• Korean Journal of Materials Research
• /
• v.11 no.3
• /
• pp.185-190
• /
• 2001

The effect of neutral ligand(L) on the precursor characteristics of (hfac)Cu(I)-L and on Cu MOCVD Process was studied. The neutral ligands of (hac)Cu(I)-L$_{x}$, such as ATMS(allytrimethylsilane), VTMS(vinyltrimethylsilane), VCH(vinylcyclohexane), MP(4-methyl-1-pentene), ACP(allylcyclopentane), and DMB(3,3-dimethyl-1-butene) were investigated. When the dissociation temperature of Cu(I)-L bond is low, low temperature deposition below $100^{\circ}C$ is possible and the resistivity of the film is low. But thermal stability of the precursor is low in this case. The resistivity is almost the same regardless of L at the deposition temperature range of $125~175^{\circ}C$. The resistivity is increased as the molecular weight of L becomes higher above $225^{\circ}C$ The vapor pressure of the precursor was closely related to the boiling point of L, the lower the boiling point of L, the higher the vapor pressurere.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.868-874
• /
• 2013

Efficient synthetic route to novel 2'-spirocyclopropanoid 4'-deoxythreosyl phosphonic acid nucleosides was described from 1,4-dihydroxy-2-butene. Cyclopropane moiety was prepared via ester enolate alkylation using (2-chloroethyl)dimethylsulfonium iodide. Synthesized nucleoside analogues 16, 19, 23 and 26 were tested for anti-HIV activity as well as cytotoxicity. However, none of them showed any anti-HIV activity or cytotoxicity up to 100 ${\mu}M$.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.84-85
• /
• 2007

3,3-Dimethyl-1-butene (C6H12) monomer를 이용하여 RF power와 압력에 따라 막을 증착하였다. 증착된 비정질 탄소막은 power/pressure (W/Torr)가 증가할수록 Raman 스펙트럼에서 D peak가 증가하였고, ring 구조의 막을 형성하였다. 또한 ring 구조의 막이 형성됨으로써 hardness와 modulus는 각각 12 GPa과 85 GPa로 선형적으로 증가하는 것으로 나타났다.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.1003-1007
• /
• 1999

The activity and products distribution for the hydrogenation of butadiene and pentadiene over the gold and cobalt catalysts prepared by coprecipitation and impregnation method was investigated with using a flow reactor under atmospheric pressure. The reaction characteristics of the highly dispersed gold particles and its role were studied. The activity of the gold catalyst by coprecipitation was much higher than that by impregnation. The selectivity of butene on all gold particles was always 100% even in the absence of butadiene in the stream, but butadiene on cobalt supported catalyst was easily hydrogenated to butane. It was therefore considered that the active sites at circumferences of the gold particles possessed an unique property which took a proper affinity to hydrogen. In the hydrogenation of butadiene and pentadiene, the percentages of 1-butene and 2-pentene were 60%~70% and about 62%, respectively. The results could be simply explained by a statistical concepts of hydrogen addition.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.4
• /
• pp.506-510
• /
• 1993

Irradiation of 1,4-diphenylbutadiyne (DPB) with a mixture of electron-deficient and electron-rich olefins in deaerated tetrahydrofuran yields a 1 : 1 primary photoadduct between DPB and electron-deficient olefins. Irradiation of the primary photoadduct of DPB and dimethyl fumarate (DMFu) with various olefins such as DMFu, acrylonitrile (AN), and 2,3-dimethyl-2-butene (DMB) in deaerated tetrahydrofuran yields regiospecific 1 : 1 photoadducts. The electron-deficient olefins are more reactive than electron-rich olefins in the photoreaction which proceeds through excited triplet state.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.10
• /
• pp.1512-1514
• /
• 2005

Catalytic properties of Ni-Zr$O_2$ catalysts prepared by coprecipitation have been studied for the gas-phase hydrogenation of 1,3-butadiene to butenes. The coprecipitation method led to the solid solution of Ni-Zr$O_2$, which contains highly resistant Ni species to thermal reduction with H2. Nickel species of the solid solution were highly dispersed in the ZrO2 lattice, so that the reduced catalysts were selective for hydrogenation of 1,3-butadiene to butenes (99.9%) even in the presence of 1-butene.

• Macromolecular Research
• /
• v.13 no.4
• /
• pp.297-305
• /
• 2005

The compatibilizing effect of maleic anhydride (MA) in the immiscible blends of EVA22 (vinyl acetate content 22%)/ethylene-${\alpha}$-olefin copolymers with 1-butene (EtBC) and 1-octene (EtOC)) comonomers was studied. By adding 1, 2, and 3 phr of MA in the presence of dicumylperoxide, the morphology, tensile strength at break, and 100 and 300 % modulus of EVA22/EtBC and EVA22/EtOC blends were significantly enhanced. The melting point and crystallization point depression were observed upon the addition of MA. The changes in the ${\beta}$ transition and glass transition temperature of ethylene-${\alpha}$-olefin copolymers and ethylene-vinyl acetate copolymers, respectively, indicate that MA plays a role of compatibilizer for these immiscible blends. The TGA thermograms, measured from the blends with MA, show that thermal stability is slightly enhanced with MA, indicating that MA acts as a reinforcing agent either by grafting or crosslinking with other copolymers.

• Journal of Environmental Health Sciences
• /
• v.27 no.2
• /
• pp.43-50
• /
• 2001

This paper reviews the results of a series of efforts to develop structure-activity models for slow-reacting chemicals and olefins whose toxicity may be enhanced by the ultraviolet radiation. Photoinduced toxicity of 14 compounds was found to be a different result of competing factors of structure, having carbon-carbon double bonds. To mimic the biological consequences of photooxidative damage in mammalian cells, the photochemical mutagenicith of 14 chemicals was tested in the CAS. Simple olefins were photochemically mutagenic or carcinogenic with irradiation, increasing the alkylating activity from zero level to 0.87(abs/gram) for styrene, 0.25 for 1-butene, 0.11 for 1-hexene, respectively, whereas no photochemical mutagenicity was observed with 1-octene in the absence of the CAS. Oxide compounds, however, showed a decreasing trend of photoalkylating activities in the presence or absence of the CAS. We found that the structure-activity relationship was not applicable to our data.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.4
• /
• pp.279-282
• /
• 1986

The MNDO calculations were performed in order to investigate the gas-phase reaction mechanism of 2-propene-1-al oxide, as a model compound of dypnone oxide(1,3-diphenyl-2-butene-1-one oxide) with the chloride ion. Optimized geometries and heats of formation for two probable concerted pathways, CHO and H migration, were determined and their activation energies were obtained. MO results show that although the formyl migration is thermodynamically more favorable than the hydride migration, the latter kinetically predominates over the formyl migration, which is contrary to the established migrating preferences. It is concluded that the hydride migratory propensity is catalyzed by the chloride ion by reducing the capability of the carbonyl ${\pi}$ bond to participate in the migration.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.824-830
• /
• 2015

The influence of phosphorous precursors, $NH_4H_2PO_4$, $(NH_4)_2HPO_4$, $H_3PO_4$, $(C_2H_5)_3PO_4$, and $P_2O_5$, on the catalytic performance of the $BiFe_{0.65}MoP_{0.1}$ catalysts in the oxidative dehydrogenation of 1-butene to 1,3-butadiene was studied. The catalysts were characterized by XRD, $N_2$-sorption, ICP, SEM and TPRO analyses. It was not observed big difference on the physical properties of catalysts in accordance with used different phosphorous precursors, however, the catalytic performance was largely depended on the nature of the phosphorous precursors. Of various precursors, the $BiFe_{0.65}MoP_{0.1}$ oxide catalyst, which was prepared from a phosphoric acid precursor, showed the best catalytic performance. Conversion and yield to butadiene of the catalyst showed 79.5% and 67.7%, respectively, after 14 h on stream. The cation of phosphorous precursors was speculated to affect the lattice structure of the catalysts during catalyst preparation and this difference was influenced on the re-oxidation ability of the catalysts. Based on the results of TPRO, it was proposed that the catalytic performance could be correlated with re-oxidation ability of the catalysts.