• Korean journal of applied entomology
• /
• v.42 no.1
• /
• pp.9-13
• /
• 2003

Cuticular hydrocarbons of antenna, legs and wings from two species of honeybee worker of Apis mellifera L. and Apis cerana F. can be analyzed directly with gas chromatograph and GC/MS without solvent extraction. The saturated hydrocarbons identified in selected part of both species were nC22, nC23, nC25-nC3O, nC32 and nC34 except nC24. Two saturated hydrocarbons, nC26 (23.0-42.6%) and nC28 (16.8-54.8%), were major compounds in both species and others were minor compounds. A. mellifera can be distinguished from A. cerana F. by having higher proportion of nC30, nC32 and nC34 by having lower proportion of nC25 from three selected part of both species.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2006.05a
• /
• pp.107-111
• /
• 2006

본 연구는 돼지 품종에 따른 지방 함량, 지방산 조성 및 전자코에 의한 향기 패턴의 차이를 분석하고자 실시하였으며, 평균 생시체중이 111 kg인 멧돼지 5두, 64 kg인 재래흑돼지 5두 및 114 kg인 개량종 돼지($Landrace{\times}Yorkshire$) 5두의 등심(M. longissimus) 부위를 본 실험에 이용하였다. 근내 지방함량은 재래흑돼지가 멧돼지, 개량종 돼지보다 유의적으로 높았다(p<0.05). 지방산 조성에서 C14:0, C18:3n3, MUFA/SFA 비율은 재래흑돼지가 가장 유의적으로 높았으며(p<0.05), C18:1n9는 개량종 돼지가 멧돼지보다 높았다(p<0.05). C16:1n7, C18:1n7, UFA/SFA 비율은 멧돼지가 가장 높았으며(p<0.05), C18:0, C20:1n9는 멧돼지가 가장 낮았다(p<0.05). C20:4 n6은 멧돼지가 개량종 돼지보다 높았고(p<0.05), C22:4n6은 재래흑돼지가 가장 높았으며(p<0.05), C22:5n3은 멧돼지가 재래흑돼지보다 높았다(p<0.05). PUFA n6/n3 비율은 개량종 돼지가 가장 낮았으며(p<0.05), 멧돼지가 재래흑돼지보다 낮았다(p<0.05). 전자코의 PCA에 의한 향기패턴은 신선육에서 품종에 따른 차이가 명확히 나타났으며, 가열육에서는 멧돼지 및 재래흑돼지, 개량종 돼지간에 차이가 나타났다. 따라서 재래흑돼지가 가장 높은 근내 지방 함량 및 가장 낮은 MUFA/SFA 비율을 가졌고, 멧돼지가 가장 높은 UFA/SFA 비율을 가졌으며, 개량종 돼지가 가장 낮은 PUFA n6/n3 비율을 가졌다. 또한 전자코에 의해 돼지 품종에 따른 돈육의 향기 패턴 차이를 효과적으로 분별할 수 있었다.

• Journal of Animal Science and Technology
• /
• v.45 no.4
• /
• pp.617-626
• /
• 2003

This experiment employed a rumen simulated continuous culture system to examine the possibility of improving the rumen bypass of polyunsaturated fatty acids (PUFA) by using a high proportion of concentrate in the feed, and compared soya and linseed in terms of conjugated linoleic acid (CLA) production. No effect of type of fat source was observed on ruminal fermentation. A high proportion of concentrate (80%) in the feed decreased (P<0.001) vessel pH but increased (P<0.01) ammonia nitrogen, total VFA, acetate, butyrate and valerate concentrations compared with a low proportion (40%). Fat sources (soya vs. linseed) and concentrate ratio in the feed did not affect digestibilities of organic matter (OM), total nitrogen, neutral detergent fiber (NDF) and acid detergent fiber (ADF). Soya increased the flows of trans C18:1, C18:2 n-6 and C18:3 n-3 compared with linseed. The difference in fat source alone did not affect the flow of CLA but this was increased when high levels of soya and linseed were associated with a high proportion of concentrate in the feed. There was no effect of fat source on biohydrogenation of C18:1 n-9 and C18:2 n-6, but biohydrogenation of C18:3 n-3 and total C18 PUFA was higher with the linseed than with the soya treatment. A high proportion of concentrate decreased biohydrogenation of C18:2 n-6, C18:3 n-3 and total C18 PUFA compared with a low proportion.

• Journal of Aquaculture
• /
• v.10 no.3
• /
• pp.335-346
• /
• 1997

Denitrification is one of the important processes of removing nitrate from in recirculating aquaculture systems. And this process is affected by many factors such as external organic carbon sources, hydraulic retention time (HRT), COD/NO3--N (C:N) ratio, etc. However, not many studies were done for the optimum conditions of denitrification in the recirculation system for aquaculture. Therefore, this study was conducted to find out the optimum removal condition of NO3--N using submerged denitrification biofilter. The combinations of two external organic carbon sources (glucose and methanol), two HRT (4 and 8-hour) and four differnent C : N ratios (3, 4, 5, 6) were tested. The removal efficiencies of NO3--N and total inorganic nitrogen (TIM) at 8-hour HRT were better than those at 4-hour's (P<0.05). The maximum removal efficiency of NO3--N by methanol (97.8%) was achieved at HRT and C : N ratio were 8-hour and 4.0 respectively. The efficiencies of methanol for the removal of NO3--N and TIN were always better than those of glucose (P<0.05). The maximum removal efficiencies of total inorgainc nitrogen (TIN) were gained at C : N ration of 5.0. The maximum removel efficiencies of TIN using methanol and glucose were 96.9% and 71.5% respectively. Anaerobic condition which is necessary for denitrification process was not made until the 8-hour HRT and higher C : N ratio (5.0). Removal of NO3--N at 4-hour HRT and C : N ration lower than 5.0 were inhibited by oxygen and/or low quantity of external organic carbon. Removal efficiencies of NO3--N were also inhibited by high C : N (6.0) ratio when HRT was 8-hour.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.9
• /
• pp.654-659
• /
• 2013

This study was conducted to identify an optimal ratio of carbon to nitrogen (C/N ratio) for denitrification of nitrate using molasses as an external carbon source. A series of batch and column tests was conducted using an indigenous bacterium Pseudomonas sp. KY1 isolated from a nitrate-contaminated soil. For the initial nitrate-nitrogen concentration of 100 mg-N/L, batch test results indicated that C/N ratio of 3/1 was the optimal ratio with a relatively high pseudo-first-order reaction constant of $0.0263hr^{-1}$. At C/N ratio of 3/1, more than 80% of nitrate-nitrogen concentration of 100 mg-N/L was removed in 100 hrs. Results of column tests with a flow velocity of 0.3 mL/min also indicated that the C/N ratio of 3/1 was optimal for denitrification with minimizing remaining molasses concentrations. After 172 hrs of column operation (35 pore volumes) with an influent nitrate-nitrogen concentration of 100 mg-N/L, the effluent met the drinking water standard (i.e., 10 mg $NO_3$-N/L).

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.87-87
• /
• 2018

다이아몬드 상 탄소(diamond-like carbon, DLC)는 상당량의 $sp^3$ 결합을 가지는 비정질 탄소(a-C) 또는 수소화 비정질 탄소(a-C:H)로 이루어진 준안정 형태의 탄소이다. DLC는 전기 저항과 굴절률이 높고 화학적으로 다른 물질과 반응하지 않으며, 마찰계수가 낮고 경도가 높아 자기 디스크, 광학 소자 등의 다양한 분야에서 적용되고 있다[1,2]. 또한 다이아몬드에 비해 상온에서 성장이 가능할 정도로 합성온도가 낮아 적용 기판의 제한이 거의 없고, 증착 방법과 조건에 따라 탄소 결합의 다양성과 비정질성이 변화하기 때문에 넓은 범위의 특성을 얻을 수 있는 장점이 있다. 지금까지 DLC 박막의 광학적 특성, 특히 굴절률, 광학적인 에너지 밴드 갭, 자외선과 적외선 투과성에 대해서는 많은 연구가 진행되었으나 가시광선의 투과성에 대한 연구는 제한적이며[4], 가시광선 투과도 개선에 대한 연구는 전무하다. 본 연구에서는 ITO 기판 위에 DLC를 합성하고 기계적 특성과 가시광선 영역 투과도를 조사하였다. RF-PECVD(radio frequency plasma enhanced chemical vapor deposition) 방법에 의해서 $C_2H_2+Ar$ 혼합 가스 비율과 $C_2H_2+N_2$ 혼합 가스 비율을 변화시켜 ITO 기판 위에 DLC 박막을 합성하였다. 공정 압력과 rf-power, 증착시간, 기판온도는 0.2 torr, 40 W, 5 분, $50^{\circ}C$로 고정하고, 공정 가스는 $C_2H_2+Ar$과 $C_2H_2+N_2$가 200 sccm이 되도록 비율을 변화하였다. $C_2H_2:Ar$과 $C_2H_2:N_2$의 비율은 180 : 20, 160 : 40, 140 : 60, 120 : 80, 100 : 100이 되도록 가스의 유량을 조절하였다. 투과도는 가시광선(380 ~ 780 nm) 범위에서 측정하였고 두께와 표면조도는 AFM으로 측정하였다. 투과도는 $C_2H_2+Ar$의 Ar 가스 비율이 증가할수록 증가해 140 : 60일 때 최댓값을 나타낸 후 다시 감소하였다. $C_2H_2+N_2$ 투과도는 $N_2$ 가스 비율이 증가할수록 감소하는 경향을 나타내었다. 표면 거칠기는 $C_2H_2+Ar$ 혼합 가스를 사용한 경우의 Ar의 가스 비율이 증가할수록 증가하였다. 그러나 $C_2H_2+N_2$ 혼합 가스를 사용한 경우에는 $N_2$ 가스의 혼합 비율이 증가할수록 감소하였다.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.643-653
• /
• 2018

This study was investigated the mechanism of action of n-6/n-3 fatty acid ratio on the metabolic partitioning of blood glycerolipids by in vivo monitoring technique in hyperlipidemic animal model rats. The ratio of cholesteryl 14C-oleate metabolized in the liver of total glycerolipids was lower in the order of n-6/n-3 ratios of 4:1, 15:1, 30:1 and control group (p<0.05). The secretion amount of phospholipid was higher in the order of n-6/n-3 ratio 4:1, 15:1, 30:1 than the control (p<0.05). The secretion amount of triglyceride was lower in especially 4:1, in order of n-6/n-3 4:1, 15:1 and 30:1 compared with the control. The ratio of phospholipid partitioning to total glycerolipid was high in orfer of n-6/n-3 ratio 4:1, 15:1, 30:1 and control (p<0.05). The triacylglycerol partitioning (%) via liver was higher 72.97, 75.93, 78.12% in n-6/n-3 4;1, 15:1, 30:1, respectively than the control of 82.25%, according to increased n-6/n-3 (p<0.05). The phospholipid partitioning (%) was lower 25.15, 18.87, 18.15% in n-6/n-3 4;1, 15:1, 30:1, respectively, compared to control 11.04%, according to increased n-6/n-3 (p<0.05).

• Journal of Aquaculture
• /
• v.12 no.1
• /
• pp.47-56
• /
• 1999

Denitrification by anaerobic bacteria is one of the most common processes of removing nitrate from recirculating aquaculture systems. This process is affected by many factors such as external carbon sources, hydraulic retention time (HRT), and $COD/NO_3-N$ ratio. Although external organic carbon sources are essential for the denitrification process, these also contribute to increase dissolved organic carbon concentration in recirculating aquaculture systems. So these external organic carbons must be removed from the systems. This study was conducted to find out the optimum operating conditions for the removal of external organic carbons in a submerged denitrification biofilter. Combinations of two external carbon sources (glucose and methanol), two HRT (4- and 8-hour), and four different C:N ratios (3, 4, 5, and 6) were used in this experiment. The removal efficiencies of organic carbon sources at 8-hour HRT were always better than those at 4-hour's (P<0.05). Maximum removal efficiencies were achieved when C:N ratio was 5 in both glucose and methanol. The removal efficiencies of methanol were always better than those of glucose. The maximum removal efficiencies of glucose and methanol were 76.5% and 84.0%, respectively and the removal rates were 223.5 $g/m^2/day$ and 247.1$g/m^2/day$. The maximum removal rates of glucose (290.9 $g/m^2/day$) and methanol (355.6 $g/m^2/day$) were achieved at 4-hour HRT and 5 C:N ratio. But the concentrations of SCOD in the effluent of both glucose ($52.5 mg/\ell$) and methanol ($40.9 mg/\ell$) were too high for rearing fish. Therefore, the optimum operating conditions for the removal of external carbon in a submerged denitrification biofilter were 8-hour HRT and 5 C:N ratio. And methanol showed better efficiency as an external carbon sources.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.654-666
• /
• 2018

This study was determined the effects of dietary omega-6 and 3 fatty acid ratios (n-6/n-3, 0, 4:1, 15:1, 30:1) on lipid metabolism in obese model animal rats. Blood triacylglycerol, total cholesterol, LDL-C, glucose, ALT, AST, insulin, and leptin concentrations in n-6/n-3 group were decreased by 22.21, 20.60, 52.96, 15.71, 11.97, 9.13, 37.57, 45.98%, respectively, while HDL-C and phospholipid concentrations were increased by 28.38, 80.39% respectively, compared with control group, as especially in 4:1 group showed the greatest effect. SREPB-$1{\alpha}$ and SREPB-2 mRNA in liver tissues were down-regulated in n-6/n-3 group, but LPL-mRNA of PPARs in adipose tissue was up-regulated compared with control group. The adipocyte size in liver tissues was decreased in the order of n-6/n-3 ratio of 30:1, control, 15:1 groups, and the adipocyte size in adipose tissues was decreased in the order of n-6/n-3 ratio of control, 30:1, 15:1, 4:1 groups.

• KSBB Journal
• /
• v.7 no.2
• /
• pp.102-106
• /
• 1992

Effects of nitrogen souses and C/N ratio were investigated on the production of extracellular microbial surfaclant, sophorolipid, from C. bombiocola. Organic nitrogen sources, such as urea, peptone and yeast extract was found to be more effective for sophorolipid production, than inorganic nitrogen sources. Depending on the nitrogen sources, sophorolipid production pattern varied by increasing C/N ratio. Increased production of sophrolipid could be obtained up to 90g/L by feeding carbon source again 2 days after cultivation.