• Food Science of Animal Resources
• /
• v.30 no.6
• /
• pp.923-929
• /
• 2010

Colostral whey prepared from colostrum (pooled from first six post-partum milkings) was heated for 10 min at $100^{\circ}C$ Heated colostral whey was incubated with 1% enzymes (protein equivalent basis) for 15, 30, 60, 90, and 120 min at $50^{\circ}C$. Papain, pepsin, trypsin, and alcalase produced different degrees of hydrolysis (DH), 10.66%, 12.42%, 10.83%, and 25.31%, respectively, at an incubation time of 120 min. The SDS-PAGE reveals that significant amounts of bovine serum albumin (BSA), ${\beta}$-lactoglobulin (${\beta}$-LG), and ${\alpha}$-lactalbumin (${\alpha}$-LA) survived papain digestion. In contrast, pepsin completely removed BSA but not ${\beta}$-LG present in heated colostral whey. Alcalase completely eliminated BSA, ${\beta}$-LG, and ${\alpha}$-LA. This differential hydrolysis was confirmed by reversed-phase HPLC analysis. Using ion-exchange chromatography, fraction-1 (F-1) was obtained from alcalase hydrolysate at a NaCl gradient concentration of 0.25 M. Reversed-phase HPLC chromatograms of alcalase F-1 showed numerous small peaks, which probably indicate that a variety of new peptides were produced. Iron content of alcalase F-1 was 28.94 ppm, which was the highest among all enzyme fractions, whereas iron content of colostral whey was 36.56 ppm. Main amino acids contained in alcalase F-1 were Thr (15.45%), Glu (14.12%), and Ser (10.39%). Therefore, alcalase can be used to generate good iron-binding peptides in heated colostral whey, and the resulting iron-binding peptides could be suitable as a value-added food ingredient for food supplements.

• Journal of Power System Engineering
• /
• v.20 no.5
• /
• pp.46-51
• /
• 2016

The TMCP steel has expanded in the marine structure during manufacturing process because of its excellent weld-ability and impact toughness. In the case of merchant ships, coverage of TMCP steel has been used widely on over DH36 Classifications material. The line heating process is applied to the outer surface of the steel plate for the shipbuilding. In this study, We compared between TMCP and normalizing steel for shipbuilding by analyzing some basic data through performing the natural cooling after the line heating. The experimental results show the angular misalignment changes in line heating. Heated surface of normalizing steel material expanded to $-0.3^{\circ}$ and reduced to $+0.2^{\circ}$ after cooling. And during cooling at $194^{\circ}C$ for 1,500 seconds, Angular Misalignment began from - direction to + direction, passed the critical point to the default at 2,200 seconds and did not take place any more at $103^{\circ}C$ after the 2,700 seconds. Angular Misalignment results of TMCP steels and Normalizing steel material show same angular misalignment lasted 1,200 seconds, TMCP steel has given more expansion and contraction angle which is $0.2^{\circ}$ than that of the Normalizing steel. Length difference between expansion and contraction is about 0.3 mm.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.32-32
• /
• 2011

Cold Pad batch(CPB)처리에 의한 직물 전처리 공정은 특히 저온처리방식이라 에너지 소모가 적으며, 발생되는 대기오염 및 용수사용량이 연속식 방법에 비해 약 30%이상 절감되는 경제적 친환경적인 기술로 특히 정련과 표백을 동시에 수행할 수 있다. CPB 전처리는 호발, 정련, 표백을 포함하는 공정으로 일욕으로 처리시 패딩, 수세, 와인딩 공정을 단축시키기 때문에 약품 소비량 감소와 에너지 사용 절감 효과가 있어 전 세계적으로 확산되고 있는 Green Technology이다. 본 연구에서는 CPB용 다기능성 일욕형 조제에 개발하기 위해 전처리시 정련, 표백성에 대한 연구를 진행하였다. 시료는 NP/C 교직물을 사용하였고, CPB 처리액은 원료 및 첨가용제를 여러 비율로 조합하여 조제를 formulation 하였다. 이를 사용하여 패딩, 배칭, 수세 및 건조하여 전처리를 하였다. 표백된 정도를 파악하기 위해 Macbeth Color Eye-3100을 사용하여 백도(whiteness(CIE))를 5회 평균값을 구하여 측정 하였다. 정련된 정도를 비교하기 위해 C.I.Reactive Red 238의 2g/l 용액을 사용하여 wicking test를 하였다. 1분간 흡수높이를 측정하여 정련성을 확인하였다. 각각의 첨가용제를 비교한 결과 isopropyl alcohol을 첨가 시 hexylene glycol, butyl diglycol를 첨가한 경우에 비해 높은 흡수높이를 나타내었다. isopropyl alcohol의 농도별 정련성을 알아보기 위해 0%, 5%, 10%의 농도로 처리하였다. 그 결과 isopropyl alcohol 첨가량이 많을수록 정련성이 증가하였다. 다기능성 일욕조제의 문제점인 알칼리 안정성 부족을 보완하기 위해 polyoxyethlylene tridecyl ether derivatieves(LAP300)의 인화물을 첨가하였다. LAP300의 첨가량이 증가할수록 정련성이 증가하는 경향을 나타내었다. 알칼리 안정성 및 타 성능(정련성, 백도, 킬레이트 성)을 종합적으로 평가하여 향후, CPB용 다기능성 일욕형 조제의 개발에 대한 연구를 진행할 계획이다.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.57.4-57.4
• /
• 2019

BITSE is a project of balloon-borne experiments for a next-generation solar coronagraph developed by a collaboration with KASI and NASA. The coronagraph is built to observe the linearly polarized brightness of solar corona with a polarization camera, a filter wheel, and an aperture door. For the observation, the coronagraph is supported by the power distribution unit (PDU), a pointing system WASP (Wallops Arc-Second Pointer), telemetry & telecommand system SIP (Support Instrument Package) which are developed at NASA's Goddard Space Flight Center, Wallops Flight Facility, and Columbia Scientific Balloon Facility. The BITSE Command and Data Handling (C&DH) system used a cost-off-the-shelf electronics to process all data sent and received by the coronagraph, including the support system operation by RS232/422, USB3, Ethernet, and digital and analog signals. The flight software is developed using the core Flight System (cFS) which is a reusable software framework and set of reusable software applications which take advantage of a rich heritage of successful space mission of NASA. The flight software can process encoding and decoding data, control the subsystems, and provide observation autonomy. We developed a python-based testing framework to improve software reliability. The flight software development is one of the crucial contributions of KASI and an important milestone for the next project which is developing a solar coronagraph to be installed at International Space Station.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.282-282
• /
• 2022

Arsenic (As) is a toxic heavy metal that affects the major rice-growing regions of the world and can cause cancer in humans. Rice paddy fields in South Asia are mostly dependent on arsenic-contaminated water sources due to which rice takes up the arsenic from the soil through roots and accumulates it in plant different parts. Here, we present a quantitative trait locus (QTL) mapping study to find out candidate genes conferring As toxicity tolerance in rice (Oryza sativa L.) at the seedling stage. Three weeks old, 120 double haploid CNDH lines derived from a cross between the Indica variety Cheongcheong and the Japonica variety Nagdong and their parental lines were used by treating with 25 μM As. After 2 weeks ofAs stress, 5 traits such as; shoot length (SL), root length (RL), shoot fresh weight (SFW), root fresh weight (RFW), and chlorophyll contents (CHC) were measured. A linkage map of 12 rice chromosomes was constructed from genotypic data DH lines using 778 SSR markers. The linkage map covered a total genetic distance of 2121.7 cM of the rice genome with an average interval of 10.6 cM between markers. A total of seventeen QTLs (LOD>2) were mapped on chromosomes 1, 2, 3, 6, 7, 8, 9, 11, and 12 using composite interval mapping with trait-increasing alleles coming from both parents. Five QTLs for SL, Two QTLs for RL, Five QTLs for SHL, Three QTLs for RFW, and Two QTLs for CHC were detected. The QTLs related to CHC were selected for forther study.

• Korean Journal of Food Science and Technology
• /
• v.26 no.5
• /
• pp.532-538
• /
• 1994

In order to investigate the lowering effects of in vitro enzymatic hydrolysis by the treatment of chymotrypsin, trypsin, pancreatin, or protease from Aspergillus oryzae on the antigenicity of whey protein(WPI) against rabbit anti ${\beta}-LG$ antiserum, competitive inhibition ELISA(cELISA) and passive cutaneous anaphylaxis(PCA) test using guinea pig were performed. The results of cELISA showed that the monovalent antigenicity of the whey protein hydrolysates(WPH) to the antiserum was decreased to $10^{-1.7}{\sim}10^{-4.1}$ and less by the hydrolysis. Especially, the antigenicity of OUP(hydrolysate by protease from Asp. oryzae with preteatment of pepsin) was found almost to be removed. By the heterologous PCA the polyvalent antigenicity of the WPH was decreased to $1/2{\sim}1/128$ and less. Especially, the polyvalent antigenicity of OUN(hydrolysate by protease from Asp. oryzae without preteatments) was found almost to be removed, although OUN did not have so high degree of hydrolysis(DH) or so low monovalent antigenicity (reduced to $10^{-3.2}$). Therefore, this result was assumed to come from effective destruction of antigenic determinants on ${\beta}-LG$ in WPI, not to produce polyvalent antigenic peptides that are closely associated with induction of allergy. This finding suggested that WPH prepared by the treatment of microorganic protease from Asp. oryzae would be a material for hypoallergenic infant formula due to the removal of the polyvalent antigenicity of ${\beta}-LG$, the major milk allergen in WPI.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2000.11a
• /
• pp.407-416
• /
• 2000

국방 부문에 종사하는 관리자들은 국방정보시스템 사업관리에 있어서 최신정보기술에 대한 기본적인 사항은 알고있어야 효율적이고 효과적이며 성공적인 사업관리를 진행할 수 있을 것이다. 국방 부문에 종사하는 관리자들이 저비용 고효율의 국방정보시스템을 건설하고 운영 유지관리 하기 위하여 알아야 할 핵심 및 최신정보기술은 크게 인공지능기술, 멀티미디어 정보화 기술, 가상현실 기술, 시뮬레이션 기술, 텔레프레즌스 기술, 나노테크놀로지 기술, 데이터베이스 기술, 병렬처리 기술, 로봇공학 기술, 소프트웨어 공학에 관련된 기술 등이 있다. 그러나 국방부문에 종사하는 정보통신 전문 인력을 제외한 관리자들이 국방관련 사업관리를 수행하면서 정보기술에 대한 이해 수준이 비교적 낮기 때문에 효율적으로 국방사업을 준비, 계획, 추진하기 어려운 실정이다. 따라서 국방부문에 종사하는 관리자들이 정보기술을 알기 쉽게 이해할 수 있도록 국방부문 핵심지능형정보기술 발전 및 군 활용방안을 이해하기 쉽도록 작성하며 효율적인 사업관리가 이루어질 수 있는 방안을 연구하였다. 본 논문은 국방부문핵심 지능정보기술 식별 및 활용방안을 연구하여 핵심적으로 식별된 사항들을 우리 국방부문의 $C^4$I(지휘, 통제, 통신, 컴퓨터시스템)시스템, 내장형 무기시스템, 각종 교육훈련 정보시스템, 자원관리 정보시스템 등에 어떻게 적용할 것이며 적용시 기대효과는 무엇인가를 제시토록 하여 국방부문에 종사하는 관리자들이 각종 국방사업을 조정, 통제, 확인, 감독, 준비/계획하면서 참고하여 저비용 고효율의 국방관련 각층 사업을 관리할 수 있는 능력을 배양시키도록 연구를 수행하였다. 국방관련 각종 사업을 관리할 수 있는 능력을 배양시키도록 연구를 수행하였다. 국방부문 핵심지능정보기술 발전 및 활용 방안에 포함될 주요 내용을 요약하여 제시하였다.의 경향성을 나타내는 오차 주기(error cyc1e)를 이용함으로써 고객들의 수요의 경향성을 좀 더 세밀한 부분까지 파악할 수 있게 해 준다.ction, secondary electron microscopy, atomic force microscoy, $\alpha$-step, Raman scattering spectroscopu, Fourier transform infrared spectroscopy 및 micro hardness tester를 이용하여 기판 bias 전압이 DLC 박막의 특성에 미치는 영향을 조사하였다. 분석결과 본 연구에서 제작된 DLC 박막은 탄소와 수소만으로 구성되어 있으며, 비정질 상태임을 알 수 있었다. 기판 bias 전압의 증가에 따라 박막의 두께가 감소됨을 알 수 있었고, -150V에서는 박막이 거의 만들어지지 않았으며, -200V에서는 기판 표면이 식각되었다. 이것은 기판 bias 전압과 ECR 플라즈마에 의한 이온충돌 효과 때문으로 판단되며, 150V 이하에서는 증착되는 양보다 re-sputtering 되는 양이 더 많을 것으로 생각된다. 기판 bias 전압을 증가시킬수록 플라즈마에 의한 이온충돌 현상이 두드러져 탄소와 결합하고 있던 수소원자들이 떨어져 나가는 탈수소화 (dehydrogenation) 현상을 확인할 수 있었으며, 이것은 C-H 결합에너지가 C-C 결합이나 C=C 결합보다 약하여 수소 원자가 비교적 해리가 잘되므로 이러한 현상이 일어난다고 판단된다. 결합이 끊어진 탄소 원자들은 다른 탄소원자들과 결합하여 3차원적 cross-link를 형성시켜 나가면서 내부 압축응력을 증가시키는 것으로 알려져 있으며, hardness 시험 결과로 이것을 확인할 수 있었다. 그리고 표면거칠기는 기판 bias 전압을 증가시킬수록 더 smooth 해짐을 확인

• Korean Journal of Microbiology
• /
• v.36 no.3
• /
• pp.196-202
• /
• 2000

A gene for cellulolytic xylanase of Bacillus circulnns ATCC21365 was cloned on pUC 19 in Eschwichia coli. The recombinant plasniid pXLI80 contained an 1.8 id, inselt composed of0.5 kb and 1.3 kb PslI fragments derived from B, circulans. The 0.5 kh fragment in the upstream region of 1.3 kb one was confirmed lo be indispensable for not only expression but also hyperexpression of the cloned gene. The transformant overproduced the xylanase 135 times greater than that produced by the orlginal B circulnns. The optimum pH and temperature of the cloned enzyme we]-e pH 5.2 and $60^{\circ}C$, respectively. Heal pretl-eatment at TEX>$55^{\circ}C$C for 1 Indid not cause inhibition of the activity of this enzyme. The elm.ynie could hydl-olyre CMC and lichenan as well as xylan to produce xylose(or GI), xylohiose(or G2) and xylolnose(or G3) as inah products. Hence We defined the cloned enzyme as a cellulolytic xylanase. The SDS-PAG electrophoretic mobility and zyiiogram of this enzyme derived from whole cell extracts or c~~lture supematants or E. coli(pXL180) indicated a molecular weight of 45,000 and nonprocessing of the enzyme in the peilplasln of E. coli.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.12
• /
• pp.1677-1685
• /
• 2012

The autolysate and hydrolysate of a common squid liver, Todarodes pacificus, were prepared. Autolysis (liver ratio, pH, temperature) and Protamex-treated hydrolysis (pH, temperature, ratio of protease to liver) conditions were optimized by response surface methodology using central composite design for under 1 hr of hydrolysis time. The desirability profile indicated that maximum DH could be achieved at a squid liver of 93.5%, pH 6.4, and $47^{\circ}C$ in autolysis, while that of Protamex-treated hydrolysis did at a Protamex-to-squid liver level of 0.33%, pH 6.0, and $55^{\circ}C$. Three amino acids, proline, cysteine, and methionine, were not detected in the total amino acid composition of the Protamex-treated hydrolysate, while they were detected in the free amino acid composition. Cadmium was $8.32{\pm}0.03$ mg/100 g-powder for raw, $3.56{\pm}0.02$ mg/100 g-powder for the autolysate, and $13.26{\pm}0.04$ mg/100 g powder for the Protamex-treated hydrolysate. The major molecular weight ranged from 1.0 to 1.5 kDa for the autolysate and from 210 to 470 Da for the Protamex-treated hydrolysate. Food functionalities of the autolysate, such as surface hydrolphobicity, emulsion activity index, emulsion stability, water, and fat adsorption, were similar to the Protamex-treated hydrolysate. Both the autolysate and Protamex-hydrolysate showed high inhibitory activities on the angiotensin-I converting enzyme. Cell toxicity against the HepG2 cell line was not detected in the autolysate or the Protamex-treated hydrolysate by 200 ${\mu}g/mL$.

• Plant Journal
• /
• v.12 no.1
• /
• pp.29-36
• /
• 2016

It is becoming increasingly important to make use of alternative energy source. because It is not able to rely on only fossil fuel for the recent increasing demand of energy consumption. With this situation, lots of studies for utilizing low grade energy such as industrial waste heat, solar energy, and geothermal energy have been conducted. The aim of this study is to predict the operation characteristics of working fluid by using performance analysis program (ThermoFlex) through the system analysis which is not mixing district return water but using ORC(Organic Rankine Cycle, hereinafter ORC) as a downstream cycle when accumulating district heating (hereinafter DH). In this study, We conducted the performance analysis for the case which has the district heating water temperature($120^{\circ}C$) and Flow rate of $163m^3/h$ (including District Heating return water flow), and examined several working fluid which is proper to this temperature. The case using R245fa (which is the best-case) showed 269.2kW power output, 6.37% efficiency. Additionally, Cut down on fuel was expected because of the boiler inlet temperature increase by being Formed $57.3{\sim}85^{\circ}C$ in a temperature of district heating return water, depending on a pressure change of a condenser in ORC system.