• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4367-4373
• /
• 2010

The purpose of this study was to compared the effectiveness of erector spine taping and lumbar taping maintained in bus driver's back pain. The research subjects were some bus drivers working in Changwon, Masan, and Busan terminal. And we concluded this research; By selecting a group of 15 people taping erector spine, a group of lumbar taping, and a control group of 15 people randomly. Because we measured them before treatment and two weeks after treatment by the time, we could get the results which were as follows. The experiment group applied of taping therapy would be reduced in back pain when compared to the control group. The experiment group applied of taping therapy would be improved in muscle flexibility when compared to the control group. After treatment, the experiment group compared to control group showed decrease pain and an increase of flexibility. In conclusion, we could know that taping reduces back pain of bus drivers and gives a positive impact to muscle flexibility improvement, we finded out a distinct difference between the erector spine taping and the lumbar taping. Thus, the taping treatment can be applied easily to the bus driver and used as a way of therapeutic approach.

• The Korean Journal of Vision Science
• /
• v.20 no.4
• /
• pp.505-511
• /
• 2018

Purpose : This study investigated the visual functions of drivers aged over 65 year olds and drivers aged 50~65 year olds. In addition, difference of visual functions between professional drivers and normal drivers were investigated. Methods : Forty Driver aged over 65 year olds and 67 drivers aged less than 67 year olds were participated. All participants had more than 5 years of driving experiences and had no ocular pathology. Demographic data(gender, job, age, body condition) and visual functions such as contrast sensitivity(CS), stereopsis, glare recovery time and discomfort glare index were measured. Results : Constrast sensivity under photopic condition was higher with bus driver group. In addition, difference of CS at 12cpd and 18cpd were signifcantly different between normal drivers(1.57) and bus drivers(1.70) (p<0.05). There was no significant difference for glare recovery time, despite of trend of longer recovery time with age. Discomfort glare index was significantly different that normal drivers with more than 65 year olds had 3, taxi and truck driver presented almost 5 index score (p<0.05). Conclusion : Analysis of visual function of elderly drivers, it was confirmed that their visual functions decreased with age. Therefore, visual function tests such as CS, discomfort glare index and stereopsis in addition to current available test may need to be considered for drivers aged over 65.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.373-375
• /
• 1997

In this paper, we present IGBT VVVF inverters as a 1C1M propulsion system for electric car. These inverters are composed of high power IGBT's and controlled by compact control units. The control unit performs full digital control by using 32bit DSP and microcontroller. By using CAN-bus, high speed network is constructed within four control units. The stack is simplified and optimized by using plate bus and IGBT driver units of hybrid-type.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.1
• /
• pp.153-161
• /
• 2002

This paper develops a finite element model for crashworthiness analysis ova small-sized bus. The full vehicle finite element model is composed of 31,982 shell elements,599 beam elements,42 bar elements, and 34,204 nodes. The model uses four material models (such as elastic, elastic-plastic(steel), rigid. and elastic-plastic (rubber) material model) of PAM-CRASH. The model uses four contact types to define sliding interfaces in ten areas. A frontal crash test using an actual vehicle with 30mph velocity to a rigid barrier is carried out. Vehicle pulses at lower part of left and right b-pillar are measured, and deformed shapes of frame and driver seat's lower left area are photographed. A frontal crash simulation using the developed full vehicle finite element model is performed with PAM-CRASH installed in super computer SP2. The simulation is performed with the same conditions as the test. The measured vehicle pulses and photographed deformed shapes from the test are compared to ones from the simulation to validate the reliability of the developed model.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.112-114
• /
• 2004

최근 인터넷과 전자기기 및 컴퓨터 시스템 기술의 발달에 맞물려 컴퓨터, 이동전화, 셋탑박스, 디지털 TV, 개인 휴대 단말기 등 정보단말기의 네트워크화가 급진전되면서 임베디드 리눅스가 IT분야의 새로운 관심사로 부상하고 있다. 리눅스는 오픈 소스로서 가격 경쟁력을 확보할 수 있으며, 공개된 장치 드라이버와 응용프로그램의 재사용이 가능하고, 오픈 소스 공동체를 통해 문제를 쉽게 해결할 수 있을 뿐 아니라 쉘, 파일 시스템을 이용하여 편리한 개발 환경을 제공해 주는 이점이 있다. 본 논문에서는 리눅스 운영체제를 디지털 TV에 이식하기 위해 크로스 컴파일 환경과 커널을 빅 엔디언(Endian)으로 변경하고, 커널 구동에 필수적인 장치들을 재설계함으로 리눅스 커널을 디지털 TV에 맞게 최적화함으로써 임베디드 리눅스 운영체제를 설계하였다. 또한 디지털 TV에서의 시스템 장치 제어를 위하여 I2C Bus Interface 디바이스 드라이버를 작성하였다.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.382-385
• /
• 2003

Introduction of digital broadcasting service does not only mean the change of information transmission method but also the change of total broadcasting system. In past day, Television was only received one-sided information from broadcasting station, but digital broadcasting means that digital television becomes the most important means of information transmission by the introduction of new programming, lots of channels, data service, multi communication. In the age of the digital broadcasting, the recording and replay medium's interest is getting higher. The medium is able to record more than 24 hours' digital broadcasting programs without additional tapes. In this paper the recording and replay device using HDD was implemented and device driver based on linux was programmed. It has Intel PXA250 processor and hard disk is used as storage equipment. And transport Stream is saved on hard disk through PXA250's data bus. FIFO is added to solve the different saving speed and FPGA is also added to display the saved data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.33-42
• /
• 2011

The types of the accidents caused by intra-city buses and the changing tendencies of driving attitudes are analyzed before-and-after semi-public management system of intra-city bus system is implemented. On the basis of analysis, the measures on the decrease of traffic accidents are considered and the results are as follows. First, it showed that the traffic accidents decreased generally as a result of definition of the progresses of traffic accidents of intra-city buses before-and-after the system is implemented and with the passing of time after the system was operated. Second, the factors which influence the decrease of traffic offenses before-and-after semi-public management system of intra-city bus are the decease of violation, safe driving duty and the job security. Also the cause which mostly influence to the decrease of traffic accidents is defined. Finally, the measures of decrease of traffic accidents are arranged and proposed as a result of PROXSCAL method.

• Composites Research
• /
• v.21 no.1
• /
• pp.22-29
• /
• 2008

This paper presents the evaluation of crashworthiness and rollover characteristics of low-floor bus vehicles made of aluminum honeycomb sandwich composites with glass-fabric epoxy laminate facesheets. Crashworthiness and rollover analysis of low-floor bus was carried out using explicit finite element analysis code LS-DYNA3D with the lapse of time. Material testing was conducted to determine the input parameters for the composite laminate facesheet model, and the effective equivalent damage model for the orthotropic honeycomb core material. The crash conditions of low-floor bus were frontal accident with speed of 60km/h. Rollover analysis were conducted according to the safety rules of European standard (ECE-R66). The results showed that the survival space for driver and passengers was secured against frontal crashworthiness and rollover of low-floor bus. Also, The modified Chang-Chang failure criterion is recommended to predict the failure mode of composite structures for crashworthiness and rollover analysis.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.10
• /
• pp.977-981
• /
• 2015

We propose a method for the implementation of an EtherCAT communication bus in a Linux-based open source Computerized Numerical Control (CNC) system. Recently, increasingly more CNC systems support real-time Ethernet protocols such as EtherCAT, which is a high-performance industrial communication protocol. For real-time CNC control over an Ethernet-based protocol, an additional layer driver needs to be implemented between the CNC system and the master of industrial communication protocol. Among the various solutions for the connection layer driver, we employ a Hardware Abstraction Layer (HAL) driver based on Linux. The operation of the implemented CNC system is demonstrated and confirmed by Hal Meter, which is used to observe the pins, signals, or parameters of HAL.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1407-1413
• /
• 2011

This paper studied on the VVVF Inverter for 1C4M propulsion system of railway traction. The paper includes the comparison along a VVVF Inverter electric power conversion element for an electric railcar(GTO, IGBT). These inverters are composed of high power IGBTs and controlled by compact control units. The stack is simplified and optimized by using plate bus and IGBT driver units of hybrid-type.