• 한국표면공학회지
• /
• 제21권2호
• /
• pp.53-67
• /
• 1988

The high temperature corrosion of Fe-C alloys were studied at I atm SO gas in the temperature range 500~80$0^{\circ}C$ by means of a thermogravimetric analysis. The Na2SO4 induced high tempwrature corrosion rate was also measured at atm O2 gas under above the temperature renge. The reaction products were identified with the aid of X-ray diffraction technique, and micostruction of the alloy/scale interface was observed with a optical microscope and SEM. The experimental results were disussed by the themodeynamic calcutions. Under above the experimental condition. the reaction rates decrbon with increasing carbon content. The transfer of Fe ion was limited by a residue of carbon precipitated at alloy scale interface due to the oxidation of Fe-C alloys at alloy surface. The effect of cold working on reaction rate was different between the Fe containing low carbon and Fe-C Alloy containing carbon above 0,73 wt%. In a cold worked iron containing low carbon content, the crystallization of metal surface leads to the poor adherence between the alloy and the cavity formed between the alloy and scale. The outward diffusion of ion through the scale is estimated to be hindered by the cavity formed between the scale, consequently decreasing reaction rate. In the case Fe-C containing carbon above 0.73 Wt% alloy, the reaction rate was little affected by cold working, because the effect of content on reaction rats is greater than the effect of cold working.

• Elastomers and Composites
• /
• 제39권4호
• /
• pp.281-285
• /
• 2004

이 연구는 열분석법을 이용하여 간단하게 자유 라디칼 중합의 활성화 에너지를 결정하는 방법을 부틸 아크릴레이트을 모델로 하여 구했다. 활성화 에너지는 Kissinger, Osawa 및 half-width법인 다수의 주사 속도법 (multiple scanning-rate method)을 이용하여 $1^{\circ}C/min,\;2^{\circ}C/min,\;5^{\circ}C/min$, 그리고 $10^{\circ}C/min$로 측정하였으며 단수 주사 속도법인 Barret 법을 이용하여 구하였다. 열분석법에 의해 구해진 중합반응의 활성화 에너지는 개시반응, 성장반응 및 종결반응의 각각의 활성화 에너지에서 계산된 전체 중합반응에서의 활성화 에너지와 가깝게 접근하였다.

• Bulletin of the Korean Chemical Society
• /
• 제17권3호
• /
• pp.262-268
• /
• 1996

Flow properties of all suspensions are controlled by their flow units. The factors effecting on the flow units are the characteristics of the particle itself (surface properties, particle sizes, particle shapes and etc.), the electrostatic interactions among the particles and the influences of the medium in the suspensions. Here, we studied the transition between the flow units with shear rate which can be added to the above factors. For the concentrated starch-water suspensions, by using the Couette type rotational viscometer, we confirmed that at low shear rate, dilatancy is appeared, but it is transformed to thixotropy with increasing shear rate. In order to explain this fact, we derived the following flow equation, representing the transition from dilatancy to thixotropy with shear rate, by assuming the equilibrium between the flow units. f = X1β1s./α1 + 1/(1+Kexp(c0s.2/RT))((1-X1)/α2)sinh-1{(β2)0 s. exp(c2s.2/RT)} + K exp(c0s.2/RT)/(1+K exp(c0s.2/RT))((1-X1)/α3)sinh-1{(β3)0 s. exp(-c3s.2/RT)} By applying this flow equation to the experimental flow curves for the concentrated starch-water suspensions, the flow parameters were obtained. And, by substituting the obtained flow parameters to the flow equation, the theoretical flow curves were reproduced. Also, Ostwald curve was represented by applying the flow equation, and the applicability for stress relaxation was discussed.

• 한국세라믹학회지
• /
• 제35권9호
• /
• pp.974-980
• /
• 1998

This study is concerned with the production of carbon fiber reinforced carbon(C/C) with polyaromatic mesophase pitch as matrix precursor and with the investigation of friction-wear characteristics in ambient air using a constant speed type of friction tester. The main problem in using the polyaromatic mesophase as the matrix precursor is the high viscosity which may limit the complete impregnation of the fiber preform in the vacuum. To solve these problems two dimensional carbon fiber fabrics were infiltrated with meso-phase pitch in the pitch impregnator. After the impregnation and the heat treatment process. C/C com-posites were characterized by density porosity to monitor the influence of high pressure and temperature. It showed that the bulk density was increased and the apparent porosity and the density increasing rate was reduced as repeating the impregnation the carbonization and the heat treatment. The friction-wear charac-teristics of C/C composites were investigated by measuring the average friction coefficient and the specific wear rate as functions friction speed and friction pressure using a constant speed type of friction tester. C/C composite4s showed the average friction coefficient to be reduced as increasing the friction speed and the friction pressure.

• Bulletin of the Korean Chemical Society
• /
• 제23권8호
• /
• pp.1149-1153
• /
• 2002

CH4/CO2 dry reforming was carried out to make syn gas on the Ni/Al2O3 catalysts calcined at different temperatures. The Ni/Al2O3 (850 $^{\circ}C)$ catalyst gave good activity and stability w hereas the Ni/Al2O3 $(450^{\circ}C)$ catalyst showed lower activity and stability. The NiO/Al2O3 catalyst calcined at $850^{\circ}C$ for 16 h (Ni/Al2O3 $(850^{\circ}C))$ formed the spinel structure of nickel aluminate, which was confirmed by TPR. The carbon formation rate on the Ni/Al2O3 $(850^{\circ}C)$ catalyst was very low till 20 h, and then steeply increased with reaction time without decreasing the activity for CH4 reforming. The Ni/Al2O3 $(450^{\circ}C)$ catalyst showed high carbon formation rate at the initial reaction time and then, the rate nearly stopped with continuous decreasing the activity for CH4 reforming. Even though the amount of carbon deposition on the Ni/Al2O3 $(850^{\circ}C)$ catalyst was higher than that on the Ni/Al2O3 $(450^{\circ}C)$ catalyst, the activity for CH4ing was also high, which could be attributed to the different type of the carbon formed on the catalyst surface.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.259-262
• /
• 1999

In this study, we investigated magnetic Properties of N $i_{0.2-x}$C $u_{x}$Z $n_{0.305}$F $e_{0.495}$ (x=0 ~0.2) ferrites. As the increased, the density and shrinkage increased until 5.3g/㎤, 20% respects, but the absorption decreased rate until 0.01%. As a results of the density, absorption rate, and shrinkage rate, the grain growth progressed rapidly in x=0.125 at 105$0^{\circ}C$, x=0.075 at 115$0^{\circ}C$, and x=0.025 at 115$0^{\circ}C$ for 3hours. As the CuO concentration increased, initial permeability increased at sintered 105$0^{\circ}C$ and 115$0^{\circ}C$ for 3 hours, but decreased at 125$0^{\circ}C$ for 3 hoers. The complex permeability as a function of frequency were high values at sintered 105$0^{\circ}C$ for 3 hours in x=0.005, 0.075.5.5.5.

• 대한금속재료학회지
• /
• 제47권7호
• /
• pp.391-396
• /
• 2009

Tensile, low cycle fatigue, and fatigue crack growth rate tests were conducted at RT and $300^{\circ}C$ for type 304 stainless steel. Tensile was tested under displacement control and low cycle fatigue was tested under strain control. Fatigue crack growth rate test was conducted under load control and crack was measured by DCPD method. Yield strength and elongation decreased at $300^{\circ}C$. Dynamic strain aging was not detected at $300^{\circ}C$. Low cycle fatigue life increased but fatigue strength decreased at $300^{\circ}C$. Fatigue crack growth rate increased at $300^{\circ}C$. Dislocation structures were mixed with cell and planar and did not change with temperature. Grain size did not change but plastic strain increased at $300^{\circ}C$. Strain induced martensite after low cycle fatigue test increased at RT but decreased at $300^{\circ}C$. It was concluded that the increase of low cycle fatigue life at $300^{\circ}C$ was due to the decrease of strain induced martensite at which crack was initiated.

• 한국표면공학회지
• /
• 제28권1호
• /
• pp.3-13
• /
• 1995

Electroless Ni and Cu platings were conducted on $B_4C$ and SiC. In the electroless Ni plating, the deposition rate on $B_4C$ was higher than on SiC. However, the electroless Cu deposition occured with high deposition rate regardless of the carbide substrates used in this study. Uniformity of the deposits was better in the electroless Cu deposition than in the electroless Ni deposition. In the topographies of the electroless depositions, Ni deposits have grown as colony, whereas Cu deposits have grown as fine individual grains.

• 약학회지
• /
• 제29권6호
• /
• pp.357-361
• /
• 1985

Two glycosides, assumed to be one of the potential active principles, is isolate from the root bark of Acanthopanax koreanu Nakai, identified to be acanthoside D, $C_{34}H_{46}O_{18}$, mp $242^{\circ}C$, and syringo side, $C_{17}H_{24}O_{9}$ mp $192^{\circ}C$. Acanthoside D has been found to have s-GPT, s-GOT lowering effect, BSP-retention rate and survival rate in the toxic state through the bio-pharmacological experiments.

• 한국수산과학회지
• /
• 제44권6호
• /
• pp.665-670
• /
• 2011

The rotifer Brachionus plicatilis is one of the most important food organisms in aquaculture. The resting eggs produced by mictic female rotifers are easily stored and hatched, making them useful as the starter for the mass culture of rotifers in marine larval culture. This study examined the optimum preservation method for resting eggs to ensure a high hatching rate. To produce resting eggs, the marine rotifer B. plicatilis was cultured with Nannochloris oculata (KMMCC 16). The resting eggs were harvested and cryopreserved using 5% and 10% methanol (MeOH), dimethylsulfoxide (DMSO), and glycerol as cryoprotectant agents (CPAs). The cryopreservation comprised slow or rapid freezing and the resting eggs were stored for one month in liquid nitrogen ($-196^{\circ}C$). The resting eggs were also dried at different temperatures (30, 40, and $50^{\circ}C$) and for different times (1, 2, and 3 h). In general, the hatching rates of the resting eggs preserved with CPA were higher than those without CPA and the slow freezing method was better than the rapid freezing method. However, the optimum CPA concentration for the hatching rate of the resting eggs varied with the freezing method and kind of CPA, and the CPA also affected the viability of the resting eggs. Dried resting eggs had a high, rapid hatching rate over 80%. The moisture content of the resting eggs cryopreserved in liquid nitrogen affected the hatching rate. Drying at $30^{\circ}C$ for 1 hour resulted in a high hatching rate of the resting eggs. In conclusion, drying at $30^{\circ}C$ for 1 hour and preservation in liquid nitrogen with the slow freezing method, without CPA, is recommended for a high hatching rate (ca. 95%) of rotifer resting eggs.