• 제목/요약/키워드: Burst

검색결과 1,586건 처리시간 0.024초

Synchronization Design of Satellite TDMA Network

  • 고경수;오일혁;유연상;오상균;이희수
    • 한국통신학회논문지
    • /
    • 제37권7A호
    • /
    • pp.552-559
    • /
    • 2012
  • In this paper, we introduce a frame structure of the satellite TDMA network and the synchronization method thereof. The primary station transmits a special burst called reference burst which provides reference time to network. By using this reference burst all nodes achieve initial acquisition and synchronization. We consider time drift due to the node and satellite mobility, time shift due to the node position, Doppler shift due to the node mobility and frequency offsets as important factors of the frame structure. Simulation results show that the proposed frame structure and synchronization method guarantee accurate synchronization performance when the node is even in low SNR as well as 25 kHz frequency offsets.

실제크기 배관의 파열시험을 통한 가스배관의 파괴거동 평가 (The Evaluation of Remaining Strength for Corroded Pipeline by Full Scale Burst Test)

  • 김영표;백종현;김우식
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집A
    • /
    • pp.339-344
    • /
    • 2001
  • The transmission pipeline industry spends many millions of dollars annually performing inline inspections, excavating sites of possible corrosion, and repairing or replacing damaged sections of pipe. New criteria for evaluation the integrity of corroded pipe have been developed in recent years to help in controlling these costs. These new criteria vary widely in their estimates of integrity and the most appropriate criterion for a given pipeline is not always clear. This paper presents an overview, comparison and evaluation of acceptability criteria for corrosion defects in pipelines. By full scale burst tests, this paper have assessed the relative accuracy of each of theses criteria in predicting failure and remaining strength. Many of the criteria appear to be excessively conservative and indicate that defects must be repaired when none is needed, based upon burst test data.

  • PDF

Measurement of membrane fluidity of rockfish (Sebastes schlegeli) phagocytes during the respiratory burst using fluorescence polarization assay

  • Jung, Jae-Hyuck;Kwon, Se-Ryun;Lee, Eun-Hye;Kim, Sung-Mi;Kim, Ki-Hong
    • 한국어병학회지
    • /
    • 제16권2호
    • /
    • pp.131-134
    • /
    • 2003
  • The change of membrane fluidity in rockfish (Sebastes schlegeli) phagocytes during respiratory burst was investigated. Fluorescence polarization (FP) was used as a measure of membrane fluidity, and 1-(4-trimethylaminophenyl)-6-phenyl-1 .3 ,5-hexatriene (TMA.-DPH) was used us a fluorescent probe. The significantly higher FP values in phagocytes stimulated With zymosan or phurbol myristate acetate (PMA) than unstimulated control phagocytes suggests that membrane fluidity of phagocytcs is decreased during the respiratory burst. The faster decrease of FP value in PMA stimulated phagocytes than in zymosan sumulated phagocytes may be due to bypass of the receptor-mediated stages of functional modulation. which is needed in zymosan stimulated phagocytes.

수직 자기기록 채널에서 연집에러에 따른 LDPC 부호의 성능 (Burst Error Performance of LDPC codes on Perpendicular Magnetic Recording Channel)

  • 김상인;이재진
    • 한국통신학회논문지
    • /
    • 제33권11C호
    • /
    • pp.868-873
    • /
    • 2008
  • 본 논문에서는 수직 자기기록 채널에서 연집에러에 따른 LDPC(low density parity check) 부호의 성능을 분석한다. 수직 자기기록 채널에서 연집에러가 발생하면 수신부에서는 채널상태정보(channel state information)를 통하여 연집에러 부분을 알아낸 후 채널검출기의 연판정(Log Likelihood Ratio) 값을 0으로 초기화하는 방법을 사용한다. 패리티 검사 행렬은 부호율이 0.94인 (4336,4096)와 (8672,8192)를 사용한다. 그리고 채널 검출기는 연산량이 적은 SOVA(soft output Viterbi algorithm)를 사용한다.

Kinetics of Athermal Martensitic Transformation in Yttria Doped Zirconia

  • Pee, Jae-Hwan;Choi, Eui-Seok;Hayakawa, Motozo
    • 한국세라믹학회지
    • /
    • 제42권11호
    • /
    • pp.718-721
    • /
    • 2005
  • The high temperature tetragonal phase of zirconia containing $1.40{\~}1.60\;mol\%$ of yttria can be fully retained at room temperature by rapid cooling. The metastable tetragonal phase transforms into the monoclinic phase athermally upon subzero cooling. The transformation exhibited an athermal burst transformation. The effects of yttria content and grain size on the athermal martensitic transformation were studied in detail. The burst temperature linearly decreased with increasing yttria content or decreasing grain size. To consider the distribution of martensite nuclei, the Weibull modulus of the athermal martensitic transformation was evaluated from the distribution of the burst transformation temperature. From the Weibull analysis, the distribution of embryos appears to be more homogeneous than that of the defects responsible for the fracture of similar material.

인발공정의 내부결함 방지에 관한 연구 (A Study on Prevention of Central Burst Defects in Wire Drawing)

  • 고대철;김병민;강범수
    • 대한기계학회논문집
    • /
    • 제18권11호
    • /
    • pp.3098-3107
    • /
    • 1994
  • The central burst defects, so-called chevroning, in wire drawing are analyzed by the rigid-plastic finite element method. The occurrence of central burst defects in wire drawing is estimated by the distribution of the hydrostatic pressure around the central part of the workpiece. It has been possible to obtain numerical boundaries which, in reduction in area vs. semicone angle plane, divide the safe and the danger zones, depending on friction factors and material properties. Based on the results of the analysis, it is suggested that the previous criterion derived from the upper bound analysis should be modified for better prediction of the defects. The back tension and the billet with a spherical hole on the central axis are also included in the analysis of the defects.

가스발생기용 노즐마개 파열압력 저감화에 따른 점화특성 (Decrease of Burst Pressure used a Nozzle Closure and Ignition Characteristics for a Gas Generator)

  • 차홍석;오석진;박재범;이응조
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제35회 추계학술대회논문집
    • /
    • pp.217-220
    • /
    • 2010
  • 본 논문에는 가스발생기를 사용한 사출시스템의 성능향상 즉 최대가속도를 줄일 수 있는 방법 중 하나인 노즐마개의 파열압 저감에 대한 내용이 기술되어있다. 여러가지의 노즐마개를 제작하여 공압시험으로 파열압을 측정하여 노치의 형상과 파열압과의 관계를 조사하였다. 파열압을 저감시킨 노즐마개를 적용하여 가스발생기를 제작, 시험한 결과 기준모델과 비교시 최대가속도를 저감에 효과적임을 확인하였다.

  • PDF

Analytical criteria for fuel fragmentation and burst FGR during a LOCA

  • Khvostov, G.
    • Nuclear Engineering and Technology
    • /
    • 제52권10호
    • /
    • pp.2402-2409
    • /
    • 2020
  • Analytical criteria for the onset of fuel fragmentation and Burst Fission Gas Release in fuel rods with ballooned claddings are formulated. On that basis, the GRSW-A model integrated with a fuel behaviour code is updated. After modification, the updated code is successfully applied to simulation of the Halden LOCA test IFA-650.12. Specifically, the calculation with Burst Fission Gas Release during the test resulted in prediction of cladding failure, whereas it could not be predicted at the test planning, before new models were implemented. A good agreement of the current model with experimental data for transient Fission Gas Release in the tests IFA-650.12 and IFA-650.14 is shown, as well.

HBC 722, A New FU Orionis-like Burst

  • 성현일;이정은;이상각;강원석;이병철;성환경;양윤아;박근홍;전영범;이혜란
    • 천문학회보
    • /
    • 제36권1호
    • /
    • pp.81.2-81.2
    • /
    • 2011
  • 별 생성 과정은 코어라 불리는 고밀도의 분자운이 중력붕괴를 일으켜, 코어의 물질이 원반을 거쳐 원시성으로 유입되는 과정이다. 최근 들어, 원시성으로의 물질 유입량이 시간에 따라 일정하지 않으리라는 것이 일반적으로 받아들여지고 있으며, FU orionis에서 일어났던 accretion burst가 그 하나의 증거로 제시되고 있다. 지난 9월, 또 하나의 FU orionis-type burst가 HBC 722라 불리는 한 young stellar object에서 일어났다. 이 accretion burst로 인해 HBC 722는 V등급에서 4등급 밝아졌으며, 현재 서서히 어두워져 가고 있다. 우리는 지난 11월 말부터 4차례의 BOES 관측을 이 천체에 대해 수행하였고, 그 결과를 발표하고자 한다.

  • PDF

액체로켓 터보펌프 벌류트 케이싱의 파열시험 (Burst Test of Volute Casings for Liquid Rocket Turbopump)

  • 윤석환;전성민;김진한
    • 한국유체기계학회 논문집
    • /
    • 제14권4호
    • /
    • pp.12-18
    • /
    • 2011
  • Volute casings for liquid rocket turbopump are designed and evaluated in a structural point of view. At the design step 3D modeling and finite element analyses are conducted iteratively. During the step various loads such as internal pressure, casing stiffness and mounting forces are considered in the analyses, along with the weight minimization effort. After the design step volute casings are manufactured by metal casting process, and then they are subjected to burst test for structural verification. In the burst test strains at several points are measured and compared with predicted values.