• Title/Summary/Keyword: Burst speed

Search Result 92, Processing Time 0.023 seconds

An N-Channel Stop and Wait ARQ based on Selective Packet Delay Strategy in HSDPA Systems (HSDPA 시스템에서 선택적 지연 기반의 N-채널 SAW ARQ)

  • Park Hyung-Ju;Lim Jae-sung
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.30 no.10A
    • /
    • pp.896-905
    • /
    • 2005
  • In this paper, we propose a SPD(Selective Packet Delay) scheme to improve the performance of High-Speed Downlink Shared Channel(HS-DSCH) employing N-Channel Stop and Wait retransmission scheme in High Speed Downlink Packet Access(HSDPA) system. The proposed SPD coordinates packet transmissions according to the channel condition. When the channel condition is bad, packet transmission is forcedly delayed, and the designated time slot is set over to other users in good channel condition. Hence, the SPD is able to reduce the average transmission delay for packet transmission under the burst error environments. In addition, we propose two packet scheduling schemes called SPD-LDPF(Long Delayed Packet First) and SPD-DCRR(Deficit Compensated Round Robin) that are effectively combined with the SPD scheme. Simulation results show that the proposed scheme has better performance in terms of delay, throughput and fairness.

Estimation of the Axial Stress in High-Tension Bolt by Acoustoelastic Method (음탄성법을 이용한 고장력 볼트의 축응력 평가)

  • Chun, Hae-Hwa;Lee, Tae-Hoon;Jhang, Kyung-Young;Kim, Noh-Yu
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.26 no.5
    • /
    • pp.285-290
    • /
    • 2006
  • The evaluation of clamping condition has been regarded as the main issue in the safety-maintenance of the clamped high-tension bolts. For this, this paper proposes a method to estimate the axial stress by measuring the TOF (Time-Of-Flight) of ultrasonic wave, which is based on the acoustoelasticity or the dependency of sound speed on the stress. In this method, however, the variation of sound speed within the range of stress induced under the field condition is very small, and thus the accuracy of the TOF measurement is important. We adopted the phase detection method using tone-burst ultrasonic wave to measure the precise TOF. In order to verify the usefulness of the proposed method experiments are carried out and the results were compared with the stress measured by the strain gage. The results show good agreement with each other, and from these we can conclude that the proposed method is highly useful fnr the evaluation of clamping condition in the clamped high-tension bolts.

CME and radio characteristics of making large solar proton events

  • Hwang, Jung-A;Cho, Kyung-Suk;Bong, Su-Chan;Kim, Su-Jin;Park, Young-Deuk
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.35 no.1
    • /
    • pp.33.2-33.2
    • /
    • 2010
  • We have investigated a relationship among the solar proton events (SPEs), coronal mass ejections (CMEs) and solar flares during the solar cycle 23 (1997-2006). Using 63 SPE dataset, we found that SPE rise time, duration time, and decrease times depend on CME speed and SPE peak intensity depends on the CME earthward direction parameter as well as CME speed and x-ray flare intensity. While inspecting the relation between SPE peak intensity and the CME earthward direction parameter, we found that there are two groups: first group consists of large 6 SPEs (> 10,000 pfu at >10 MeV proton channel of GOES satellite) and shows a very good correlation (cc=0.65) between SPE peak intensity and CME earthward direction parameter. The second group has a relatively weak SPE peak intensity and shows poor correlation between SPE peak intensity and the CME earthward direction parameter (cc=0.01). By investigating characteristics of 6 SPEs in the first group, we found that there are special common conditions of the extremely large proton events (group 1); (1) all the SPEs are associated with very fast halo CME (>1400km/s), (2) they are almost located at disk region, (3) they also accompany large flare (>M7), (4) all they are preceded by another wide CMEs, and (5) they all show helmet streamer nearby the main CME. In this presentation, we will give details of the energy spectra of the 6 SPE events from the ERNE/HED aboard the Solar and Heliospheric Observatory (SOHO), and onset time comparison among the SPE, flare, type II burst, and CME.

  • PDF

Radiation-Induced Soft Error Detection Method for High Speed SRAM Instruction Cache (고속 정적 RAM 명령어 캐시를 위한 방사선 소프트오류 검출 기법)

  • Kwon, Soon-Gyu;Choi, Hyun-Suk;Park, Jong-Kang;Kim, Jong-Tae
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.35 no.6B
    • /
    • pp.948-953
    • /
    • 2010
  • In this paper, we propose multi-bit soft error detection method which can use an instruction cache of superscalar CPU architecture. Proposed method is applied to high-speed static RAM for instruction cache. Using 1D parity and interleaving, it has less memory overhead and detects more multi-bit errors comparing with other methods. It only detects occurrence of soft errors in static RAM. Error correction is treated like a cache miss situation. When soft errors are occurred, it is detected by 1D parity. Instruction cache just fetch the words from lower-level memory to correct errors. This method can detect multi-bit errors in maximum 4$\times$4 window.

Performance Analysis of IEEE 1394 High Speed Serial Bus for Massive Multimedia Transmission (대용량 멀티미디어 전송을 위한 IEEE 1394고속 직렬 버스의 성능 분석)

  • 이희진;민구봉;김종권
    • Journal of KIISE:Information Networking
    • /
    • v.30 no.4
    • /
    • pp.494-503
    • /
    • 2003
  • The IEEE 1394 High Speed Serial Bus is a versatile, high-performance, and low-cost method of promoting interoperability between all types of A/V and computing devices. IEEE 1394 provides two transfer modes: asynchronous mode for best effort service and isochronous mode for best effort service with bandwidth reservation. This paper shows the bus performance and compared the transfer odes first at the link level and then at the application level. For the application level performance, we analyze the bus systems with fixed and adaptive interfaces, applied between the upper layer and the 1394 layer, using polling systems. Also we verifies the analysis models with simulation studies. Based on our analysis, we conclude that the adaptive interface reduces the bus access time and so increases the bus utilization.

A Study on Performance Enhancement of the Rate Scheme for ABR Traffic on ATM Networks (ATM 망에서 ABR 트래픽을 위한 Rate 기법이 성능 향상 연구)

  • Lee, Yo-Seob;Yu, Eun-Jin;Chang, Hyun-Hee;Pang, Hea-Ja;Jun, Moon-Seog
    • The Transactions of the Korea Information Processing Society
    • /
    • v.4 no.10
    • /
    • pp.2605-2614
    • /
    • 1997
  • Recently, we are concerned with effective service according as the demand increase for high speed data service. We can use high speed transfer and multiple traffic service on the ATM networks, so we concentrate on preventive-control method rather than reactive-control one. But it is possible to have low QoS and traffic congestion due to unpredictable traffic and burst traffic. Specially, ATM Forum has discussed to standardization of traffic management of ABR(Available Bit Rate) service. Because ABR traffic controls the flow of traffic using the feedback information and the current status information of cell, it allocates bandwidth systematically and dynamically to the user. In this paper, we propose a new Rate-based flow control scheme which adapted double threshold buffer idea. The double threshold buffer controls the traffic control by establishing two threshold in buffer.

  • PDF

VLSI Design of Interface between MAC and PHY Layers for Adaptive Burst Profiling in BWA System (BWA 시스템에서 적응형 버스트 프로파일링을 위한 MAC과 PHY 계층 간 인터페이스의 VLSI 설계)

  • Song Moon Kyou;Kong Min Han
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.42 no.1
    • /
    • pp.39-47
    • /
    • 2005
  • The range of hardware implementation increases in communication systems as high-speed processing is required for high data rate. In the broadband wireless access (BWA) system based on IEEE standard 802.16 the functions of higher part in the MAC layer to Provide data needed for generating MAC PDU are implemented in software, and the tasks from formatting MAC PDUs by using those data to transmitting the messages in a modem are implemented in hardware. In this paper, the interface hardware for efficient message exchange between MAC and PHY layers in the BWA system is designed. The hardware performs the following functions including those of the transmission convergence(TC) sublayer; (1) formatting TC PDU(Protocol data unit) from/to MAC PDU, (2) Reed-solomon(RS) encoding/decoding, and (3) resolving DL MAP and UL MAP, so that it controls transmission slot and uplink and downlink traffic according to the modulation scheme of burst profile. Also, it provides various control signal for PHY modem. In addition, the truncated binary exponential backoff (TBEB) algorithm is implemented in a subscriber station to avoid collision on contention-based transmission of messages. The VLSI architecture performing all these functions is implemented and verified in VHDL.

Physiologic Phonetics for Korean Stop Production (한국어 자음생성의 생리음성학적 특성)

  • Hong, Ki-Hwan;Yang, Yoon-Soo
    • Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
    • /
    • v.17 no.2
    • /
    • pp.89-97
    • /
    • 2006
  • The stop consonants in Korean are classified into three types according to the manner of articulation as unaspirated (UA), slightly aspirated (SA) and heavily aspirated (HA) stops. Both the UA and the HA types are always voiceless in any environment. Generally, the voice onset time (VOT) could be measured spectrographically from release of consonant burst to onset of following vowel. The VOT of the UA type is within 20 msec of the burst, and about 40-50 msec in the SA and 50-70 msec in the HA. There have been many efforts to clarify properties that differentiate these manner categories. Umeda, et $al^{1)}$ studied that the fundamental frequency at voice onset after both the UA and HA consonants was higher than that for the SA consonants, and the voice onset times were longest in the HA followed by the SA and UA. Han, et $al^{2)}$ reported in their speech synthesis and perception studies that the SA and UA stops differed primarily in terms of a gradual versus a relatively rapid intensity build-up of the following vowel after the stop release. Lee, et $al^{3)}$ measured both the intraoral and subglottal air pressure that the subglottal pressure was higher for the HA stop than for the other two stops. They also compared the dynamic pattern of the subglottal pressure slope for the three categories and found that the HA stop showed the most rapid increase in subglottal pressure in the time period immediately before the stop release. $Kagaya^{4)}$ reported fiberscopic and acoustic studies of the Korean stops. He mentioned that the UA type may be characterized by a completely adducted state of the vocal folds, stiffened vocal folds and the abrupt decreasing of the stiffness near the voice onset, while the HA type may be characterized by an extensively abducted state of the vocal folds and a heightened subglottal pressure. On the other hand, none of these positive gestures are observed for the SA type. Hong, et $al^{5)}$ studied electromyographic activity of the thyroarytenoid and posterior cricoarytenoid (PCA) muscles during stop production. He reported a marked and early activation of the PCA muscle associated with a steep reactivation of the thyroarytenoid muscle before voice onset in the production of the HA consonants. For the production of the UA consonants, little or no activation of the PCA muscle and earliest and most marked reactivation of the thyroarytenoid muscle were characteristic. For the SA consonants, he reported a more moderate activation of the PCA muscle than for the UA consonant, and the least and the latest reactivation of the thyroarytenoid muscle. Hong, et $al^{6)}$ studied the observation of the vibratory movements of vocal fold edges in terms of laryngeal gestures according to the different types of stop consonants. The movements of vocal fold edges were evaluated using high speed digital images. EGG signals and acoustic waveforms were also evaluated and related to the vibratory movements of vocal fold edges during stop production.

  • PDF

Blind Adaptive Equalization of Partial Response Channels (부분 응답 채널에서의 블라인드 적응 등화 기술에 관한 연구)

  • 이상경;이재천
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.26 no.11A
    • /
    • pp.1827-1840
    • /
    • 2001
  • In digital data transmission/storage systems, the compensation for channel distortion is conducted normally using a training sequence that is known a priori to both the sender and receiver. The use of the training sequences results in inefficient utilization of channel bandwidth. Sometimes, it is also impossible to send training sequences such as in the burst-mode communication. As such, a great deal of attention has been given to the approach requiring no training sequences, which has been called the blind equalization technique. On the other hand, to utilize the limited bandwidth effectively, the concept of partial response (PR) signaling has widely been adopted in both the high-speed transmission and high-density recording/playback systems such as digital microwave, digital subscriber loops, hard disk drives, digital VCRs and digital versatile recordable disks and so on. This paper is concerned with blind adaptive equalization of partial response channels whose transfer function zeros are located on the unit circle, thereby causing some problems in performance. Specifically we study how the problems of blind channel equalization associated with the PR channels can be improved. In doing so, we first discuss the existing methods and then propose new structures for blind PR channel equalization. Our structures have been extensively tested by computer simulation and found out to be encouraging in performance. The results seem very promising as well in terms of the implementation complexity compared to the previous approach reported in literature.

  • PDF

A File System for User Special Functions using Speed-based Prefetch in Embedded Multimedia Systems (임베디드 멀티미디어 재생기에서 속도기반 미리읽기를 이용한 사용자기능 지원 파일시스템)

  • Choe, Tae-Young;Yoon, Hyeon-Ju
    • Journal of KIISE:Computing Practices and Letters
    • /
    • v.14 no.7
    • /
    • pp.625-635
    • /
    • 2008
  • Portable multimedia players have some different properties compared to general multimedia file server. Some of those properties are single user ownership, relatively low hardware performance, I/O burst by user special functions, and short software development cycles. Though suitable for processing multiple user requests at a time, the general multimedia file systems are not efficient for special user functions such as fast forwards/backwards. Soml' methods has been proposed to improve the performance and functionality, which the application programs give prediction hints to the file system. Unfortunately, they require the modification of all applications and recompilation. In this paper, we present a file system that efficiently supports user special functions in embedded multimedia systems using file block allocation, buffer-cache, and prefetch. A prefetch algorithm, SPRA (SPeed-based PRefetch Algorithm) predicts the next block using I/O patterns instead of hints from applications and it is resident in the file system, so doesn't affect application development process. From the experimental file system implementation and comparison with Linux readahead-based algorithms, the proposed system shows $4.29%{\sim}52.63%$ turnaround time and 1.01 to 3,09 times throughput in average.