• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1098-1100
• /
• 2005

The floorplanning problem is an essential design step in VLSI layout design and it is how to place rectangular modules as density as possible. And then, as the DSM advances, the VLSI chip becomes more congested even though more metal layers are used for routing. Usually, a VLSI chip includes several buses. As design increases in complexity, bus routing becomes a heavy task. To ease bus routing and avoid unnecessary iterations in physical design, we need to consider bus planning in early floorplanning stage. In this paper, we propose a floorplanning method for topological constraint consisting of bus constraint and memory constraint. The proposed algorithms based on Genetic Algorithm(GA) is adopted a sequence pair. For selection control, new objective functions are introduced for topological constraint. Studies on floor planning and cell placement have been reported as being applications of GA to the LSI layout problem. However, no studies have ever seen the effect of applying GA in consideration of topological constraint. Experimental results show improvement of bus and memory constraint.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.76-91
• /
• 1996

In this paper, we proposed the new medium access control protocol for the virtual token bus netowrk. The network is applied to inter-processor communication network of large capacity digital switching system and digital mobile system with distributed control architecture. in the virtual token bus netowrk, the existing medium access control protocols hav ea switchove rtime overhead when traffic load is light or asymmetric according ot arbitration address of node that has message to send. The proposed protocol optimized average message delay using cyclic bus access chain to exclude switchover time of node that do not have message to send. Therefore it enhanced bus tuilization and average message delay that degrades the performance of real time communication netowrks. It showed that the proposed protocol is more enhacned than virtual token medium access control protocol and virtual token medium access control protocol iwth reservation through performance analysis.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.637-640
• /
• 2005

In the development of a electronic system for a optical payload comprising mainly EOS(Electro-Optical Sub-system) and PDTS(Payload Data Transmission Sub-system), many aspects should be investigated and discussed for the easy implementation, for th e higher reliability of operation and for the effective ness in cost, size and weight as well as for the secure interface with components of a satellite bus, etc. As important aspects the interfaces between a satellite bus and a payload, and some design features of the CEU(Camera Electronics Unit) inside the payload are described in this paper. Interfaces between a satellite bus and a payload depend considerably on whether t he payload carries the PMU(Payload Management Un it), which functions as main controller of the Payload, or not. With the PMU inside the payload, EOS and PDTS control is performed through the PMU keep ing the least interfaces of control signals and primary power lines, while the EOS and PDTS control is performed directly by the satellite bus components using relatively many control signals when no PMU exists inside the payload. For the CEU design the output channel configurations of panchromatic and multi-spectral bands including the video image data inter face between EOS and PDTS are described conceptually. The timing information control which is also important and necessary to interpret the received image data is described.

• Journal of Korea Multimedia Society
• /
• v.3 no.3
• /
• pp.234-240
• /
• 2000

In this paper, we propose the method in which a stream of multimedia data simultaneously transfers to the main memory and the multimedia processor from the network interface card using a conventional system bus. The proposed method can reduce the input/output time of multimedia data and improve the data stream in the system bus. Also, we compared the number of system bus accesses, bus cycles and data transmission time to the number of participants between the proposed method and the conventional methods in the multi-party video conference systems. The comparison results of performance anticipate that the number of bus accesses of the proposed method was reduced by 50%, and the total transmission time was reduced by 75% as much as the conventional method regardless of the relation of the participant numbers.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.12
• /
• pp.505-513
• /
• 2006

One of the major reasons for recent blackout, like August 14, 2003 blackout in the US and Canada has been insufficient voltage/reactive power support. For the stable reactive power management, a new approach for the voltage monitoring and control structure is required in the market environment. This paper proposes the effective localized-voltage control scheme using the information from pilot buses at each zone. In this paper, the steady state voltage monitoring and control (SSVMC) is adopted and illustrated for the voltage control scheme during steady state because it is thought as the systemic algorithm to explain voltage profile phenomenon before and after contingencies. And the concept of electrical distance is applied to simultaneously achieve both clustering the voltage control zone, and selecting the pilot bus as the representative node at each control zone. Applying SSVMC based on the structure with clustering and pilot bus enables system operators to monitor and understand the system condition much more easily, to monitor and control the voltage in real-time more manageably, and to respond quickly to a disturbance. The proposed voltage control scheme has been tested on the IEEE 14-bus system with the numerical analysis to examine the system reliability and structure efficiency.

• Journal of the Korean Society for Railway
• /
• v.14 no.5
• /
• pp.461-469
• /
• 2011

Considering the traffic condition of railroad 'KTX' links to lack of service's punctuality in nation's small/ medium cities, design guidelines with practical railroad transportation policies in terms of convenient railroadbus connection and improving comfortable ride is suggested. Following the guideline and policies, operational requirements of current railroad-bus connection system, the system's design consideration, and transportation policies and laws in relation to the bus operating companies should be analyzed to decide the practicality of the railroad-bus connecting infrastructure. Also, in order to achieve practical railroad-bus connection, connecting buses' design guideline is combined with suggested optimization method of the practicality transportation system. Lastly, the design guideline of buses as 'links,' and railroad transportation policies concerning the operation of connecting bus system for nation's small/medium cities are suggested.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.106-107
• /
• 2018

Since Many person go to work or get off, it is difficult to use the public transportation comfortably on the morning or the evening. In this paper, we implement the passenger notification system on the bus using the NFC. The implemented system counts the number of passengers with the NFC reader for the fare. The user is able to find out the crowds of the bus transferred from the server before hop-in.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.175-177
• /
• 2022

This paper introduces a system that assists the blind to move to their destination, and compares the performance of 3-types of deep learning network (DNN) used in the system. The system is made up with a smartphone application that finds route from current location to destination using GPS and navigation API and a bus station installation module that recognizes and informs the bus (type and number) being about the board at bus stop using 3-types of DNN and bus information API. To make the module recognize bus number to get on, We adopted faster-RCNN, YOLOv4, YOLOv5s and YOLOv5s showed best performance in accuracy and speed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.1
• /
• pp.86-91
• /
• 2014

In the field of shipbuilding and marine, electrical power system is that each of the distributed bus bars is connected electrically. In this way, it would be appropriate to recognize as grid-connecting rather than the redundant bus. Short-circuit capacity of the electric power system will be increased proportionally which is due to the addition of the bus. The increase of short-circuit capacity needs high initial cost associated with equipment and can generate the blackout when the equipment with a physically connected to the bus occurs the electric failure. In order to solve these problems, marine electrical power system in which current limiting reactor has been applied is classified according to the network topology, bus network, star network and ring network. And short circuit analysis for each network is performed by the fault types. The results are presented pros and cons compared to each other.

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.41-51
• /
• 2008

As the local bus service diagram after the bus route reform is studied by variable analysis based on traffic card data and income adjustment data, the characteristic of the local bus system is revealed in Busan Metropolitan city. The relationship between traveling length and traveling time is influenced by traveling velocity. In order to keep a headway within 10 minutes, bus service number per minute should be over 0.1013 vehicles. The traveling time of afternoon is generally longer than that of forenoon. Compared with the bus used by a lot people, the deviation of that used by a few people is larger in the all cases of length, headway, time and velocity. According to the analysis of the relationship among card trip number, average income and transfer rate, the relationship between card trip number and average income is expressed as linear function in the general bus and as exponential function in the high-grade & rapid bus. The 1% increase of transfer rate is equal to 6.3 trip/vehicle/day decrease and 4.9 trip/vehicle/day decrease in two bus types respectively. The four effective variables are defined by the discriminant analysis between the profitable routes and the unprofitable; According to discriminant size, bus service number per km, bus via suburb, subway meeting number, bus via university. In order to increase the income when the minibus will be included among public transit transfer system in 2008, it should be necessary to settle the bus network and revitalize the public transit better. In order to decrease the cost, it should be necessary to reorganize the hierarchy between the local bus and the minibus better.