• 설비공학논문집
• /
• 제17권10호
• /
• pp.914-921
• /
• 2005

In this study, the 1/20 reduced-scale experiment using Froude scaling were conducted to investigate the effect of longitudinal ventilation velocity on the burning rate in tunnel fires. The methanol pool fires with heat release rate ranging from 2.02 kW to 6.15 kW and the n-heptane pool fires with heat release rate ranging from 2.23 kW to 15.6 kW were used. The burning rate of fuel was obtained by measuring the fuel mass at the load cell. The temperature distributions were observed by K-type thermocouples in order to investigate smoke movement. The ventilation velocity in the tested tunnel was controlled by inverter of the wind tunnel. In methanol pool fire, the increase in ventilation velocity reduces the burning rate. On the contrary in n-heptane pool fire, the increase in ventilation velocity induces large burning rate. The reason for above conflicting phenomena lies on the difference of burning rate. In methanol pool fire, the cooling effect outweighs the supply effect of oxygen to fire plume, and in n-heptane pool vice versa.

• 대한한방내과학회지
• /
• 제32권4호
• /
• pp.473-486
• /
• 2011

Objectives : This study was designed to investigate the clinical characteristics and usefulness of comprehensive diagnosis of Yin-deficiency and heart rate variability in patients with burning mouth syndrome (BMS). Methods : We surveyed 30 burning mouth syndrome patients visiting the Oral Diseases Clinic of Kyung Hee University Oriental Medicine Hospital from April to September of 2011. The subjects were evaluated on self-assessed severity of burning mouth syndrome and xerostomia using visual analogue scale (VAS) score and Yin-deficiency condition (based on the 10-item Yin-deficiency questionnaire). Salivary function was measured by the unstimulated salivary flow rate (USFR), and heart rate variability (HRV) parameters were recorded by SA-2000E (Medicore Co., Ltd., Korea). Results : There were substantial significant positive correlations between burning sensation VAS scores in mouth and Yin-deficiency scores. There was significant negative correlation between xerostomia VAS score and USFR. Compared to the normal range of total power (TP) in HRV parameters, the burning mouth syndrome patients showed significant lower values of TP. Conclusions : The results of this study suggest that comprehensive diagnosis of Yin-deficiecny and HRV parameters are useful in diagnosing of burning mouth syndrome patients. Therefore, we assume that improvement of Yin-deficiency condition can be a potentially effective way to treat burning mouth syndrome.

• 한국추진공학회지
• /
• 제9권2호
• /
• pp.1-8
• /
• 2005

가스발생기용 저 연소속도 HTPB/AP계 고체추진제의 조성에서 냉각제인 Oxamide와 Melamine이 추진제의 연소특성에 미치는 효과를 고찰하였다. 냉각제의 함량을 증가시키면 연소속도와 화염온도가 낮아지고, 두 냉각제의 화염온도에 미치는 영향은 유사하였다. 그러나 냉각제의 열분해 특성 차이로 인하여 Melamine 추진제에서는 비정상적으로 $200{\mu}m$ AP의 일부를 $6{\mu}m$ AP로 대체하면 연소속도가 오히려 감소하는 현상을 나타내었다.

• 화약ㆍ발파
• /
• 제18권1호
• /
• pp.53-58
• /
• 2000

Thermal analysis, analysis of combustion residue and combustion characteristics measure ment such as burning rate or temperature were carried out to clarify the combustion mechanism of a tungsten- potassium perchlorate-barium chromate chromate delay powder. The results obtained are as follows. The main reaction of the delay powder of tungsten-potassium perchlorate-barium chromate is the oxidation of tungsten by potassium perchlorate. Barium chromate acts as a burning rate modifier, and the smaller the larger is the burning rate. Three types of delay composition used in this study show characteristic burning behavior. A stoichiomertric or a oxidizer-rich composition has a small linear burning rate. although it is has a large heat of combustion. On the other hand, a tungsten-excess or a fuel-rich composition with a small heat of combustion has a larger linear burning rate than the former, showing a small fractional oxidation of tungeten (below 10%) contained in the delay powder. From these results, a surface combustion mechanism is proposed for the combustion mechanism of this delay powder.

• 연구논문집
• /
• 통권24호
• /
• pp.41-48
• /
• 1994

This experimental study deals with the extinguishiment characteristics of an oil pool flame using the water spray. The water through the six different atomizers is ejected over the freely burning pool flame in the quiescent surrounding air. Injection direction is vertical to the surface of oil in a small tank with a diameter of 100mm and a height of 10mm. In order to estimate quantitatively the extinction, the burning rate as well as the effective water flux are measured. The effective water flux is the amount of the water which reach the pool from the nozzle. The burning rate with the water spray increases until the injection pressure increases to reach some value, which gives the maximum burning rate, while the effective water flux without the flame decreases or does not change according to increasing of the injection pressure. This maximum burning rate is greater than 2.5 times of burning rate of the fire without the water spray. As a matter of the extinguishiment, it is found that the water drops of which size is too small can not extinguish the fire because too small drops does not reach the fuel surface.

• Journal of the Korean Wood Science and Technology
• /
• 제32권1호
• /
• pp.73-79
• /
• 2004

간벌재로 제조된 톱밥보드를 페놀수지에 함침율 40-80%로 함침시킨 후 소성온도 600-1500℃에서 소성하여 우드세라믹을 제조한 다음 수지함침율과 소성온도에 따른 우드세라믹의 밀도변화, 중량 및 치수감소율과 열전도성을 조사하였다.수지 함침율과 소성온도가 증가함에 따라 밀도는 커졌으나 소성온도 1200℃ 이후에는 밀도가 낮아졌다. 소성 후 치수 및 중량감소율은 수지함침율이 증가할수록 낮아졌으나 소성온도가 높을수록 커졌다. 열전도성은 수지함침율이 높을수록 우수하였으며, 소성온도와는 뚜렷한 경향을 발견할 수 없었다.

• 한국연소학회지
• /
• 제6권2호
• /
• pp.1-7
• /
• 2001

In order to elucidate the turbulent burning velocity of the two-component fuel mixtures, the lean and rich two-component fuel mixtures, where methane, propane and hydrogen were used as fuels, were prepared keeping the laminar burning velocity nearly the same value. Clear difference in the measured turbulent burning velocity at the same turbulence intensity can be seen among the two-component fuel mixtures with different addition rate of fuel, even under nearly the same laminar burning velocity. The burning velocities of lean mixtures change almost monotonously as changing addition rate, those of rich mixtures, however, do not show such a monotony. These phenomena can be explained qualitatively from the local burning velocities, estimated by considering the preferential diffusion effect for each fuel component. In addition, a prediction expression of turbulent burning velocity proposed for the one-component fuel mixtures can be applied to the two-component fuel mixtures by using the estimated local burning velocity of each fuel mixture.

• 한국추진공학회지
• /
• 제6권3호
• /
• pp.53-60
• /
• 2002

본 연구에서는 대기압하에서 외부교란이 고정 연료액적(jet A-1)의 증발/연소에 미치는 영향에 대한 실험연구 결과이다. 연구결과, 탄화수소계 연료인 제트유(jet A-1)액적은 크기에 상관없이 일정한 증발률 상수 $k_{e'}$ 연소율 상수 $k_c$를 유지하였다 또한, 액적의 증발률 및 연소율 상수 $k_{e'}k_c$를 증가시키기 위해서는 적절한 음파의 주파수 및 진폭영역이 존재하였으며, $80Hz\leqf\leq100Hz, 80\leqSPL\leq110$에서 각각 외부교란이 없을 때보다 1.2~1.51배, 1.04~l.42배 만큼 증가하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.323-326
• /
• 2005

본 연구에서는 연료 따른 End-Burning 하이브리드 추진 시스템의 연소 특성을 파악하기 위한 실험적 연구를 수행하였다. 연료로는 PMMA, PE를 사용하였으며 산화제는 기체 산소를 사용하였다. 연료의 후퇴율은 산화제 유량뿐만 아니라 연료의 열역학적 성질의 함수이다. 본 실험을 통하여 연료의 후퇴율이 산화제 유량과 물질전달계수인 B number로 표현된 경험식을 얻었다.

• 한국안전학회지
• /
• 제22권6호
• /
• pp.46-54
• /
• 2007

The purpose of this study was to examines the burning rate of fire retardant treated wood in the cone heater with a one-dimensional integral model. The wood samples used in this study were four species. The species of woods are Redwood, White oak, Douglas fir and Maple. Each sample was nominally 50mm thick and 100mm square. Samples were exposed to a range of incident heat fluxes 10 to $35kW/m^2$ using the cone heater. A one-dimension integral model has been used to predict burning rate, heat of gasification, flame heat fluxes, charring rate and char depth of samples. As a result measurement of mass loss rate, softwoods(Redwood and Douglas fir) has relatively low value than those for hardwoods(White oak and Maple). Average charring rate of woods in case of fire retardant treatment showed reduction effect of 41.29%, 50.00%, 48.18% and 60.82% for Redwood, Douglas fir, White fir and Maple, respectively. Almost all the predictions from integral model showed faster charring than those measured. Average difference between predictions and experimental data was 16%, 9.5% and 11.8% for N, F1 and F2 respectively. Water-soluble fire retardant used in this study find out more effect in hardwood than softwood from the result of measurement of mass loss rate and average charring rate.