• 수산해양기술연구
• /
• 제36권3호
• /
• pp.234-243
• /
• 2000

This paper is to study population ecological characteristics, including growth parameters, survival rate, instantaneous coefficients of natural and fishing mortalities, and age at first capture of the soft-shelled clam, Mya japonioa in the intertidal zone of South Sea in Korea. For describing growth of the clam a von Bertalanffy growth model was adopted, The von Bertalanffy growth curve had an additive error structure and the growth parameters estimated from a non-linear regression were SH/sub ∞/=79.83mm, K=0.26, and t/sub 0/= -0.01. Survival rate (S) of the soft-shelled clam was 0.26 (SD=0.02). The instantaneous coefficients of natural mortality (M) was estimated to be 0.78/year and fishing mortality (F) 0.57/year for the soft-shelled clam. The age at first capture (t/sub c/) was estimated as 2.69 year. The mean densities of the soft-shelled clam by bottom type were 3.40 inds./m²(SE=0.18) in the sand, 63.4 inds./m²(SE= 0.53) in the muddy sand, and 0 inds./m2 (SE=0) in the gravelly sand. The mean densities of the soft-shelled clam by 3 different areas were 4.88 inds./m²(SE=0.09), 2.61 inds./m²(SE=0.13), 7.20 inds./m²(SE=0.18), respectively and the biomass of the clam were estimated as 131mt, 121mt, 665mt, respectively. An yield-per-recruit analysis showed that the current yield-per-recruit of about 8.30g with F=0.57/year and the age at first capture (t/sub c/) 2.69 year, was lower than the maximum possible yield-per-recruit of 9.60g. Fixing to at the current level and increased fishing intensity (F) could produce an increase in the predicted yield-per-recruit from 8.30g to about 9.40. However, estimated yield-per-recruit increased to 1.30g by decreasing to from the current age (2.69 year) to age two with F fixed at the current level. Yield-per-recruit was estimated under harvest strategies based on F/sub max/ and F/sub 0.1/.

• 호남수학학술지
• /
• 제31권2호
• /
• pp.233-237
• /
• 2009

In this paper, we show that: (1) every strongly ${\omega}$-monolithic space X with countable fan-tightness is Fr$\'{e}$chet-Urysohn; (2) a direct proof of that X is Lindel$\"{o}$f when $C_p$(X) is Fr$\'{e}$chet-Urysohn; and (3) X is Lindel$\"{o}$f when X is paraLindel$\"{o}$f and $C_p$(X) is AP. (3) is a generalization of the result of [8]. And we give two questions related to Fr$\'{e}$chet-Urysohn and AP properties on $C_p$(X).

• 한국재료학회지
• /
• 제33권4호
• /
• pp.124-129
• /
• 2023

This study assessed the influences of fluorine introduced into DLC films on the structural and mechanical properties of the sample. In addition, the effects of the fluorine incorporation on the compressive stress in DLC films were investigated. For this purpose, fluorinated diamond-like carbon (F-DLC) films were deposited on cobalt-chromium-molybdenum substrates using radio-frequency plasma-enhanced chemical vapor. The coatings were examined by Raman scattering (RS), Attenuated total reflectance Fourier transform infrared spectroscopic analysis (ATR-FTIR), and a combination of elastic recoil detection analysis and Rutherford backscattering (ERDA-RBS). Nano-indentation tests were performed to measure hardness. Also, the residual stress of the films was calculated by the Stony equation. The ATR-FTIR analysis revealed that F was present in the amorphous matrix mainly as C-F and C-F₂ groups. Based on Raman spectroscopy results, it was determined that F made the DLC films more graphitic. Additionally, it was shown that adding F into the DLC coating resulted in weaker mechanical properties and the F-DLC coating exhibited lower stress than DLC films. These effects were attributed to the replacement of strong C = C by feebler C-F bonds in the F-DLC films. F-doping decreased the hardness of the DLC from 11.5 to 8.8 GPa. In addition, with F addition, the compressive stress of the DLC sample decreased from 1 to 0.7 GPa.

• 한국전기전자재료학회논문지
• /
• 제23권3호
• /
• pp.216-221
• /
• 2010

Employing statistical design of experiments, the difference in doping behaviors of rare-earth ions and their effects on the dielectric property and microstructure of $BaTiO_3$-MgO-$MnO_2$-($Ba_{0.4}Ca_{0.6}$) $SiO_3-Re_2O_3$ (Re = $Y_2O_3$, $Er_2O_3$) system were investigated. Through the statistical analysis we have found that the amount of $Re_2O_3$ are significantly affecting on the dielectric properties. The $Re_2O_3$ improved the dielectric constant, dielectric loss and R*C constant, so the appropriate contents of $Y_2O_3$ and $Er_2O_3$ were 0.8 ~ 1.2 mol% and 0.8 ~ 1.3 mol%, respectively. The MLCC(mutilayer chip capacitor) with $2.0{\times}1.2{\times}1.2mm$ size and 475 nF was also suited for X7R with the above composition. It showed that the dielectric constant and RC constant were 2,839 and 3,675 ${\Omega}F$, respectively in the sintering condition at $1250^{\circ}C$ in $Po_2$ $10^{-7}$ Mpa.

• 대한화학회지
• /
• 제63권6호
• /
• pp.453-458
• /
• 2019

Synthesis of ZnCo₂O₃ oxide is performed by sol-gel method via nitrate-citrate route. Powder X-ray diffraction (XRD) study shows monoclinic unit cell having lattice parameters: a = 5.721(1) Å, b = 8.073(2) Å, c = 5.670(1) Å, β = 93.221(8)°, space group P_2/m and Z = 4. Average crystallite sizes determined by Scherrer equation are the range ~14-32 nm, whereas SEM micrographs show nano-micro meter size particles formed in ZnCo₂O₃. Endothermic peak at ~798 K in the Differential scanning calorimetric (DSC) trace without weight loss could be due to structural transformation and the endothermic peak ~1143 K with weight loss is due to reversible loss of O₂ in air atmosphere. Energy Dispersive X-ray (EDX) analysis profile shows the presence of elements Zn, Co and O which indicates the purity of the sample. Magnetic measurements in the range of +12 kOe to -12 kOe at 10 K, 77 K, 120 K and at 300 K by PPMS-II Physical Property Measurement System (PPMS) shows hysteresis loops having very low values of the coercivity and retentivity which indicates the weakly ferromagnetic nature of the oxide. Observed X-band EPR isotropic lineshapes at 300 K and 77 K show positive g-shift at g_iso ~2.230 and g_iso ~2.217, respectively which is in agreement with the presence of paramagnetic site Co²⁺(3d⁷) in the oxide. DC conductivity value of 2.875 ×10^-8 S/cm indicates very weakly semiconducting nature of ZnCo₂O₃ at 300 K. DRS absorption bands ~357 nm, ~572 nm, ~619 nm and ~654 nm are due to the d-d transitions ⁴T_1g(⁴F)→²E_g(²G), ⁴T_1g(⁴F)→⁴T_1g(⁴P), ⁴T_1g(⁴F)→⁴A_2g(⁴F), ⁴T_1g(⁴F)→⁴T_2g(⁴F), respectively in octahedral ligand field around Co²⁺ ions. Direct band gap energy, E_g~ 1.5 eV in the oxide is obtained by extrapolating the linear part of the Tauc plot to the energy axis indicates fairly strong semiconducting nature of ZnCo₂O₃.

• Earthquakes and Structures
• /
• 제23권4호
• /
• pp.373-384
• /
• 2022

To improve the seismic performance of suspended ceiling structures, various vibration-damping devices have been developed. However, the devices made of metals have a limit in that they cause large deformation and seriously damages the exterior of the suspended ceiling structure from the wall. As a results, their strengthening effect of the suspended ceiling structure was minimal. Thus, this study employed a spring and vibration-proof rubber effectively controlled vibrations without increasing horizontal seismic loads on the ceiling to enhance the seismic resistance of suspended ceiling structures. The objective of the study is to examine the dynamic properties of a seismic damping-isolation unit (SDI) with various details developed. The developed SDI was composed of a spring, embossed rubbers, and prestressed bolts, which were the main factors enhancing the damping effect. The shaking table tests were performed on eight SDI specimens produced with the number of layers of embossed rubber (n_s), presence or absence of a spring, prestressed force magnitude introduced in bolts (f_ps), and mass weight (W_m) as the main parameters. To identify the enhancement effect of the SDI, the dynamic properties of the control specimen with a conventional hanger bolt were compared to those of the SDI specimens. The SDI specimens were effective in reducing the maximum acceleration (A_{c max}), acceleration amplification factor (α_p), relative displacement (δ_R), and increasing the damping ratio (ξ) when compared to the control specimen. The A_{c max}, α_p, and δ_R of the SDI specimens with two rubbers, spring, and f_ps of 0.1f_by, where f_by is the yielding strength of the screw bolt were 57.8%, 58.0%, and 61.9% lower than those of the conventional hanger bolt specimens, respectively, resulting in the highest ξ (=0.127). In addition, the α_p of the SDI specimens was 50.8% lower than those specified in ASCE 7 and FEMA 356. Consequently, to accurately estimate the α_p of the SDI specimens, a simple model was proposed based on the functions of f_ps, stiffness constant of the spring (K), W_m, and n_s.

• 한국해양학회지:바다
• /
• 제26권4호
• /
• pp.327-342
• /
• 2021

연안은 전 지구 관점에서 대기 이산화탄소를 흡수하는 것으로 평가된다. 그동안 동해의 탄소 순환에 관한 연구들이 울릉분지에 집중되어 있어서 동해 연안이 탄소 순환에 기여하는 역할에 대한 이해는 제한적이다. 본 연구에서는 표층의 생물학적 과포화도(𝚫O₂/Ar)와 이산화탄소 분압(fCO₂)의 변화를 관측하여 울릉분지와 연안의 생물 펌프 세기 및 탄소 흡수력을 비교하였다. 연안은 저온 저염한 환경으로 고온 고염한 울릉분지와 대비되었다. 삼척과 포항 연안에서는 울릉분지에 비해 높은 생물량과 𝚫O₂/Ar, 낮은 fCO₂ 분포를 보여 연안에서 더 많은 일차 생산이 일어나 용존 CO₂ 흡수를 촉진한 것으로 나타났다. 삼척과 포항 연안에서 𝚫O₂/Ar을 기반으로 추정된 순군집생산(net community production)은 각각 19 ± 6과 60 ± 9 mmol O₂ m^-2d^-1로 울릉분지의 8 ± 4 mmol O₂ m^-2d^-1에 비하여 약 2-7배 가량 활발하게 생물 펌프가 작동하고 있었다. 삼척과 포항 연안의 CO₂ 교환율은 각각 -17.1 ± 8.9와 -25.8 ± 13.2 mmol C m^-2d^-1로, 울릉분지의 -4.7 ± 2.5 mmol C m^-2d^-1보다 약 4배에서 5배 가량 높았다. 삼척과 포항 연안에서는 울릉분지에 비하여 질소포화도가 최대 3% 낮게 나타나 일차생산자에 의한 질소 고정이 일어났을 가능성을 제시하였다.

• 한국결정성장학회지
• /
• 제22권2호
• /
• pp.73-77
• /
• 2012

스컬용융법으로 큐빅지르코니아(YSZ) 단결정들($ZrO_2$: $Y_2O_3$= 80 : 20, 70 : 30, 60 : 40, 50 : 50 wt%, $Co_3O_4$: 0.8wt%, $CeO_2$: 0.4wt%)을 성장시켜 $N_2$ 분위기 $1000^{\circ}C$에서 5시간 동안 열처리 하였다. 오랜지색, 황갈색 또는 갈색의 단결정들은 각각 갈적색, 황색 또는 녹색으로 변화되었다. 열처리 전 후의 YSZ 단결정들은 직경 6.5, 두께 2 mm의 웨이퍼로 연마 하였다. 각 시편의 광학적 또는 구조적 특성은 UV-VIS 분광광도계와 XRD(X-ray diffraction)로 분석하였으며, $Ce^{3+}(^2F_{5/2,7/2}(4f){\rightarrow}^2T_g(5d^1))$, $Co^{2+}(^4A_2(^4F){\rightarrow}^4T_1(^4F)$ 또는 $^4T_1(^4P))$ 및 $Co^{3+}$에 의한 흡수, 이온화에너지 및 격자상수 변화를 확인하였다.

• 전기화학회지
• /
• 제10권4호
• /
• pp.239-244
• /
• 2007

산소자리에 치환된 불소가 $Li_{1-x}FeO_2Li_xMnO_2$ (Mn/(Mn + Fe) = 0.8) 양극 활물질에 미치는 영향을 고찰하기 위해 다양한 양의 불소를 치환시킨 $Li_{1-x}FeO_{2-y}F_y-Li_xMnO_2$ (Mn/(Mn + Fe) = 0.8, $0.05{\le}y{\le}0.15$) 양극 활물질을 고상법을 이용하여 합성하였다. 불소 미치환 시료 및 치환양이 0.05와 0.1의 시료의 경우, $1-1.5\;{\mu}m$ 크기의 막대 형상 분말 형태에 50-100 nm정도의 작은 구형 입자들이 주위에 분포되어 있는 형태이었다. 반면, 불소 치환양이 0.15인 시료의 경우, 그 모양이 구형으로 변화되어지며 입자가 급격하게 성장하였다. 합성된 시료를 이용하여 제작된 셀들의 충 방전 수행 결과, $Li/Li_{1-x}FeO_{1.9}F_{0.1}-Li_xMnO_2$ 셀이 163 mAh/g의 가장 높은 초기용량을 보였으며 50 싸이클 후에도 95%의 높은 가역 특성을 보였다. 특히, 활물질내의 불소 치환양이 증가할수록 초기 방전용량도 같이 증가하였으나, 불소이온의 치환양이 일정량을 (y>0.1) 넘는 경우에는 산소 자리에 불소이온이 완전하게 치환되지 못하고 불순물로 존재함으로써 전지의 가역특성을 현저하게 저하시키는 요인으로 작용함을 확인하였다.

• 한국세라믹학회지
• /
• 제48권3호
• /
• pp.246-250
• /
• 2011

Effects on sintering and electrical properties of $La_{0.7}Ca_{0.3}Cr_{0.9}Co_{0.1}O_{3-{\delta}}$ system, a interconnect material for cylindrical and flat tubular solid oxide fuel cells (SOFC), have been investigated by Ca-source when using $CaCO_3$ and $CaF_2$. When using $CaCO_3$ and $CaF_2$ was mixing as Ca-source, single phased perovskite solid solution was observed for each sample. The sintering temperature was decreased by $CaF_2$ contents was increased. When using 0.1 mole $CaF_2$ was densely sintered at $1400^{\circ}C$ and relative density was 93.8%. Also, electrical conductivity in oxidation and reducing atmosphere was 47, 4.3 S/cm, respectively, due to $F^-$ ion enhance the electrical conductivity in reducing atmosphere.