• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1193-1195
• /
• 2008

We propose a novel light guide plate for an edge-lit LED backlight. Properly designed micro-prisms enable light to go out of the LGP in near vertical direction and luminance fluctuations in front of the LEDs to be invisible.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.677-680
• /
• 2008

AiPi technology incorporates an embedded clock and control scheme with a point-to-point bus topology, achieving the smallest possible number of interface lines between a timing controller and source drivers. A 46" AiPi-based 10-bit FHD prototype requires only 20 interface lines, compared to 38 lines for mini-LVDS. The measured maximum data rate per one data pair is more than 800Mbps.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.513-516
• /
• 2007

We introduce a new copolymer alignment film made by bridge-building structure. It is a better film to decrease the image-sticking level in LCD displays. It is noted that the image-sticking was decreased by preventing ion mixing between inter-layers through high hardness. We have investigated the electrical characteristics such as pretilt angle, Residual DC, VHR by changing cure temperature and process delay time conditions of the new alignment film. In this paper, we have investigated the solution for the deep-rooted image defect and incidentally got a contrast ratio improvement by high anchoring force and hardness elevation through the new copolymer alignment film.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.2 no.1
• /
• pp.1-14
• /
• 2007

In this paper we investigated the organization of regional business incubation center itself and that of companies in center and scrutinized the problems and obstacles to take self-supporting administration for both of center and companies in it. We classified the companies operating inside the center into four types according to the formation of organizations analyzed them, and proposed some solutions to enhance their operating abilities to obtain elf- supporting administration.

• Journal of Dairy Science and Biotechnology
• /
• v.36 no.4
• /
• pp.220-225
• /
• 2018

The purpose of this study was to investigate the effect of ultrasonic treatment during probiotics production process on the shelf life and the survival rate. Once Lactobacillus plantarum and Bifidobacterium longum were cultured in edible culture medium, ultrasonic treatment was performed at 100 Hz for 1, 2, 5, 7, and 10 minutes. Ultrasonic-treated L. plantarum HY7715 and B. longum HY8001 were centrifuged, mixed with a cryoprotectant, and lyophilized. The prepared lactic acid bacteria powder was individually packaged. After 6 months, viable cell counts were measured separately under cold storage and room temperature. In vitro digestion experiments were performed to determine the survival rate at digestive tract. As a result, it was observed that shelf life and survival rate were increased compared to untreated control group.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.92-92
• /
• 2018

Silene seulensis Nakai was used as traditional medicines in Korea, we collected plant from demilitarized zone (DMZ). S. seulensis was extracted with 30, 50, and 70% ethanol and partitioned successively with n-hexane, EtOAc, dichloromethane and BuOH. These extracts (30, 50 and 70% ethanol) were evaluated the cytotoxicity on B16F10 and Hacat cell lines. The LC-MS/MS data of each fractions (n-hexane, EtOAc, dichloromethane, and BuOH) were compared with MS library, combined with ultraviolet/visual (UV/Vis) and MS data for faster determine structure by database search results. This led to the identification of four compounds (1-4) from S. seulensis. These compounds was isolated first time from S. seulensis. Their chemical structures are elucidated by combinations of NMR and mass spectrometry techniques.

• Journal of Information Display
• /
• v.9 no.1
• /
• pp.1-5
• /
• 2008

Two new impulsive driving technologies for 120Hz liquid crystal display (LCD) panels are proposed to improve moving picture quality. One technology generates the dark frame using an adder and a shifter simply without using any look up tables (LUTs). It results in a cost effective impulsive scheme with motion picture quality comparable to that of high speed driving. The other is a backlight flashing method designed to avoid ghost images. The issue of ghost images caused by the slow response time of liquid crystal (LC) is solved by means of 120Hz overdriving and 120Hz backlight flashing. Using the perceived blur edge time (PBET) metric, measured moving picture response time (MPRT) values were 10.8ms and 4.4ms, respectively, while that of 120Hz high speed driving was 10.1ms.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.4
• /
• pp.221-228
• /
• 2005

In this work, our goal is to develop a fast and accurate power model of the ARM926EJ-S processor in the industrial design environment. Compared with existing work on processor power modeling which focuses on the power states of processor core, our model mostly focuses on the cache power model. It gives more than 93% accuracy and 1600 times speedup compared with post-layout gate-level power estimation. We also address two practical issues in applying the processor power model to the real design environment. One is to incorporate the power model into an existing commercial instruction set simulator. The other is the re-characterization of power model parameters to cope with different gate-level netlists of the processor obtained from different design teams and different fabrication technology.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2006.04a
• /
• pp.155-161
• /
• 2006

These days, ubiquitous and RFID are often mentioned by mass media. This piper will introduce RFID-aided Baggage Tracking System that has been implemented under a government project, identify areas for improvement based on the up-to-date operation, and finally a research and development approach to address the issues. The document will also discuss mobile RFID R&D business that our research center is carrying out, and suggest technical requirements for successful RFID business from perspective of corporate research center. Last but not least it will talk about some opportunities that require cooperation among the govement, business and academy to ensure the relevant industry advances RFID business in Korea.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.3
• /
• pp.109-114
• /
• 2005

The founding purpose of Business Incubation System is to induce those businessmen who have technology and promising business ideas but are lacking fund, information, and management skill, and to speed up their business establishment and enhance the level of success by providing them with managerial knowledge, production technology, design, and equipment. While some universities made Business Incubation Center to achieve the above purpose, some other universities, especially the local ones, believed that Business Incubation Center, if managed successfully, could be an accelerator picking up the sluggish local economies. This study studied the motivators that let them move in an Incubating Center, their request for support, their level of expert utilization, and the role of head of a Center. This study found a significant level of correlation among the variables such as industrial-educational cooperation, the development of common items, utilization of professors with matching majors, utilization of research professors, and transfer of technology.