• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.2
• /
• pp.141-152
• /
• 2011

In this study, we extracted effective factors of pipe burst from the status data of water asset, operating data of pressure, volume and etc. and 7 years' pipe burst and repair records. The extracted factors were sorted by each attribution and then a statistical analysis was performed to generate a pipe burst probability function using the logistic regression model. As the result, material, diameter, length, laying year, pressure and road width affected to pipe burst significantly. Especially, in case of small diameter, laying year was most effective factor and in case of steel pipe, external loading was main cause of burst, and in case of cast iron, PE, PC, HP pipes, the deterioration of joint was main cause. The other side, as a result of Hosmer-Lemeshow goodness of fit test the models are turned out significant statistically. Also the classification criteria were determined to minimize the total cost from classification errors, when the predicted probability was more than 18% this pipe could have a chance of burst.

• Journal of Korea Multimedia Society
• /
• v.16 no.9
• /
• pp.1067-1076
• /
• 2013

Known as an important criterion that evaluates performance of future high-speed backbone networks, burst data loss ratio is well-studied in Optical Burst Switching networks. Current literatures mostly focus on reduce burst loss ratio without considering the system stability and link utilization after reducing. In this paper, we propose a novel framework which comes from feedback theoretic to dynamically control burst loss ratio in OBS. The proposed scheme tries to track the pre-set values of burst loss ratio and increases the stability and link utilization degree. The simulation results show that measured burst loss ratio always tracks setup reference with small errors, wavelength channel utilization is increased up to 2% and the system stability is also improved.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.10
• /
• pp.59-66
• /
• 2003

We propose the novel optical burst switching scheme to guarantee a minimum bandwidth for multiple classes. To date, QoS studies on OBS network are capable of differentiating two classes, but have difficulties in providing a minimum bandwidth lot several classes because of lower classes' collision with the highest class bursts in the networks. To solve that problem, in our proposed scheme we assign time zones in a data channel for each class periodically, making one burst have top priority at least its zone. Also, the new burst assembling algorithm, as well as the way of managing data channel, is necessarily proposed to coordinate with the proposed OBS scheme. Through the evaluation, we show that the worst-case end-to-end delay is small enough and the received bandwidth of the lower classes is still assured regardless of the traffic load of the highest class.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.892-901
• /
• 2001

Despite of many advantages over conventional radio paths, application of the Meteor Burst Path in commercial communication system is so far limited to a few extent because of its low duty rate, which is, less than several percent at best. In order to get through maximum number of data bits during the short interval of each burst, which normally lives a fractions of a second, a sophisticated communication protocol is called for. In this paper, author introduces a communication protocol which can effectively locate and fetch burst signal by sending out periodic detection signal from master station and, with minimal delay, switch over to transmission states so as to put as many data bits through the detected burst as the burst length permits. By analyzing time period required for each transaction steps, the author derives optimal packet length for various bursts which assures to get a message string through in minimum delay. According to the analysis, the author proposes a protocol including a routine which automatically accesses average length of bursts at each environment and automatically adapt length of data packet so as to maximize data throughput under Riven burst conditions.

• Investigative Magnetic Resonance Imaging
• /
• v.3 no.1
• /
• pp.13-19
• /
• 1999

MRI imaging provides many benefits such as noninvasive, 3-dimensional imaging capabilities. But it has relatively serious drawback that is the long data collection time, compared with other imaging modality. Many studies have been performed for fast MR imaging. But EPI and SEPI (4-6) are required to expensive hardware. In this paper, we introduce to Burst imaging technique. It can reduce imaging time by use of a mulitple RF excitation technique. Further it is easily implemented to the normal MRI system. But a pixel profile in the conventional burst sequence is so poor that excited area by burst sequence is a small portion of a pixel. This causes poor signal to noise ratio in burst image. therefore frequency sweeping of RF pulse for burst imaging sequence is proposed to improve pixel profile. A burst pulse train is shaped by liner or nonlinear frequency sweeping function so that all the spins within a pixel are excited, thereby improving the signal to noise ratio. It also shows that the pixel profiles are dependent on how frequency sweep is made. Computer simulations with Bloch equation and experimental results obtained using a 1.0 T NMR imaging system are presented.

• ETRI Journal
• /
• v.44 no.2
• /
• pp.274-285
• /
• 2022

Retransmission in optical burst switching networks is a solution to recover data loss by retransmitting the dropped burst. The ingress node temporarily stores a copy of the complete burst and sends it each time it receives a retransmission request from the core node. Some retransmission schemes have been suggested, but uncontrolled retransmission often increases the network load, consumes more bandwidth, and consequently, increases the probability of contention. Controlled retransmission is therefore essential. This paper proposes a new controlled retransmission scheme for loss recovery, where the available bandwidth of wavelength channels and the burst lifetime are referred to as network conditions to determine whether to transmit a dropped burst. A retrial queue-based analysis model is also constructed to validate the proposed retransmission scheme. The simulation and analysis results show that the controlled retransmission scheme is more efficient than the previously suggested schemes regarding byte loss probability, successful retransmission rate, and network throughput.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6B
• /
• pp.538-547
• /
• 2004

Optical Burst Switched (OBS) networks usually employ one-way reservation by sending a burst control packet (BCP) with a specific offset time, before transmitting each data burst frame (BDF). Therefore, The quality of service may be degraded because contentions may lead to loss of BDFs. Especially, this phenomenon becomes more serious when burst size is longer. This necessitates an effective method of prevention to avoid burst collision in nodes. OBS networks can employ several methods to avoid such burst losses. One is that burst size is cut short to reduce burst loss probability during scheduling time. In this paper, we evaluate the burst generation and transmission using Sub-Carrier Multiplexting (SCM) in OBS networks. We propose an appropriate burst assembly architecture and transmission scheme based on SCM in OBS networks. The performance of SCM in OBS networks is examined in terms of number of Sub-Carriers per wavelength, burst loss probability, throughput, and total bandwidth of an optical fiber.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.4
• /
• pp.275-279
• /
• 2004

A new burst mode clock and data recovery circuit is realized that improves the previousldy-known gated-oscilletor technique with half rate clock recovery, The circuit was fabricated with 0.25um CMOS technology, and its functions were confirmed up to 1 Gbps.

• Journal of Convergence for Information Technology
• /
• v.7 no.6
• /
• pp.167-172
• /
• 2017

In this paper, we propose a variable RGB interleaving technique for efficient data transmission in LED based visible light communication system. Visible light communication systems that utilize light as a resource for data transmission are affected by the nature of light and the three primary colors of light. However, the nature of light, such as light reflection, diffraction, and superposition, causes interference of the data to be transmitted, causing burst errors in the data. Such a problem causes the BER performance of the visible light communication system to degrade. To solve these problems, this paper attempts to utilize the variable RGB interleaving technique. Through variable RGB interleaving, data burst errors can be reduced and inter channel interference in a visible light communication system can be reduced. In addition, if the proposed system is applied to meet the QoS that depends on the importance of data or the requirements of the user, it can provide QoS requested by the user and enable efficient data transmission.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.7 no.3
• /
• pp.185-191
• /
• 2005

An accurate prediction of dormancy release and bud burst in temperate zone fruit trees is indispensable for farmers to plan heating time under partially controlled environments as well as to reduce the risk of frost damage in open fields. A thermal time-based two-step phenological model that originated in Italy was applied to two important grapevine cultivars in Korea for predicting bud-burst dates. The model consists of two sequential periods: a rest period described by chilling requirement and a forcing period described by heating requirement. It requires daily maximum and minimum temperature as an input and calculates daily chill units (chill days in negative sign) until a pre-determined chilling requirement for rest release is met. After the projected rest release date, it adds daily heat units (anti-chill days in positive sign) to the chilling requirement. The date when the sum reaches zero isregarded as the bud-burst in the model. Controlled environment experiments using field sampled twigs of 'Campbell Early' and 'Kyoho' cultivars were carried out in the vineyard at the National Horticultural Research Institute (NHRI) in Suwon during 2004-2005 to derive the model parameters: threshold temperature for chilling and chilling requirement for breaking dormancy. The model adjusted with the selected parameters was applied to the 1994-2004 daily temperature data obtained from the automated weather station in the NHRI vineyard to estimate bud burst dates of two cultivars and the results were compared with the observed data. The model showed a consistently good performance in predicting the bud burst of 'Campbell Early' and 'Kyoho' cultivars with 2.6 and 2.5 days of root mean squared error, respectively.