• 제목/요약/키워드: Bypass scheme

검색결과 40건 처리시간 0.022초

비장착 엔진/나셀 형상에 대한 3차원 Euler 유동 해석 (Calculations of 3D Euler Flows around an Isolated Engine/Nacelle)

  • 김수미;양수석;이대성
    • 한국전산유체공학회지
    • /
    • 제2권2호
    • /
    • pp.51-58
    • /
    • 1997
  • A reliable computational solver has been developed for the analysis of three-dimensional inviscid compressible flows around a nacelle of a high bypass ratio turbofan engine, The numerical algorithm is based on the modified Godunov scheme to allow the second order accuracy for space variables, while keeping the monotone features. Two step time integration is used not only to remove time step limitation but also to provide the second order accuracy in a time variable. The multi-block approach is employed to calculate the complex flow field, using an algebraic, conformal, and elliptic method. The exact solution of Riemann problem is used to define boundary conditions. The accuracy of the developed solver is validated by comparing its results around the isolated nacelle in the cruise flight regime with the solution obtained using a commercial code "RAMPANT. "

  • PDF

Low Power Scheme Using Bypassing Technique for Hybrid Cache Architecture

  • Choi, Juhee
    • 반도체디스플레이기술학회지
    • /
    • 제20권4호
    • /
    • pp.10-15
    • /
    • 2021
  • Cache bypassing schemes have been studied to remove unnecessary updating the data in cache blocks. Among them, a statistics-based cache bypassing method for asymmetric-access caches is one of the most efficient approach for non-voliatile memories and shows the lowest cache access latency. However, it is proposed under the condition of the normal cache system, so further study is required for the hybrid cache architecture. This paper proposes a novel cache bypassing scheme, called hybrid bypassing block selector. In the proposal, the new model is established considering the SRAM region and the non-volatile memory region separately. Based on the model, hybrid bypassing decision block is implemented. Experiments show that the hybrid bypassing decision block saves overall energy consumption by 21.5%.

와이맥스 메쉬 네트워크에서 LSQR 스케줄링을 이용한 QoS 라우팅 성능 향상에 관한 연구 (A Study on QoS Routing Performance Enhancement by using LSQR Scheduling in WiMAX Mesh Networks)

  • 탁우영;이고운;조항기;유인태
    • 디지털콘텐츠학회 논문지
    • /
    • 제14권4호
    • /
    • pp.429-437
    • /
    • 2013
  • 무선 메쉬 네트워크는 확장성이 좋으며 넓은 지역에 서비스가 가능하므로 네트워크 음영지역 해소 및 우회, 분산 경로 구축을 위한 솔루션으로 각광받고 있다. 하지만 메쉬 네트워크는 인프라 기반의 네트워크보다 사용자에게 낮은 QoS를 제공한다. 본 논문에서는 모바일 WiMAX 기반의 메쉬 네트워크에서 라우팅 성능을 향상시키고 QoS를 보장하기위한 LSQR (Load Sensing QoS Routing) 기법을 제안한다. LSQR 기법은 각각의 노드가 네트워크의 혼잡 상황을 인지하여 우회 경로를 선택한다. 이는 대량의 인터넷 트래픽이 발생할 때 centralized link에서 distributed link로 라우팅 경로를 변경하여 효과적인 부하 분산을 기대할 수 있다. NS-2를 이용한 시뮬레이션 결과로부터, 제안한 LSQR 기법이 기존의 다른 대표적인 라우팅 기법에 비해 패킷 손실을 감소하고 동시에 데이터 전송 속도를 증가함을 검증하였다.

핫가스 바이패스 및 압축기 가변속 제어에 의한 공작기계용 수냉각기의 성능 비교 (Comparison of System Performances of Hot-gas Bypass and Compressor Variable Speed Control of Water Coolers for Machine Tools)

  • 정석권;이단비;윤정인
    • 설비공학논문집
    • /
    • 제24권1호
    • /
    • pp.1-8
    • /
    • 2012
  • Recently, the needs of system performances such as working speed and processing accuracy in machine tools have been increased. Especially, the speed increment generates harmful heat at both moving part of the machine tools and handicrafts. The heat is a main drawback to progress accuracy of the processing. Hence, a cooler system to control temperature is inevitable for the machine tools. In general, two representative control schemes, hot-gas bypass and variable speed control of a compressor, have been adopted in the water cooler system. In this paper, comparisons of system performances according to the control schemes in a cooler for machine tools were conducted in detail. Each proportional-integral feedback controller for the two different control systems is designed. The system performances, especially the temperature control accuracy and coefficient of performance which is a criterion of energy saving, were mainly analyzed through various experiments using 1RT water cooler system with different two types of control scheme. These evaluations will provide useful information to choose suitable water cooler system for the engineers who design controllers of the cooler system for machine tools.

비장착 나셀의 역추력기 형상에 대한 3차원 Euler 유동해석 (Performance Evaluation of a Thrust Reverser Using an Euler Solver)

  • 김수미;양수석;이대성
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 1999년도 추계 학술대회논문집
    • /
    • pp.167-173
    • /
    • 1999
  • An Euler-based CFD tool has been developed for the performance evaluation of a thrust reverser mounted on a high bypass ratio turbofan engine. The computational domain surrounded by the ground and non-reflection boundary includes the whole nacelle configuration with a deployed thrust reverser. The numerical algorithm is based on the modified Godunovs scheme to allow the second order accuracy in both space and time. The grid system is generated by using eleven multi-blocks, of which the total cell number is 148,400. The thrust reverser is modeled as if it locates at the nacelle simply in all circumferential direction. The existence of a fan and an OGV(Outlet Guide Vane) is simulated by adopting the actuator disk concept, in which predetermined radial distributions of stagnation pressure ratio and adiabatic efficiency coefficient are used for the rotor type disk, and stagnation pressure losses and flow outlet angles for the stator type disk. All boundary conditions including the fan and OGV simulation are treated by Riemann solver. The developed solver is applied to a turbofan engine with a bypass ratio of about 5.7 and the diameter of the fan cowl of 83 inch. The computational results show that the Euler-based inviscid method is very useful and economical to evaluate the performance of thrust reversers.

  • PDF

큐브 부호화 방식을 사용하는 다단계 상호연결망 기반의 다중컴퓨터에서 고장 허영 멀티캐스팅 (Fault-Tolerant Multicasting in MIN-based Multicomputers using Cube Encoding Scheme)

  • 김진수;박재형;김명균
    • 정보처리학회논문지A
    • /
    • 제8A권2호
    • /
    • pp.99-106
    • /
    • 2001
  • 본 논문에서는 다단계 상호연결망(MIN)을 기반으로 하는 다중컴퓨터에서의 고장 허용 멀티캐스팅에 대해 연구한다. 프로세싱 노드간 일대일 라우팅뿐만 아니라, 효율적인 멀티캐스팅은 다중컴퓨터의 성능에 영향을 주는 중요한 요소이다. 본 논문은 스위칭 소자이 고장을 허용하는 멀티캐스팅 알고리즘을 제안한다. 제안된 알고리즘은 멀티캐스트 목적지들을 표현하기 위해 큐브 부호화 방식을 사용하며, 고장을 우회하기 위해 순환 기법을 기반으로 한다. 이 알고리즘은 다수의 고장 스위칭 소자가 있는 MIN에서 임의의 멀티캐스트 메시지를 두 번 순환시켜 라우팅할 수 있다. 그리고, MIN의 구조적 특성을 이용하여 본 알고리즘의 정확성을 증명한다.

  • PDF

Cost-Effective APF/UPS System with Seamless Mode Transfer

  • Lee, Woo-Cheol
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권1호
    • /
    • pp.195-204
    • /
    • 2015
  • In this paper, the development of a cost-effective active power filter/uninterruptible power supply (APF/UPS) system with seamless mode transfer is described. The proposed scheme employs a pulse-width-modulation (PWM) voltage-source inverter and has two operational modes. First, when the source voltage is normal, the system operates as an APF, which compensates for the harmonics and power factor while boosting the DC-link voltage to be ready for the disturbance, without an additional DC charging circuit. A simple algorithm to detect the load current harmonics is also proposed. Second, when the source voltage is out of the normal range (owing to sag, swell, or outage), it operates a UPS, which controls the output voltage constantly by discharging the DC-link capacitor. Furthermore, a seamless transfer method for the single-phase inverter between the APF mode and the UPS mode is also proposed, in which an IGBT switch with diodes is used as a static bypass switch. Dissimilar to a conventional SCR switch, the IGBT switch can implement a seamless mode transfer. During the UPS operation, when the source voltage returns to the normal range, the system operates as an APF. The proposed system has good transient and steady-state response characteristics. The APF, charging circuit, and UPS systems are implemented in one inverter system. Finally, the validity of the proposed scheme is investigated with simulated and experimental results for a prototype APF/UPS system rated at 3 kVA.

모바일 플랫폼에서 MTM을 이용한 보안영역 제공 및 인증에 관한 연구 (A Study on Providing Secure Storage and User Authentication Using MTM on Mobile Platform)

  • 이선호;이임영
    • 정보처리학회논문지C
    • /
    • 제18C권5호
    • /
    • pp.293-302
    • /
    • 2011
  • 무선 통신 기술의 발달을 통해 스마트폰을 이용한 다양한 정보 서비스를 빠르게 받을 수 있게 되었다. 스마트 폰은 기존에 사용되고 있던 피처폰에 비하여 더 강력한 컴퓨팅 능력을 제공하며, 웹서핑, 문서 편집, 비디오 시청 그리고 게임과 같은 다양한 기능을 제공한다. 스마트폰의 높은 활용성에 따라 수많은 개인정보가 단말기에 저장되고 있으며, 이의 분실 및 도난에 따른 개인정보 유출은 큰 문제가 될 것으로 예상된다. 따라서 본 연구는 기존에 제공되는 스마트폰 모바일 플랫폼의 보안영역 제공 및 인증 방법에 대하여 분석하고 요구사항을 도출하였으며, 보안 요구사항을 만족하는 보안 기술을 제안한다. 제안방식은 인증 우회가 불가능한 보안영역을 제공하며, 보안영역에 접근하기 위해 필요한 정보의 손상으로부터 가용성을 제공한다.

Large Eddy Simulation of Shock-Boundary Layer Interaction

  • Teramoto, Susumu
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2004년도 제22회 춘계학술대회논문집
    • /
    • pp.426-432
    • /
    • 2004
  • Large-Eddy Simulation (LES) is applied for the simulation of compressible flat plate boundary with Reynolds number up to 5 X 10$^{5}$ . Numerical examples include shock/boundary layer interaction and boundary layer transition, aiming future application to the analysis of transonic fan/compressor cascades. The present LES code uses hybrid com-pact/WENO scheme for the spatial discretization and compact diagonalized implicit scheme for the time integration. The present code successfully predicted the bypass transition of subsonic boundary layer. As for supersonic turbulent boundary layer, mean and fluctuation velocity of the attached boundary, as well as the evolution of the friction coefficient and the displacement thickness both upstream and downstream of the separation region are all in good agreement with experiment. The separation point also agreed with the experiment. In the simulation of the shock/laminar boundary layer interaction, the dependence of the transition upon the shock strength is reproduced qualitatively, but the extent of the separation region is overpredicted. These numerical examples show that LES can predict the behavior of boundary layer including transition and shock interaction, which are hardly managed by the conventional Reynolds-averaged Navier-Stokes approach, although there needs to be more effort before achieving quantitative agreement.

  • PDF

Controller Design and By-Pass Structure for the Two-Stage Grid-Connected Photovoltaic Power Conditioning System

  • 이성준;배현수;조보형
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2009년도 정기총회 및 추계학술대회 논문집
    • /
    • pp.206-208
    • /
    • 2009
  • In this paper, a systematical controller design method for a twostage grid-connected photovoltaic power conditioning system is proposed. For a pre-stage boost converter to achieve the stable operation in the entire region of solar array, the digital resistive current mode controller is used. This algorithm is very simple to implement with a digital controller and there is no power stage parameter dependency in the controller design. For a post-stage single-phase full-bridge inverter, a PI controller with a feedforward compensation for the inner current control is employed. Furthermore, in case that the operating point of the solar array under varying environmental conditions is higher than the required voltage for the inverter current control, the bypass mode for the boost converter is possible for the more efficient operation. The proposed control scheme is validated through the experiment of the prototype two-stage power conditioning system hardware with a 200W solar array.

  • PDF