• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.6
• /
• pp.995-1007
• /
• 1995

The purpose of this study is to examine on breast shapes of elderly women and provide fundamental data for developing brassiere. Numerous anthropometric measurements and other related data from 398 subjects were analyzed by various statistical methods such as ANOVA, Correlation analysis, Factor analysis and Cluster analysis. 1. Analysis of Breast Measurements The subjects were categorized into three groups(Group I; aged 55 to 64, Group II; aged 65 to 74, Group III; aged more than 75). 1) The results of the comparative analysis of anthropometric data from three groups show that by getting older: - $\circled1$ Breast lengths, widths, heights and bust girths are decreased significantly $\circled2$ Various length measurements related to the drooping degree of breast are increased $\circled3$ Some measurements related to the volume of breast are decreased. 2) The results of the correlation analysis among measurement show that there are no directs linear relationships between under bust girth and bust drooping. Further it turned out that the cup size could be used as a factor explaining the volume of breast due to large subject variation, Thus it is required to have more specific information about the breast volume. 2. Analysis of Breast Shapes 1) From 17 measurements, 5 factor were selected as key factors for the factor analysis of breast analysis of breast shapes. The 5 factors are: $\circled1$ Drooping degree of breast $\circled2$ slope between breast and chest, width of bust point $\circled3$ Contours and prominence of breast at the point of front and side $\circled4$ Breast volume $\circled5$ Breast width. 2) We categorized the breast shapes into three types by Cluster analysis. Type 1 is the most common breast shape in elderly women. $\circled1$ Type L: Not too droopy and large breast $\circled2$ Type 2: A little droopy and small breast $\circled3$ Type 3; Very droopy and wide breast

• Journal of Fashion Business
• /
• v.15 no.3
• /
• pp.22-31
• /
• 2011

In this study, to develop a bodice pattern for women aged 18~24 years, statistical analysis was conducted using the body measurements from 2004 Size Korea and wearing test was conducted. As a result, ease of the bust level to set a horizontal line was decided to be 4cm, that of front interscye line 0cm, and that of back interscye line 0.7~1cm. And the line which divides the horizontal baseline into halves set as the side line. The conversion formula for decision of the scye depth line in the pattern is B/6 + 3.3(cm) + ease (2.5cm), and if bust circumference is 91 or more, it should be 21cm, and if bust circumference is 76 or less, it should be 18.5cm. The back neck line width is 7cm, front neck line width 6.5cm(back neck line width -0.5cm), and front neck depth 8cm(back neck line width +1cm). The shoulder slope was set as a slope of the hypotenuse of a right-angled triangle, which went out 15cm out of the shoulder point and went down 6cm, with tan$21.7^{\circ}$. To develop a final research pattern, wearing test was performed on the primary research pattern for 21 women aged 18~24 years. As a result, the research pattern was evaluated to be significantly higher.

• Journal of the Korean Home Economics Association
• /
• v.45 no.9
• /
• pp.37-52
• /
• 2007

This research developed maternity wear designed with a focus on the essential functions necessary for working women and adaptable to their body changes during pregnancy. Through Martin's anthropometry for 201 pregnant women, the size specifications for maternity wear was determined and a dress form was proposed, in order to provide the manufacturer with reference data and a prototype to verify their products' fit and suitability. From a monthly analysis on the body measurements of pregnant women, significant monthly differences and after pregnancy were found in weight, chest girth, bust girth, under bust girth, waist girth, and hip girth. Dress form was designed based on the average body measurements of women in their 6th to 10th month of pregnancy. The standard dimensions in the 8th month were 90cm (chest), 94cm (bust), 86cm (under bust), 97cm(waist: most protruding part on the side), and 99cm (hip). Compared with Japan's MAT-9 (for nine months), chest girth was the same, while the Korean waist girth and hip girth were larger by 2cm and 3cm, respectively. The woven fabric blouse was evaluated as having the best appearance, while the knitted fabric one was judged as being more comfortable it terms of functionality. For the pants, the design details of the lowered waist and curved waist belt were more functional. The tailored jacket was the best design for working women in terms of both looks and functionality. To summarize, maternity wear for working women, unlike general maternity clothes, should be designed with consideration for the wearer's somatotype and activity. Elastic materials were appropriate for functionality and dealing with physical changes. With the increasing of working pregnant women, such trials are expected to continue in this research area in order to develop functional maternity wear with multi-purposes such as breast-feeding, wearability after delivery and shielding from microwave.

• Journal of the Korean Society of Costume
• /
• v.65 no.2
• /
• pp.157-175
• /
• 2015

The study was aimed to develop a torso-type dress form representing body features of the female fashion models in Korea. To fulfill this purpose, 5 female fashion models aged between 20 and 26 having the average body measurements of professional fashion models in Korea were selected and their 3-D whole body scanned data were analysed. The 3-D whole body scanning method enabled to generate a virtual female fashion model within the CAD system by measuring the subjects' body shapes and sizes. In addition, the virtual model's body data led the development of a standard female fashion model dress form for the efficient fashion show preparation. In order to manufacture the real dress form for female fashion models, 3-D printing technology was adopted. The consequent results are as follows: (1) the body measurements (unit: cm) of the developed dress form were: biacromion length, 36.0, bust point to bust point, 16.6, front/back interscye lengths, 32.0/33.0, neck point to breast point, 26.0, neck point to breast point to waist line, 41.5, waist front/back lengths, 34.5/38.5, waist to hip length, 24.0, bust circumference, 85.0, underbust circumference, 75.0, waist circumference, 65.0, hip circumference, 92.0. (2) the body measurements differences between the developed and existing dress forms were highlighted with the body measurements of neck point to breast point and waist to hip length. (3) the body shape features of the developed dress form showed that bust, shoulder blade, shoulder slope, abdomen and back waist line to hip line parts were more realistically manufactured.

• Journal of the Korean Society of Costume
• /
• v.57 no.8
• /
• pp.48-59
• /
• 2007

The purpose of this research is to develop a basic pattern of corset look taking into consideration characteristics of human body and fit, by transforming 3 dimensional information obtained from draping of standard body type of women in their 20s, which constitute the biggest consumer group of corset look in Korea, on the basis of body shape of women best reflecting 3 dimensional characteristics. In order to develop a corset look pattern suitable for standard body type of women in their 20s, wear tests of A, B, and C types of patterns in terms of the bust in the standard body type that bust circumference 86.7cm and chest circumference 87.0cm were evaluated best. Taking into consideration above findings, fer the purpose of developing a corset look pattern having an excellent fit and reflecting characteristics of Korean women in their 20s with standard body type, a corset look pattern was designed with proper ease calculated by draping incorporated, and through alteration and complementation of such a pattern, a study pattern was produced. This study is expected to provide tips for standard body type women in their 20s with smaller bust circumference to choose clothing allowing for a better fit able to make up for weakness of their body, while presenting to clothing makers ways of designing and size-setting in terms of characteristics of body type of these consumers.

• Journal of Fashion Business
• /
• v.7 no.5
• /
• pp.66-82
• /
• 2003

China shows body size differences owing to varied climates, economic development, living standards, and ethnic distribution from region to region. That's why some regional research regarding body sizes is necessary for the advancement of clothing goods into China. Here, the materials of the Chinese standard "GB/T 1335-1997 Clothing Sizes" are analyzed to reveal the somatotypes of Chinese adults. Height, chest girth and waist girth were differently noticed in six areas. 1. The distribution rates of four body types (Y, A, B, C) were diverse in six regions. 2. Regional differences were seen as follows: 1) As for the height of male adults, areas 1(Northeast, Hwabuk) and 2(Central Western) were larger than the national mean. Areas 3(Gwangdong, Gwangseo, Bokgeon), 4 (Unnam, Gwiju, Sacheon) and 5(Downstream Jang River) were rather small. 2) As for the height of female adults, areas 1, 2 and 6 (Midstream Jang River) were larger than the national mean. Areas 3 and 4 were smaller than the average. 3) As for the bust girth of male adults, area 1 was the only area that exceeded the national mean. Areas 3 and 4 turned out smaller than the average. 4) As for the bust girth of female adults, areas 1, 2 and 6 exceeded the national average. The other three areas were lower. 5) As to the waist girth of adult males, areas 1 and 2 exceeded the national average. The other four areas were lower. 6) As to the waist girth of adult females, areas 1, 2 and 6 exceeded the national average. Areas 4 and 5 were lower. 7) In the height, bust girth and waist girth of male and female adults, most regions showed differences in means, regional distribution and regional rates.

• Fashion & Textile Research Journal
• /
• v.21 no.2
• /
• pp.189-202
• /
• 2019

This study develops a bodice pattern for high school girls aged 17 to 19 that use virtual garment simulation. The study developed a bodice pattern based on the fit evaluation result for two selected bodice patterns. The basic formula of the design method based on the result of 3 times of fit evaluation is as follows: waist back $length=stature/8{\times}1.85cm$, waist front length=waist back length+bust/40+0.7cm, front bust girth=bust/2+4cm, back bust girth=Chest/2+3cm, armscye depth=Chest/4+0.5cm, back interscye length=bishoulder length -1.2cm, front interscye length=back interscye length -1.2cm, front neck width=back neck width -0.3cm. The developed bodice pattern used Bishoulder Length as a criteria for the calculation formula of back interscye length, and back interscye length as a criteria for the calculation formula of front interscye length. The fit evaluation showed the relevance of the bishoulder length, front interscye length, and back interscye length based on a comparison of the calculated figure. A bodice pattern with great body suitability and fitness to high school girls was developed through 3D virtual garment simulation that calculated the application of body proportion to width. This study only analyzed the evaluation result of a virtual model only in a representative form; however, a pattern study is also proposed to compare and analyze the design methods of patterns by body type.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.4
• /
• pp.31-40
• /
• 2018

The purpose of this study is to identify the body type characteristics of fashion models by comparing body dimensions and body types of fashion models with ordinary women in their 20s in Korea. To that end, the study selected 71 people, with 28 being female university students in the Seoul area and 43 professional fashion models. One hundred and fifty-seven ordinary woman were selected who ranged from 20 to 29 years old, and 588 women from the 7th Size Korea fit for research purposes. Body measurement items were selected for the direct measurement data for Size Korea, which included 20 items of body size and 10 items of calculation needed for clothing production. The results of the study were as follows. According to the analysis of fashion models and ordinary woman in their 20s, their body size showed significant differences in 25 out of 30 items. The five items that do not show significant differences are bust point-bust point, waist back length, front interscye length, hip circumference-bust circumference, and neck point to bust point to waistline-waist front length. If you integrate the results, the fashion model is much taller than the ordinary woman, has a longer lower body, and has an 8.05 head figure. Also, the fashion model found itself to be the ideal type that ordinary women prefer because of the slimmer waist and bent shape, which is more than that measured in normal women.

• Fashion & Textile Research Journal
• /
• v.19 no.6
• /
• pp.749-758
• /
• 2017

The purpose of the present study is to develop a grading deviation, which is appropriate for the body type of women in thirties, by analyzing the three-dimensional body type. The materials for the study were adopted from the body measurement data of women in the age group of 30 to 39 years old, provided from Size Korea. By reflecting the factor analysis results using the three-dimensional shape measurement, deviations were derived. First, six factors influencing the changes in human body shape were derived as waist-hip length factor, bust-waist shape factor, back protrusion back shoulder factor, bust length factor, shoulder length factor, and frontal waist dart factor. The bust size and height, which can be easily utilized for the top original grading, were used for deriving a regression formula, and the deviation was set in accordance with the result. Second, by applying the deviation which reflects the changes in the body shape, the crimps which were generated due to the application of existing deviation were remarkably reduced, indicating that the grading of the present study is more fitting than the existing one. The deviation derived by the analysis of actual increase and decrease of body size was more fitting than the existing one. This was proved by actual wearing experiment, which represents the significance of this study.

• The Research Journal of the Costume Culture
• /
• v.24 no.2
• /
• pp.233-247
• /
• 2016

The purpose of this study is to propose a specialized clothes-sizing system for elderly (aged 60~79) obese women satisfying the following conditions based on the data from the fifth Korean Agency for Technology and Standards (2004): a Rohrer's index of over 1.6, a BMI of over 25, and a WHR of over 0.85. The lower bodies of elderly obese women tends to be shorter and wider than average. Particularly, their torsos from the chest to the waist tend to be more obese than other areas. According to the KS standards, the clothes-sizing system sets up its size intervals as follows: 5cm in stature, 5cm and 3cm in bust, 3cm in waist, and 3cm in hip. Based on the dualistic distribution of each section, the names of the sections indicating high distribution are suggested. For suit tops, 11 sizes are selected as distributed in the 145-155cm stature section and 91-103cm bust section. For casual tops, nine sizes are selected as distributed in the 145-155cm stature section and 90-105cm bust section. For bottoms, 11 sizes are selected as distributed in the 82-97cm waist section and 91-97cm hip section. According to the KS standards, detailed sizes are suggested in the division of basic and reference areas.