• Title/Summary/Keyword: C:N ratio

Search Result 2,894, Processing Time 0.038 seconds

Amorphous Silicon Carbon Nitride Films Grown by the Pulsed Laser Deposition of a SiC-$Si_3N_4$ Mixed Target

  • Park, Nae-Man;Kim, Sang-Hyeob;Sung, Gun-Yong
    • ETRI Journal
    • /
    • v.26 no.3
    • /
    • pp.257-261
    • /
    • 2004
  • We grew amorphous SiCN films by pulsed laser deposition using mixed targets. The targets were fabricated by compacting a mixture of SiC and $SiC-{Si_3}{N_4}$ powders. We controlled the film stoichiometry by varying the mixing ratio of the target and the target-to-substrate distance. The mixing ratio of the target had a dominant effect on the film composition. We consider the structures of the SiCN films deposited using 30~70 wt.% SiC in the target to be an intermediate phase of SiC and $SiN_x$. This provides the possibility of growing homogeneous SiCN films with a mixed target at a moderate target-to-substrate distance.

  • PDF

Advanced Sewage Treatment by the Modified SBR(Sequencing Batch Reactor) Process (변형 연속회분식 반응기를 이용한 오수의 고도처리)

  • 김병군;서인석;홍성택;정위득
    • Journal of environmental and Sanitary engineering
    • /
    • v.17 no.3
    • /
    • pp.46-51
    • /
    • 2002
  • This study was performed to treat a sewage at the upper stream of dam using modified sequencing batch reactor, During the operating period, average $COD_{cr}$, removal efficiency was about 85% but average T-N and ${PO_4}^{3-}-P$ removal efficiencies were 43% and 30% respectively. Because the organic matter was very low compared with nitrogen and phosphorous in influent($BOD_{5}/{NH_4}^{+}-N{\;}={\;}2,{\;}BOD_{5}/{PO_4}^{3-}-P{\;}={\;}15.6$), nitrogen and phosphorus removal efficiency was relatively low. Average nitrogen removal efficiency was 50 % at $10^{\circ}C$ or above and it was 36 % at $10^{\circ}C$ or below. As reactor was located in outdoor without any thermostat, temperature decreased at least $2.4^{\circ}C$ in the winter season. Therefore, if we would apply this modified sequencing batch reactor to sewage which concentration of organic matter was very low compared with nitrogen and phosphorous, we have to addition of external carbon and installation of any thermostat.

Removal of Ammonia Nitrogen and Organics from Piggery Wastewater Using BACC Process-II. Effect of COD/N on Removal of NItrogen and Organics (BACC를 이용한 축산폐수의 암모니아성 질소 및 유기물의 제거 II. COD/N비가 질소 및 유기물 제거에 미치는 영향)

  • 성기달;류원률;김인환;조무환
    • KSBB Journal
    • /
    • v.16 no.2
    • /
    • pp.140-145
    • /
    • 2001
  • To treat piggery wastewater containing refractory compounds including nitrogen, physical treatments using zeolite and biological processes were investigated. In biogical treatment, the removal efficiencies of organics and nitrogen in bioreador using BACC (Biological Activated Carbon Cartridge) media filled with granule activated carbon were examined. The best removal efficiencies achieved for TKN and COD(sub)cr were 82% and 53% respectively, when zeolite dosage was 300 g/L. Specific nitrogen removal ability was 3.2 mg/g at a zeolite dosage of 50 g/L, whereas specific nitrogen removal ability was 1.8 mg/g at a zeolite dosage of 300 g/L. The increased of C/N ratio resulting from the removal of nitrogen using zeolite led to an increase in removal efficiency of organics. As C/N ratio was increased to 2.0, 2.44 and 6.58 at a HRT of 48 hours in a BACC bioreactor, removal efficiencies of COD(sub)cr were increased to 53.5%, 57.4% and 80.6%. The removal efficiency of wastewater using a zeolite dosage of 399 g/L was increased by 27.1% compared to that of control treatment.

  • PDF

Effect of n-6/n-3 fatty acid ratio on metabolic partitioning in hyperlipidemic rats (n-6/n-3 지방산 비율이 고지혈증 랫드의 지질대사 분할에 미치는 영향)

  • Lee, Seunghyung;Um, Kyung-Hwan;Park, Byung-Sung
    • Journal of the Korean Applied Science and Technology
    • /
    • v.35 no.3
    • /
    • pp.643-653
    • /
    • 2018
  • This study was investigated the mechanism of action of n-6/n-3 fatty acid ratio on the metabolic partitioning of blood glycerolipids by in vivo monitoring technique in hyperlipidemic animal model rats. The ratio of cholesteryl 14C-oleate metabolized in the liver of total glycerolipids was lower in the order of n-6/n-3 ratios of 4:1, 15:1, 30:1 and control group (p<0.05). The secretion amount of phospholipid was higher in the order of n-6/n-3 ratio 4:1, 15:1, 30:1 than the control (p<0.05). The secretion amount of triglyceride was lower in especially 4:1, in order of n-6/n-3 4:1, 15:1 and 30:1 compared with the control. The ratio of phospholipid partitioning to total glycerolipid was high in orfer of n-6/n-3 ratio 4:1, 15:1, 30:1 and control (p<0.05). The triacylglycerol partitioning (%) via liver was higher 72.97, 75.93, 78.12% in n-6/n-3 4;1, 15:1, 30:1, respectively than the control of 82.25%, according to increased n-6/n-3 (p<0.05). The phospholipid partitioning (%) was lower 25.15, 18.87, 18.15% in n-6/n-3 4;1, 15:1, 30:1, respectively, compared to control 11.04%, according to increased n-6/n-3 (p<0.05).

Structure Behavior of Sputtered W-B-C-N Thin Film for various nitrogen gas ratios (PVD법으로 증착한 W-B-C-N 박막의 질소량에 따른 구조변화 연구)

  • Song, Moon-Kyoo;Lee, Chang-Woo
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2005.11a
    • /
    • pp.109-110
    • /
    • 2005
  • We have suggested sputtered W-C-N thin film for preventing thermal budget between semiconductor and metal. These results show that the W-C-N thin film has good thermal stability and low resistivity. In this study we newly suggested sputtered W-B-C-N thin diffusion barrier. In order to improve the characteristics, we examined the impurity behaviors as a function of nitrogen gas flow ratio. This thin film is able to prevent the interdiffusion during high temperature (700 to $1000^{\circ}C$) annealing process and has low resistivity ($\sim$200$\mu{\Omega}-cm$). Through the analysis of X-Ray diffraction, resistivity and XPS, we studied structure behavior of W-B-C-N diffusion barrier.

  • PDF

The Effect of Diet Varing Linolenic Acid and Linoleic Acid Content on Lipid Metabolism and Antithrombosis in Different Aged Rats (식이 Linolenic Acid와 Linoleic Acid 함량변화가 흰주의 연령에 따른 지방대사 및 항혈전효과에 미치는 영향)

  • 윤군애
    • Journal of Nutrition and Health
    • /
    • v.27 no.10
    • /
    • pp.967-978
    • /
    • 1994
  • This study was done to investigate the effect of age and dietary linolenic acid content and the linolenic acid/linoleic acid(LNA/LA) ratio on the lipid metabolism and formation of PGI2 and TXA2. The male Sprague-Dawley rats were fed 6 different with 0.2, 0.4, 0.6 of LNA/LA ratio within either 8% LNA(high LNA) or 4% LNA(low LNA) of fatty acid content for different feeding period(1, 4, 12 month). The dietary fat used were sesame oil, perilla oil, soybean oil and beef tallow. The concentration of serum total lipid, total cholesterol and HDL-C were increased with aging. Triglyceride concentration was decreased in 0.2 ratio of LNA/LA. The lipid content of liver showed similar tendency to that of serum. The ratio of PGI2/TXA2 was increased in 1 month rats and antithrombotic effect was reduced significantly with increasing age. The PGI2/TXA2 ratio was tended to be higher in diet of 0.2 and 0.4 LNA/LA ratio at high LNA level and in diet of 0.6 LNA/LA ratio at low LNA level. Especially PGI2/TXA2 ratio was increased linearly with rising LNA/LA ratio at low LNA level. It seemed that the LNA content and LNA/LA ratio had interaction to increase the antithrombotic effect bychanging TXA2 synthesis. And the dietary fatty acid related effect lowering the serum and liver lipid content, excepting triglyceride, was increased when dietary n3/n6 ratio was high(0.6) at both high and low n3 level. Therefore, it could not be recommended to consume large amount of n3 fatty acid or high ratio of n3/n6 to prevent cardiovascular diseases. These results suggested that the dietary fatty acid ratio of n3/n6 could be determined based on the n-3 content of dietary fat to reduce the risk of cardiovascular disease.

  • PDF

Composting of Swine Feces Using Sawdust, Rice Straw Rice Hull or Newspaper as a Bulking Material (톱밥, 볏짚, 왕겨 및 신문지를 이용한 돈분의 퇴비화)

  • 최경호;박석환;정문식
    • Journal of Environmental Health Sciences
    • /
    • v.21 no.1
    • /
    • pp.56-67
    • /
    • 1995
  • This study was carried out to observe how composting reaction proceed in the optimum composting condition and to understand the characteristics of final compost, when swine feces was amended with different bulking material. Sawdust, rice straw, and rice hull were selected as bulking materials and each of these was mixed with swine feces to obtain the optimum range of moisture contents and C:N ratio. To grasp the influence of newspaper on cornposting reaction when it flew into the composting site intentionally or accidentally, another composting reaction using newspaper as a bulking material was studied. In this experiment, raw material mixes containing the same amount of organic materials were put into 4 composting reactors and composted in the same environmental condition for 3 weeks from Aug. 1, 1994 to Aug. 22, 1994. The followings are the main results of this study. 1. The maximum temperatures reached at during cornposting reaction were 53.8$\circ$C, 51.9$\circ$C, 52.7$\circ$C, and 52.1$\circ$C in the reactor using sawdust, rice straw, rice hull, and newspaper as a bulking material respectively: Thermophilic temperatures were maintained for 72, 108, 108, and 111 hours in each reactor. Mean temperatures of reactors using sawdust, rice straw, rice hull, or newspaper as a bulking materials were 39.7$\circ$C, 39.5$\circ$C, 41.3$\circ$C, and 40.3$\circ$C, but no significant difference between these mean temperatures was observed(p>0.05). Each composter showed significant difference from room temperature(p<0.01), and the mean difference between them was 9.4$\circ$C. 2. Ash contents of each reactor increased rapidly in order of rice straw, rice hull, newspaper, and sawdust according to the pattern of second order function. This rate of increase seemed to result from structural characteristics of a bulking material. The absolute values of second order coefficient of these regression functions were 0.0199, 0.0159, 0.0157, and 0.0144 in each reactor using rice straw, rice hull, newspaper, or sawdust as a bulking material. 3. C:N ratio decreased as the reaction proceeded. Degree of decrease was in order of rice straw, rice hull, newspaper, and sawdust. This sequence was consistent with the increase rate of ash content. The ratios of initial C:N ratio to final C:N ratio were 0.45, 0.53, 0.64, and 0.75 in each reactor using rice straw, rice hull, newspaper, and sawdust as a bulking material respectively. From this ratios, it was possible to infer that all the composting reactions were completed. 4. Fertilizer content containing in the final compost was 1.61~2.20% of N, and 0.35~0.54% of P in dry weight base. According to the classification standard for compost constituent by Higgins, all composts had the intermediate grade of N, but below the low grade of P excepting the newspaper amended compost(fall into the range of the low grade). 5. Heavy metal contents contained in the composts were analyzed. In case of Cd, the range of 0.58~1.11 $\mu$g/g was observed, and in case of Pb, the range of 24.76~39.53 $\mu$g/g was observed(in wet weight base). These values are below the permissible heavy metal level for compost of foreign countries.

  • PDF

GPS-X Based Modeling on the Process of Gang-byeon Sewage Treatment Plant and Design of Recycle Water Treatment Process (GPS-X 기반 모델링에 의한 강변사업소 처리효율 분석 및 반류수 처리 공정 설계)

  • Shin, Choon Hwan
    • Journal of Environmental Science International
    • /
    • v.25 no.11
    • /
    • pp.1493-1498
    • /
    • 2016
  • The efficiencies of Gang-Byeon sewage treatment facilities, which are based on GPS-X modelling, were analysed and used to design recycle water treatment processes. The effluent of an aeration tank contained total kjeldahl nitrogen (TKN) of 1.8 mg/L with both C-1 and C-2 conditions, confirming that most ammonia nitrogen ($NH_3{^+}-N$) was converted to nitrate nitrogen ($NO_3{^-}-N$). The concentrations of $NH_3{^+}-N$ and $NO_3{^-}-N$ were found to be 222.5 and 227.2 mg/L, respectively, with C-1 conditions and 212.2 and 80.4 mg/L with C-2 conditions. Although C-2 conditions with higher organic matter yielded a slightly higher nitrogen removal efficiency, sufficient denitrification was not observed to meet the discharge standards. For the total nitrogen (T-N) removal efficiency, the final effluent concentrations of T-N were 293.8 mg/L with biochemical oxygen demand (BOD) of 2,500 mg/L, being about 1.5 times lower than that (445.3 mg/L) with BOD of 2,000 mg/L. Therefore, an external carbon source to increase the C/N ratio was required to get sufficient denitrification. During the winter period with temperature less than $10^{\circ}C$, the denitrification efficiency was dropped rapidly even with a high TKN concentration (1,500 mg/L). This indicates that unit reactors (anoxic/aerobic tanks) for winter need to be installed to increase the hydraulic retention time. Thus, to enhance nitrification and denitrification efficiencies, flexible operations with seasons are recommended for nitrification/anoxic/denitrification tanks.

The Effect of Post-deposition Annealing on the Properties of Ni/AlN/4H-SiC Structures (Ni/AlN/4H-SiC 구조로 제작된 소자의 후열처리 효과)

  • Min, Seong-Ji;Koo, Sang-Mo
    • Journal of IKEEE
    • /
    • v.24 no.2
    • /
    • pp.604-609
    • /
    • 2020
  • We investigated the influence of rapid thermal annealing on aluminum nitride (AlN) thin film Schottky barrier diodes (SBDs) manufactured structures deposited on a 4H-silicon carbide (SiC) wafer using radio frequency sputtering. The Ni/AlN/4H-SiC devices annealed at 400℃ exhibited Schottky barrier diode (SBDs) properties with an on/off current ratio that was approximately 10 times higher than that of the as-deposited device structures and the devices annealed at 600℃ as measured at room temperature. Auger electron spectroscopy (AES) measurements revealed that atomic oxygen concentrations in the annealed AlN devices at 400℃, is ascribed to the improvement in on/off ratio and the reduction of on-resistance. Additionally, we investigated the electrical characteristics of the AlN/SiC SBD structures depending on the frequency variation of sound waves.

Nitrogen Removal Comparison in Porous Ceramic Media Packed-Bed Reactors by a Consecutive Nitrification and Denitrification Process

  • Han, Gee-Bong;Woo, Mi-Hee
    • Environmental Engineering Research
    • /
    • v.16 no.4
    • /
    • pp.231-236
    • /
    • 2011
  • Biological nitrogen removal, using a continuous flow packed-bed reactor (CPBR) in a consecutive nitrification and denitrification process, was evaluated. An apparent decline in the nitrification efficiency coincided with the steady increase in $NH_4{^+}$-N load. Sustained nitrification efficiency was found to be higher at longer empty bed contact times (EBCTs). The relationship between the rate of alkalinity consumption and $NH_4{^+}$-N utilization ratio followed zero-order reaction kinetics. The heterotrophic denitrification rate at a carbon-tonitrogen (C/N) ratio of >4 was found to be >74%. This rate was higher by a factor of 8.5 or 8.9 for $NO_3{^-}$-N/volatile solids (VS)/day or $NO_3{^-}-N/m^3$ ceramic media/day, respectively, relative to the rates measured at a C/N ratio of 1.1. Autotrophic denitrification efficiencies were 80-90%. It corresponds to an average denitrification rate of 0.96 kg $NO_3{^-}-N/m^3$ ceramic media/day and a relevant average denitrification rate of 0.28 g $NO_3{^-}$-N/g VS/day, were also obtained. Results presented here also constitute the usability of an innovative porous sulfur ceramic media. This enhanced the dissolution rate of elemental sulfur via a higher contact surface area.