• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.58-63
• /
• 2003

This study shows the functional contribution into the public transportation system for congestion area. And there is a introduction for the rapid bus transit developed in Europe community. It can be classified the public transportation as urban transit, subway and bus. For a few years, it has been introduced the AGT system as a role of the alternative and lengthening system of subway line. Recently, there is going on construction of AGT system in some regional cities. The AGT system has advantages in terms of accessibility and cost-effective rather than subway. But the bus system is advantageous at the points rather than AGT system. It is obvious that the bus system is most cost-effective for infrastructure and system rather than any other public transports. If the bus system has punctuality and precise docking, that becomes best choice for public transportation scheme. There are tries to develop new systems by means of the f1les up the advantages in bus and AGT system, which can be classified as BRT(Bus Rapid Transit}. The idea is simple; 'Thirik rail, use advanced buses.' It is introduced the IRISBUS system at this article, which was developed in Europe community. And it is introduced the project architecture to develop the similar system to IRISBUS in KRRI through National Transportation Key Technology R&D Project

• The Journal of Information Technology
• /
• v.8 no.1
• /
• pp.83-93
• /
• 2005

This paper again to present position of a bus that is running in bus government organization small grasp and Can instruct control about the vehicles progress speed in government organization small to bus driver. Therefore, Inform a bus that own wants to ordinary people who carry transfer communication terminal is situated to where present, ad Do by purpose that offer system that inform running information of a bus to ARS and FAX, internet and ordinary people through PC communication. Also, Intelligence style bus control system that see also includes function that do as can guide arrival expectation depot automatically without driver's manufacturing when run a bus.

• Journal of Korean Society of Transportation
• /
• v.5 no.2
• /
• pp.5-18
• /
• 1987

Buses arrive at a traffic intersection later than passenger cars by the amount of dwell time at previous bus stops. This late arrival of buses affects the total passenger delay at intersections especially in the street carrying large bus volume. The bus progression signal system in which the signal offset is given in favor of bus platoons was applied in the case area of Kangnam street in Seoul, and various effects were analyzed using the TRANSYT-7F simulation model. It was observed that the total passenger delay can be reduced significantly if the bus progression signal system is applied, and the most effective bus priority treatment is proved to be the bus progression signal system installed with exclusive bus lanes.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.3
• /
• pp.63-72
• /
• 2014

The exchangeable battery electric bus is an eco-friendly public transportation vehicle. Due to the technological limitation, however, it should repeatedly change batteries with charged ones. The unmanned battery exchangeable electric bus being studied in Korea can exchange batteries automatically by using a battery swapping system. In this paper, we propose an unmanned battery exchangeable electric bus management system. The proposed system provides two services: the bus information service and the battery change scheduling service. The bus information service is the existing traditional metropolitan area bus information systems, which inform bus passengers how long they should wait for the buses. Our second service assigns a low-battery bus, which needs to change the batteries, to the battery swapping system, which stores fully-charged batteries. To validate the proposed system, we model the system by using the DEVS formalism. The simulation result shows that the proposed system provides the services properly.

• Journal of Digital Convergence
• /
• v.8 no.4
• /
• pp.19-33
• /
• 2010

As one of the most traffic devices, bus has played a great role in Korea for the last years. However, a great many peoples in big cities have continually decreased with the increase of private car ownership. It causes lower quality of bus service and unstability of operation in many bus companies. In the several local government, the operation system of bus was changed to Bus Quasi-Public Operating System. The aim of this study is to assess the effects and to suggest improvement strategies of Bus QPOS. According to the results of the analysis, Bus QPOS has brought various positive effects, but it has occurred negative effects, especially a much increase of government subsidies to bus company. To resolve a negative effects, government should examine the whole condition of bus operations. This study suggests strategies to improve Bus QPOS, which is including transparency of management, fair assessment system, standard cost system for bus operations.

• Journal of Power Electronics
• /
• v.9 no.3
• /
• pp.447-455
• /
• 2009

The power supply systems, which require low-voltage / high-current output has been changing from the conventional centralized power system to a distributed power system. The distributed power system consists of a bus converter and POL. The most important factor is the system stability in bus architecture design. The overlap between the output impedance of a bus converter input impedance of POL causes system instability and has been an actual problem. By increasing the bus capacitor, the system stability can be easily improved. However, due to limited space on the system board, the increasing of bus capacitors is impractical. An urgent solution of this issue is strongly desired. This paper presents the output impedance design for on-board distributed power system by means of three control schemes of a bus converter. The output impedance peak of the bus converter and the input impedance of the POL are analyzed and then conformed experimentally for stability criterion. Furthermore, the design process of each control schemes for system stability is proposed.

• Journal of Korea Multimedia Society
• /
• v.15 no.2
• /
• pp.281-289
• /
• 2012

The goal of our research is to develop more effective bus information system using user generated information and social tagging. In this research, we have developed a smartphone-based bus guide system using social tagging and awareness of location. It will guide users to the nearby bus stops and provides users with information about the bus lines at the bus stops. Information around bus-stops can also be registered as tags into the system by users and can be utilized for bus information service. Simple keyword search utilizing tagging information can provide users with bus information about destinations.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.250-257
• /
• 2018

In this paper, a smart bus system that automates public bus traffic payment by applying beacon and computer vision and provides bus route information, real-time location information, getting off alarm is proposed. By using the beacon to recognize busses near the stop and to board the bus to be boarded, this system automatically processes the payment when boarding by using the distance from the beacon and the information provided by the beacon and the face comparison. After the payment processing, the system provides the route information of the boarded bus and the real-time bus location information to the user, and when the user sets an alarm using these informations, the alarm is activated when the bus leaves the bus stop.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.6
• /
• pp.138-144
• /
• 2010

If the vibration is occurred in a large-sized bus roof, it makes people annoying and complaining the quality of a large-sized bus. So in design stage, it must be considered. To assess vibration at the roof which is equipped with air conditioner in design stage, finite element model is constructed. Computer simulation analysis and experimental method are performed. The dynamic characteristics of the large-sized bus are found by using eigenvalue method. It is related with dynamic behavior. The running conditions of a large-sized bus are velocity and road condition which followed experimental conditions. And the frequency response of a large-sized bus is well correlated with analysis result. Modal participation method is used for finding major modes at each peak. Using this method, we found that front and rear suspension system, engine mounting system and roof structure are the major reasons of the roof vibration. To reduce vibration level of roof in a large-sized bus, spring stiffness of front and rear suspension system, spring stiffness of engine mounting system and roof structure are properly combined. From this study, the vibration characteristics of the roof structure of a large-sized bus can be to a satisfactory level.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.518-521
• /
• 2018

As public transportation use increases, studies are being conducted to consider user convenience using IoT data collected via the bus information system. A low-floor bus means a bus that is designed to be 20 cm lower than a normal bus and can be wheelchair-accessible. However, the system in which the transportation weak is provided to use the low-floor bus is less than the system provided to the general user. In order to use the low-floor bus smoothly, as in the case of the general user, the service system for the weak driver is needed. In this paper, a low - floor bus reservation system is designed to provide a service for low - rise bus users to conveniently use low - floor buses.