmann, A. Rosinus, and F. Aldinger, 'High-Temperature Effects in the Fracture Mechanical Behavior of Silicon Carbide Liquid-Phase Sintered with AlN-$Y_2O_3$ Additives,' J. Eur. Ceram. Soc., 21 1013-19 (2001)   DOI   ScienceOn
7 M. A. Mulla and V. D. Krstic, 'Pressrueless Sintering of $\beta$-SiC with $Al_2O_3$ Additions,' J. Mater. Sci., 29, 934-38 (1994)   DOI   ScienceOn
8 S. H. Kim, Y.-W. Kim, J. Y. Yoon, and H. D. Kim, 'Fabrication of Porous SiC Ceramics by Partial Sintering and their Properties,' J. Kor. Ceram. Soc., 41 [7] 541-47 (2004)   DOI   ScienceOn
9 J. Y Kim, Y.-W. Kim, M. Mitomo, G. D. Zhan, and J. G. Lee, 'Microstructure and Mechanical Properties of $\alpha$-SiC Sintered with Yttrium-Garnet and Silica,' J. Am. Ceram. Soc., 82 441-44 (1999)   DOI   ScienceOn
10 Y. Zhou, K. Hirao, Y Yamauchi, and S. Kanzaki, 'Tailoring the Mechanical Properties of Silicon Carbide Ceramics by Modification of the Intergranular Phase Chemistry and Microstructure,' J. Eur. Ceram. Soc., 22 2689-96 (2002)   DOI   ScienceOn
11 Y. J. Jin, Y.-W. Kim, and M. Mitomo, 'Effect of Large Seeds Addition on Microstructural Development of SiC Sintered with Oxynitride Glass,' J. Mater. Sci. Lett., 21 1015-17 (2002)   DOI   ScienceOn
12 Y Tajima, 'Developemnt of High Performance Silicon Nitride Ceramics and their Applications,' Mat. Res. Soc. Proc., 287 189-96 (1993)
13 P. F. Becher, E. Y. Sun, C.-H. Hsueh, K. B. Alexander, S.-L. Hwang, S. B. Waters, and C. G. Westmoreland, 'Debonding of Interfaces between Beta-Silicon Nitride Whiskers and Si-Al-Y Oxynitride Glasses,' Acta Mater., 10 3881-93 (1996)
14 E. Y. Sun, P. F. Becher, K. P. Plucknett, C.-H. Hsuch, K. B. Alexander, S. B. Waters, K. Hirao, and M. E. Brito, 'Microstructural Design of Silicon Nitride with Improved Fracture Toughness: II, Effects of Yttria and Alumina Additives,' J. Am. Ceram. Soc., 81 [11] 2831-71 (1998)   DOI
15 S. Prochazka, 'The Role of Boron and Carbon in the Sintering of Silicon Carbide,' in Special Ceramics, Vol. 6, Ed. by P. Popper(Manchester: The British Ceramic Research Association, pp. 171-78, 1975
16 Y.-W. Kim, M. Mitomo, H. Emoto, and J. G. Lee, 'Effect of Initial $\alpha$-Phase Content on Microstructure and Mechanical Properties ofSintered Silicon Carbide,' J. Am. Ceram. Soc., 81 3136-40 (1998)   DOI   ScienceOn
17 J. Y. Kim, Y.-W. Kim, J. G. Lee, and K. S. Cho, 'Effect of Annealing on Mechanical Properties of Self-Reinforced Alpha-Silicon Carbide,' J. Mater. Sci., 34 2325-30 (1999)   DOI   ScienceOn
18 Y.-W. Kim, K. Ando, and M. C. Chu, 'Crack-Healing Behavior of Liquid-Phase-Sintered Silicon Carbide Ceramics,' J. Am. Ceram. Soc., 86, 465-70 (2003)   DOI   ScienceOn
19 E. J. Winn and W. J. Clegg, 'Role of the Powder Bed in the Densification of Silicon Carbide Sintered with Yttria and Alumina Additives,' J. Am. Ceram. Soc., 82 [12] 3466-536 (1999)   DOI   ScienceOn
20 S. G. Lee, Y-W. Kim, and M. Mitomo, 'Relationship between Microstructure and Fracture Toughness of Toughened Silicon Carbide,' J. Am. Ceram. Soc., 84 1347-53 (2001)   DOI   ScienceOn
21 D. Foster and D. P. Thompson, 'The Use of MgO as a Densification Aid for $\alpha$-SiC,' J. Eur. Ceram. Soc., 19 2823-31 (1999)   DOI   ScienceOn
22 M. Keppeler, H. G. Reichert, J. M. Broadley, G. Thurn, I. Weidmann, and F. Aldinger, 'High Temperature Mechanical Behaviour of Liquid Phase Sintered Silicon Carbide,' J. Europ. Ceram. Soc., 18 [5] 521-26 (1998)   DOI   ScienceOn
23 S. H. Kim, Y.-W. Kim, and M. Mitomo, 'Microstructure and Fracture Toughness of Liquid-Phase-Sintered $\beta$-SiC Containing $\beta$-SiC Whiskers as Seeds,' J. Mater. Sci., 38 1117-21 (2003)   DOI   ScienceOn
24 L. S. Sigl and H. J. Kleebe, 'Core/Rim Structure of Liquid-Phase-Sintered Silicon Carbide,' J. Am. Ceram. Soc., 76 773-76 (1993)   DOI   ScienceOn
25 Z. Chen, 'Effects of Gadolinia and Alumina Addition on the Densification and Toughening of Silicon Carbide,' J. Am. Ceram. Soc., 79, 530-32 (1996)   DOI
26 Y.-W. Kim, M. Mitomo, and T. Nishimura, 'Heat-Resistant SiC with Aluminum Nitride and Erbium Oxide,' J. Am. Ceram. Soc., 84 2060-64 (2001)   DOI   ScienceOn
27 G. R. Anstis, P. Chantikul, B. R. Lawn, and D. B. Marshall, 'A Critical Evalution of Indentation Techniques for Measuring Fracture Toughness,' J. Am. Ceram. Soc., 64 533-38 (1981)   DOI
28 S. S. Shinozaki, 'Unique Microstructural Development in SiC Materials with High Fracture Toughness,' MRS Bull., 20 42-5 (1995)
29 Y.-W. Kim, M. Mitomo, and H. Hirotsuru, 'Microstructural Development of Silicon Carbide Containing Large Seed Grains,' J. Am. Ceram. Soc., 80 99-105 (1997)   DOI   ScienceOn