• International Journal of Highway Engineering
• /
• v.19 no.4
• /
• pp.1-7
• /
• 2017

PURPOSES : This study aims to improve complex modeling of multivariable, nonlinear, and overdispersion data with an artificial neural network that has been a problem in the civil and transport sectors. METHODS: Deep learning, which is a technique employing artificial neural networks, was applied for developing a large bus fuel consumption model as a case study. Estimation characteristics and accuracy were compared with the results of conventional multiple regression modeling. RESULTS : The deep learning model remarkably improved estimation accuracy of regression modeling, from R-sq. 18.76% to 72.22%. In addition, it was very flexible in reflecting large variance and complex relationships between dependent and independent variables. CONCLUSIONS : Deep learning could be a new alternative that solves general problems inherent in conventional statistical methods and it is highly promising in planning and optimizing issues in the civil and transport sectors. Extended applications to other fields, such as pavement management, structure safety, operation of intelligent transport systems, and traffic noise estimation are highly recommended.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.240-241
• /
• 2006

Islanding operations of DG usually occur when power supply from the main utility is interrupted due to several reasons but the DG keeps supplying power into the distribution networks. These kinds of islanding conditions cause negative impacts on protection, operation, and management of distribution systems. Therefore, it is necessary to effectively detect the islanding conditions and swiftly disconnect DG from distribution network. This paper proposes the islanding detection algorithm for DG using the change of the voltage unbalance and the output power of DG. The proposed method effectively combines the conventional parameters for detecting the islanding conditions. The proposed methods were verified using the radial distribution network of IEEE 34 bus.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.3
• /
• pp.245-252
• /
• 2016

The Service Platform for going to Kindergarten configured with Beacon Devices, Gateway attached to the BUS, Mobile Communication Network, and Application Server. In this paper, We understand the need for Commuting Kindergarten Services, And interface to Specification of Kindergartener's Beacon Identification, And so design to Gateway Resource Tree Functions. For the Service Interfacing, Commute alerts handled in Parental Cellphone through APP. The Service Platform can check the registered beacon data collection and operation management function.

• Journal of Power Electronics
• /
• v.14 no.4
• /
• pp.733-741
• /
• 2014

The integration of photovoltaic (PV) energy sources into DC grid has gained considerable attention because of its enhanced conversion efficiency with reduced number of power conversion stages. During the integration process, a local control unit is normally included with every power conversion stage of the PV source to accomplish the process of maximum power point tracking. A centralized monitoring and supervisory control unit is required for monitoring, power management, and protection of the entire system. Therefore, we propose a field-programmable gate array (FPGA) based centralized control unit that integrates all local controllers with the centralized monitoring unit. The main focus of this study is on the process of integrating many local control units into a single central unit. In this paper, we present design and optimization procedures for the hardware implementation of FPGA architecture. Furthermore, we propose a transient analysis and control design methodology with consideration of the nonlinear characteristics of the PV source. Hardware experiment results verify the efficiency of the central control unit and controller design.

• The Journal of Bigdata
• /
• v.2 no.2
• /
• pp.1-7
• /
• 2017

Intelligent transportation system (ITS) has been introduced to maximize the efficiency of operation and utilization of the urban traffic facilities and promote the safety and convenience of the users. With the expansion of ITS, various traffic big data such as road traffic situation, traffic volume, public transportation operation status, management situation, and public traffic use status have been increased exponentially. In this paper, we derive structural characteristics of urban traffic according to the vehicle flow by using big data network analysis. DSRC (Dedicated Short Range Communications) data is used to construct the traffic network. The results can help to understand the complex urban traffic characteristics more easily and provide basic research data for urban transportation plan such as road congestion resolution plan, road expansion plan, and bus line/interval plan in a city.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.73-79
• /
• 2012

Because the contact time between satellite and ground station is very limited in LEO (Low Earth Orbit) satellite, all telemetry data generated on spacecraft bus are stored in a mass memory and downlinked to the ground together with real time data during the contact time. The mass memory is initialized in the first system initialization phase and the page status of each memory block is generated step by step. After the completion of the system initialization, the telemetry data are continuously stored and the stored data are played back to the ground by command. And the memory scrubbing is periodically performed for correction of single bit error which can be generated on harsh space environment. This paper introduces the mass memory operation method for telemetry processing of LEO satellite. It includes a general mass memory data structure, the methods of mass memory initialization, scrubbing, data storage and downlink, and mass memory management of primary and redundant mass memory.

• Journal of Family Resource Management and Policy Review
• /
• v.21 no.3
• /
• pp.23-42
• /
• 2017

The purpose of this study was to identify the social networks used by the rural elderly and to analyze the effects of these social networks on the need for life services. The research subjects were 1,000 people aged 65 years and over living in the rural areas of Korea. Among the total 1,000 respondents, 979 elderly who have children were included in this study. The data were analyzed using frequency analysis, descriptive statistics, and multiple regression analysis. The results of this study were as follows. First, the frequency of contact with friends/neighbors was higher than that of children, whereas the social support of children was higher than that of friends/neighbors(excluding physical support). Second, the rate of use of home services and the elderly welfare center was very low. Promotion, a minimum cost burden, convenient transportation (circulation bus operation, etc.), and the provision of visiting services are examples of ways to be using them much more. Third, the elderly who do not live with their children have a higher need for life services. As well unlike the elderly who live with their children, in the case of the elderly who do not live with their children, the necessity for life services was influenced not only by their children but also by the relationship with their friends/neighbors and by home services. This implies that comprehensive social networks are important for the elderly who do not live with their children. Therefore, it is necessary to activate the social support of the community as well as of children and friends/neighbors.

• Journal of Korean Society of Transportation
• /
• v.23 no.2
• /
• pp.75-82
• /
• 2005

To relieve congestion in the current system of intercity transportation, the Korea decided in 1990 to construct a high-speed railroad between Seoul and Busan and it is now in operation. This new mode of transportation significantly cut travel time between major cities and a trip from Seoul to the southeastern port of Busan. Since the KTX opening, average daily passenger numbers on both the Gyeongbu and Honam lines have increased about 1.3 fold over 2003 levels. As of December 2004, the KTX trains are carrying about 81,000 people a day. On KTX routes, the daily number of airline passengers dropped. Express long-distance bus traffic also dropped by 20% to 30%, while that on short-distance routes (100km or less) increased by about 20%. These figures clearly indicate that the Korean transportation network is becoming railroad-centric. However, the number of KTX passengers is fewer than anticipated possibly due to the Korean economic downturn and the operation of the KTX will leave many existing Saemaul and Mugunghwa train sets idle, which will be put into operation for areas, not covered by the KTX. When all the existing major lines have been electrified, more high-speed rail services will be phased in using direct connections to maximize operational efficiency. And also, the dual management by KTX and conventional rail will be regarded as the promotion of the benefit of the public.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.4
• /
• pp.360-368
• /
• 2017

This paper proposes the 80-kW high-efficiency bidirectional hybrid SiC boost/buck converter using droop control for DC nano-grid. The proposed converter consists of four 20-kW modules to achieve fault tolerance, ease of thermal management, and reduced component stress. Each module is constructed as a cascaded structure of the two basic bi-directional converters, namely, interleaved boost and buck converters. A six-pack hybrid SiC intelligent power module (IPM) suitable for the proposed cascaded structure is adopted for high-efficiency and compactness. The proposed converter with hybrid switching method reduces the switching loss by minimizing switching of insulated gate bipolar transistor (IGBT). Each module control achieves smooth transfer from buck to boost operation and vice versa, since current controller switchover is not necessary. Furthermore, the proposed parallel control using DC droop with secondary control, enhances the current sharing accuracy while well regulating the DC bus voltage. A 20-kW prototype of the proposed converter has been developed and verified with experiments and indicates a 99.3% maximum efficiency and 98.8% rated efficiency.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.1
• /
• pp.77-85
• /
• 2003

The conversion into a new Local Area Network (LAN) environment without clear analysis of the problems with the conventional LAN environment nay bring about some improvement of performance, but in general, the result would not be as good as expected. Besides, in case new traffic or application programs are added In the near future, traffic overload similar to the past may incur. Therefore, the conversion into a new LAN environment should not only relieve the problems with the conventional environment but also be able to cope with future expansion of the network flexibly. In the present paper, in view of the above, the problems with protocols and traffic that may occur in the Bus-structured 10/100 Mbps shared Ethernet that has been widely used by many institutions are reviewed, and as a case study whether such conversion into a new LAN environment in order to increase the efficiency in the operation, management, and utilization of the network would be proper for the actual operational environment is implemented, and the results are analyzed.