• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.9
• /
• pp.1248-1255
• /
• 2009

This study was carried out to evaluate the fatty acid composition in Nellore cows supplemented with either linseed (n-3) or canola grains (n-6 and n-9). Fifteen Nellore cows, aged five years and bodyweight 550 kg${\pm}$48 kg, were randomly distributed to the following treatments: CON (control), LIN (linseed) and CAN (canola grains). The cows were fed for 80 days. The concentrations of C18:0, C18:2 n-6 and C20:3 n-6 fatty acid were higher (p<0.10) in CON blood plasma in comparison to follicular liquid. Likewise, PUFA, n-6 contents, PUFA:SFA and n-6:n-3 ratios were higher (p<0.10) in blood plasma. On the other hand, C18:1 n-9, C22:5 n-3, MUFA and n-3 contents were lower (p<0.10) in blood plasma. C18:0, C18:2 n-6, C18:3 n-3, C22:5 n-3, PUFA, n-6, n-3 contents and PUFA:SFA ratio were higher (p<0.10) in LIN blood plasma than in the follicular liquid. Nevertheless, C14:0, C16:0, C16:1 n-7, PUFA, C16:0, C18:1 n-9 and MUFA contents were lower (p<0.10) in LIN blood plasma. On treatment CAN, the C18:0 and SFA contents, and n-6:n-3 ratios were higher (p<0.10) in blood plasma. However, C20:3 n-6, C22:5 n-3, PUFA and n-3 contents were lower (p<0.10) in blood plasma. C16:0, C18:0, PUFA, SFA contents and PUFA:SFA ratio did not differ (p>0.10) among the treatments. C14:0, C16:1 n-7, C18:2 n-6 and n-6 contents were higher (p<0.10) for CON and CAN than LIN. C17:1 n-7, C20:4 n-6 and C 22:0 contents were higher (p<0.10) for CAN than CON and LIN. C18:1 n-9, C18:3 n-3, MUFA and n-3 contents were higher (p<0.10) for LIN and CAN than CON. C20:3 n-6 content and n-6:n-3 ratio were higher (p<0.10) for CON than LIN and CAN. C22:5 n-3 content were higher (p<0.10) for CON and LIN than CAN. The concentrations of fatty acids in blood plasma and follicular liquid were not correlated for any fatty acid, independent of the treatment studied. Canola grain added to the diet of Nellore cows resulted in increased concentrations of fatty acids n-6 and n-3 in follicular liquid.

• Journal of Powder Materials
• /
• v.6 no.1
• /
• pp.18-35
• /
• 1999

Phase equilibria in the system Si3N4-TiC-TiCxN1-x-C-N were determined by thermodynamic calculations (CALPHAD-method). The reaction peaction paths for Si3N4-TiC and SiC-TiC composites in the Ti-Si-C-n system were simulated at I bar N2-pressure and varying terpreatures. At a temperature of 1923 K two tie-triangles (TiC0.34N0.66+SiC+C and TiC0.13N0.87+SiC+Si3N4) and two 2-phase fieds (TiCxN1-x+SiC; 0.13

• Analytical Science and Technology
• /
• v.21 no.3
• /
• pp.212-221
• /
• 2008

In order to investigate the information for effective detection and developing of latent fingerprints, we identified fatty acids composition of latent fingerprints on non-porous evidence surface and the chemical changes of latent fingerprint residue after print deposition during 7 months. Fingerprints from eight Korean male donors (aged 29-50 years) and one female donor (aged 36 years) were collected. All fingerprints were found to contain lauric acid (C12:0), myristic acid (C14:0), palmitic acid (C16:0), stearic acid (C18:0), elaidic acid (C18:1n9t), oleic acid (C18:1n9c), linoleic acid (C18:2n6c), arachidic acid (C20:0), linolenic acid (C18:3n3), erucic acid (C22:1n9) and docosadienoic acid (C22:2) and primarily palmitic acid (35.45-48.37%), oleic acid (14.84-28.49%), stearic acid (9.71-24.96%) and linoleic acid (7.68-18.8%) occupied 75% of total fatty acids. When the fingerprints were deposited at dark room for 7 months, total fatty acids components decreased about 12-25%. It can be explained that significant degradation of long-chain fatty acids such as elaidic acid (C18:1n9t), arachidic acid (C20:0), linolenic acid (C18:3n3), erucic acid (C22:1n9), and docosadienoic acid (C22:2) resulted in the generation of myristic acid (C14:0), myristoleic acid (C14:1) and pentadecanoic acid (C15:0).

• Journal of Animal Science and Technology
• /
• v.48 no.6
• /
• pp.847-860
• /
• 2006

This study investigated the effects of feeding Charolais steers on diets rich in either n-6 or n-3 polyunsaturated fatty acids (PUFA) and time on feed (TOF) on muscle fatty acid composition and content. Twenty eight steers were fed on ad libitum forage and one of two concentrates varying in the source of fat; soya (high in C18:2 n-6) or whole linseed (high in C18:3 n-3) for either 60 or 90 days in IGER (Institute of Grassland and Environmental Research, UK). The concentrates were fed at approximately 0.73 of total DM intake. TOF influenced carcass weight, conformation and fatness scores, which were higher at 90 v. 60 days (P<0.05). Diet did not affect total fatty acid content of neutral lipid in m. longissimus thoracis but feeding linseed increased total phospholipid fatty acid by approx- imately 15%(P<0.05). Linseed increased the amount and proportion of C18:3 n-3 (P<0.001) and the proportion of CLA (cis-9, trans-11 conjugated linoleic acid), while soya increased the content (P<0.05) and proportion (P<0.001) of C18:2 n-6 in muscle neutral lipid. In muscle phospholipid, linseed significantly increased the amount of CLA, C18:3 n-3 and its longer chain derivatives as well as C14:0, C16:0, C18:0. C18:1 trans and C18:2 n-6. The amount and proportion of C18:2 n-6 and its longer chain C20 derivatives were higher on feeding soya. TOF (90 v. 60 day) increased the content of C14:0, C16:0, C16:1, CLA, C18:1 n-9, C18:2 n-6 and C18:3 n-3 in muscle neutral lipid. The P:S was not affected by diet or TOF. The ratio of C18:2 n-6 : C18:3 n-3 and sum of n-6 : n-3 fatty acids were higher in muscle from animals fed on linseed v. soya (P<0.001). The study indicates that the PUFA composition of beef muscle may be significantly modified by feeding contrasting dietary lipids, soya vs. linseed. Feeding linseed produced a better balance of muscle fatty acids, more in line with current nutritional recommendations with a lower C18:2 n-6:C18:3 n-3 ratio associated with higher muscle content of C18:3 n-3 and C20:5 n-3 and CLA and lower C20:4 n-6.

• Journal of the Korean Ceramic Society
• /
• v.44 no.1 s.296
• /
• pp.37-42
• /
• 2007

The preparation of $TiC_{0.7}N_{0.3}$ powder by SHS in the system of $Ti-TiH_2-C$ ($N_2$ atmosphere) was investigated in this study. In the preparation of $TiC_{0.7}N_{0.3}$ powder, the effect of gas pressure, compositions such as Ti, $TiH_2$, C, and additive in mixture on the reactivity were investigated. At 50 atm of the initial inert gas pressure in reactor, the optimum composition for the preparation of pure $TiC_{0.7}N_{0.3}$ was $0.75Ti+0.25TiH_2+0.7C+0.5NaCl$. The $TiC_{0.7}N_{0.3}$ powder synthesized in this condition was a single phase with irregular shape.

• Journal of the Korean Mathematical Society
• /
• v.54 no.3
• /
• pp.967-986
• /
• 2017

We give the necessary condition for an operator defined on a cartesian product of $c_0(\mathcal{X})$ spaces to be summing or dominated and we show that for the multiplication operators this condition is also sufficient. By using these results, we show that ${\Pi}_s(c_0,{\ldots},c_0;c_0)$ contains a copy of $l_s(l^m_2{\mid}m{\in}\mathbb{N})$ for s > 2 or a copy of $1_s(l^m_1{\mid}{\in}\mathbb{N})$, for any $l{\leq}S$ < ${\infty}$. Also ${\Delta}_{s_1,{\ldots},s_n}(c_0,{\ldots},c_0;c_0)$ contains a copy of $l_{{\upsilon}_n(s_1,{\ldots},s_n)}$ if ${\upsilon}_n(s_1,{\ldots},s_n){\leq}2$ or a copy of $l_{{\upsilon}_n(s_1,{\ldots},s_n)}(l^m_2{\mid}m{\in}\mathbb{N})$ if 2 < ${\upsilon}_n(s_1,{\ldots},s_n)$, where ${\frac{1}{{\upsilon}_n(s_1,{\ldots},s_n})}={\frac{1}{s_1}}+{\cdots}+{\frac{1}{s_n}}$. We find also the necessary and sufficient conditions for bilinear operators induced by some method of summability to be 1-summing or 2-dominated.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.57-65
• /
• 2019

Purpose: The purpose is to clarify the effect of additional scattering ratio on the edge of the block according to the increasing block thickness with low melting point lead alloy and pure lead in electron beam therapy. Methods and materials: $10{\times}10cm^2$ Shielding blocks made of low melting point lead alloy and pure lead were fabricated to shield mold frame half of applicator. Block thickness was 3, 5, 10, 15, 20 (mm) for each material. The common irradiation conditions were set at 6 MeV energy, 300 MU / Min dose rate, gantry angle of $0^{\circ}$, and dose of 100 MU. The relative scattering ratio with increasing block thickness was measured with a parallel plate type ion chamber(Exradin P11) and phantom(RW3) by varying the position of the shielding block(cone and on the phantom), the position of the measuring point(surface ans depth of $D_{max}$), and the block material(lead alloy and pure lead). Results : When (depth of measurement / block position / block material) was (surface / applicator / pure lead), the relative value(scattering ratio) was 15.33 nC(+0.33 %), 15.28 nC(0 %), 15.08 nC(-1.31 %), 15.05 nC(-1.51 %), 15.07 nC(-1.37 %) as the block thickness increased in order of 3, 5, 10, 15, 20 (mm) respectively. When it was (surface / applicator / alloy lead), the relative value(scattering ratio) was 15.19 nC(-0.59 %), 15.25 nC(-0.20 %), 15.15 nC(-0.85 %), 14.96 nC(-2.09 %), 15.15 nC(-0.85 %) respectively. When it was (surface / phantom / pure lead), the relative value(scattering ratio) was 15.62 nC(+2.23 %), 15.59 nC(+2.03 %), 15.53 nC(+1.67 %), 15.48 nC(+1.31 %), 15.34 nC(+0.39 %) respectively. When it was (surface / phantom / alloy lead), the relative value(scattering ratio) was 15.56 nC(+1.83 %), 15.55 nC(+1.77 %), 15.51 nC(+1.51 %), 15.42 nC(+0.92 %), 15.39 nC(+0.72 %) respectively. When it was (depth of $D_{max}$ / applicator / pure lead), the relative value(scattering ratio) was 16.70 nC(-10.87 %), 16.84 nC(-10.12 %), 16.72 nC(-10.78 %), 16.88 nC(-9.93 %), 16.90 nC(-9.82 %) respectively. When it was (depth of $D_{max}$ / applicator / alloy lead), the relative value(scattering ratio) was 16.83 nC(-10.19 %), 17.12 nC(-8.64 %), 16.89 nC(-9.87 %), 16.77 nC(-10.51 %), 16.52 nC(-11.85 %) respectively. When it was (depth of $D_{max}$ / phantom / pure lead), the relative value(scattering ratio) was 17.41 nC(-7.10 %), 17.45 nC(-6.88 %), 17.34 nC(-7.47 %), 17.42 nC(-7.04 %), 17.25 nC(-7.95 %) respectively. When it was (depth of $D_{max}$ / phantom / alloy lead), the relative value(scattering ratio) was 17.45 nC(-6.88 %), 17.44 nC(-6.94 %), 17.47 nC(-6.78 %), 17.43 nC(-6.99 %), 17.35 nC(-7.42 %) respectively. Conclusions: When performing electron therapy using a shielding block, the block position should be inserted applicator rather than the patient's body surface. The block thickness should be made to the minimum appropriate shielding thickness of each corresponding using energy. Also it is useful that the treatment should be performed considering the influence of scattering dose varying with distance from the edge of block.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.5
• /
• pp.13-20
• /
• 2006

We have conducted standard penetration tests and static cone penetration tests that are widely used the land base examination on the soft ground subsurface of Yongdong area, and examined the correlation between them. We have also made a comparative analysis of the correlation between the indoor tests on the materials collected on the site and on-the-spot penetration tests. The results are as follows : The relationship between Standard Penetration Test N-value and Dutch Cone Tset show $Q_c=1.93N+0.29$ for organic soil, $Q_c=2.19N+0.20$ for clay, $Q_c=2.34N+1.06$ for silt, $Q_c=3.02N+0.54$ for silty sand, and $Q_c=3.47N+0.46$ for sand. In this case of sand $Q_c/N$ increases when the soil particles are larger. The relationship between standard penetration test N-value and Unconfined Compression Strength $q_u$ show $q_u=0.11N+0.03$ for organic soil, $q_u=0.11N+0.25$ for clay, and $q_u=0.18N-0.03$ for silt.

• Journal of Powder Materials
• /
• v.15 no.6
• /
• pp.503-508
• /
• 2008

Ti(C,N) solid solutions in hot-pressed Ti($C_{x}N_{1-x}$) (x=0.0, 0.3, 0.5, 0.7, 1.0) and 40TiC-40TiN-20Ni (in wt.%) cermet were characterized in this study. For hot-pressed Ti(C,N)s, the lattice parameters and hardness values of Ti(C,N) were determined by using XRD (X-Ray Diffraction) and nanoindentation. The properties of hot-pressed Ti(C,N) samples changed linearly with their carbon or nitrogen contents. For the TiC-TiN-Ni cermet, the hardness of the hard phase and binder phase were determined by nanoindentation in conjunction with microstructural observation. The measured hardness values were ${\sim}8.7$ GPa for the binder phase and ${\sim}28.7$ GPa for the hard phase, which was close to the hardness of hot-pressed Ti($C_{0.7}N_{0.3}$).

• Journal of the Korean Mathematical Society
• /
• v.32 no.2
• /
• pp.161-170
• /
• 1995

A complex $n(\geq 2)$-dimensional Kaehlerian manifold of constant holomorphic sectional curvature c is called a complex space form, which is denoted by $M_n(c)$. A complete and simply connected complex space form is a complex projective space $P_nC$, a complex Euclidean space $C^n$ or a complex hyperbolic space $H_nC$, according as c > 0, c = 0 or c < 0. Takagi [12] and Berndt [2] classified all homogeneous real hypersufaces of $P_nC$ and $H_nC$.