• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3D
• /
• pp.241-246
• /
• 2010

This study is to estimate the link travel time of road networks in urban areas utilizing traffic information which is collected throughout the operation of Bus Information System (BIS). BIS, which applies the hightech information technology to an existing bus system, has been developing and operating in many bodies including the local self-government entities. However, a study to consider the technology trend is relatively rare. Even though some useful traffic informations have been collected throughout the operation of an existing BIS, which set limits to the development of a future service of integrated analysis. Accordingly, in this study, a fundamental research is performed for traffic controls in urban areas and providing a traffic information for driver throughout the estimation of link travel time of road networks. The study is proceeded throughout the data collected from the operation of BIS (Bus Information System). The result showed that the patterns of going through traffic were divided up to 2 in the bus travel time in BIS then estimate two link travel time.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.597-604
• /
• 2014

In this study, we investigate to show the limitations of current bus arrival time estimation model based on each bus route, and to propose a bus arrival time estimation model based on a bus stop to overcome these limitations. Using the characteristic of bus arrival time calculated on travel time between two bus stops, we develop a model to estimate bus arrival times with the data of all buses traveling the same section regardless of bus route numbers. In the proposed model, an estimated arrival time is calculated by weighted moving average method, and verification between observed value and estimated time is performed on the basis of RMSE. Error was reduced by up to 20% compared to the existing models and the data update period was reduced by more than half that is related to the accuracy of bus arrival time information. We expect to solve the following problems with the suggested method: sudden increase or decrease in arrival time of the bus, the difference of the expected arrival times at the same stop between two or more buses having different route numbers, and impossibility of offering information of a bus if the bus is not operated with the designated schedule.

• Journal of Korean Society of Transportation
• /
• v.28 no.1
• /
• pp.125-134
• /
• 2010

It is occurred bus arrival time errors when a bus arrives at a bus stop because of a variety of traffic condition such as traffic signal cycle, the time to get on and off a bus, a bus-only lane and so on. In this paper, bus delay time which is occurred as the result of traffic condition was estimated with Markov Chain process and bus arrival time at each bus stop was predicted with it. As the result of the study, it is confirmed to improve accuracy than the method of bus arrival time prediction with existing method (weighed moving average method) in case predicting bus arrival time using 7 by 7 and 9 by 9 matrixes.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.535-536
• /
• 2006

In the embedded system, external device interface that operates serial protocol with lower speed than the general computers is used commonly. This paper describes I2C bus protocol that is a bi-directional serial bus with a two-pin interface. The I2C bus requires a minimum amount of hardware to relay status and reliability information concerning the processor subsystem to an external device.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.4
• /
• pp.1-10
• /
• 2013

This study was conducted to investigate that bus information was used as an information of travel speed. To determine the travel speed on the road, bus information and the information collected from the point detector and the interval detection installed were compared. If bus information has the function of traffic information detector, can provide the travel speed information to road users. To this end, the model of recognizing the traffic patterns is necessary. This study used simple moving-average method, simple exponential smoothing method, Double moving average method, Double exponential smoothing method, ARIMA(Autoregressive integrated moving average model) as the existing methods rather than new approach methods. This study suggested the possibility to replace bus information system into other information collection system.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.63-74
• /
• 2005

When we introduce the BRT systems, it is very important to decide the operating factors, such as bus-stop locations or headway. If the factors are inappropriate, unessential expenses for the operator and users of the bus line may be caused, and it leads increase of social total cost. So, it is necessary that we consider users' origin and destination of each bus line when we set location of bus-stops and the optimal headway. Meanwhile, Smart Card System was introduced of fare collection for the Public Transportation Reform in Seoul last year. This new card system makes it possible to store up the information about bus operating and passenger's trip link. With these substantial information. we can estimate bus-stop-based O-D table. So, in this thesis, it was studied a systematic methodology to find the optimal location and headway for skip-stop bus system (as a type of first step for BRT). The proposed methodology in this thesis is expected to be useful to effect analysis or setting operating factors for skip-stop bus system in each bus line.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2261-2266
• /
• 2012

The general bus system architecture consists of masters, slaves, arbiter, decoder and so on in shared bus. As several masters can't use a bus concurrently, arbiter plays an role in bus arbitration. In compliance with the selection of arbitration method, The efficiency of bus usage can be determined. Fixed Priority, Round-Robin, TDMA, Lottery arbitration are studied in conventional arbitration method. In this paper, we draw the performance analysis of Fixed Priority, Round Robin, TDMA and Lottery bus arbitration policies due to the data traffic concentration and propose the methods of performance improvement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.2009-2014
• /
• 2012

The general bus system architecture consists of masters, slaves, arbiter, decoder and so on in shared bus. As several masters can't use a bus concurrently, arbiter plays an role in bus arbitration. In compliance with the selection of arbitration method, The efficiency of bus usage can be determined. Fixed Priority, Round-Robin, TDMA, Lottery arbitration are studied in conventional arbitration method. In this paper, we draw the performance comparison of TDMA and Lottery bus arbitration policy developed recently due to farious conditions and propose the methods of performance improvement.

• Journal of Korean Society for Geospatial Information Science
• /
• v.3 no.2 s.6
• /
• pp.199-211
• /
• 1995

Bus, Which is together with subway the main part of public transportation modes in the city, is reviewed for the development of an optimal feeder-bus service area. Based on the IDRISI of GIS package, and taking into account of the convenience of downtown-oriented public transportation users at peak time, a model for the development of feeder-bus service area and a solution and introduced. Major result in this study is as follows: Development is given to a model that is designed to overcome the shortage of the existing models, which has limits in simulating the real situation; Variables were used in combination so that bus and subway route, station spacing, and operating frequency can be determined simultaneously, which enables to elucidate the mutual relationship and the structure in public transportation system. A model for feeder-bus area development is also given applied to determination and opening of subway and urban express bus route and new transportation systems. The model developed in this paper is useful in the case of extension and opening of subway and urban express bus route and new transportation Systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1879-1884
• /
• 2013

The general bus system architecture consists of masters, slaves, arbiter, decoder and so on in shared bus. As several masters can't use a bus concurrently, arbiter plays an role in bus arbitration. In compliance with the selection of arbitration method, The efficiency of bus usage can be determined. Fixed Priority, Round-Robin, TDMA, Lottery arbitration are studied in conventional arbitration method. In this paper, we draw the performance analysis of Fixed Priority, Round Robin, TDMA and Lottery bus arbitration policies due to the data traffic concentration and propose the methods of performance improvement.