• Journal of Korean Society for Quality Management
• /
• v.28 no.4
• /
• pp.67-74
• /
• 2000

A Bayesian burn-in procedure is developed for imited failure populations in which defective items fail soon after they are put in operation and non-defective ones never fail during he technical life of the items. Sequential schemes guaranteeing pre-specified outgoing quality of a product are derived based on prior information on the quality of a product and accumulated failure information up to the decision point. A numerical example is also provided.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.295-298
• /
• 2012

Repair and strengthening is necessary to extend the service life of existing buildings. Polymer-modified cement mortar (PCM) has been extensively used as a high performance material particularly for finishing and repairing works in concrete building because of itsexcellent adhesion, waterproofing, resistance to chemical attack, and workability. As PCM contains organic polymer, it is necessary to clarify its properties at high temperature under fire, on which sufficient data are not available. This paper evaluated the burn-up characteristics of polymer-modified cement mortar with cone calorimeter test, non-combustibility test and flammability test with experimental parameters such as the types of polymer, unit-polymer content, polymer-cement ratio and thickness of the specimen.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.16 no.3
• /
• pp.38-67
• /
• 2003

The burn is acute skin injury caused by fire, hot water. steam. hot oil, sour and salty. It is occurred frequently in the daily life as well as oriental therapy like moxibustion therapy, physical therapy. Nevertheless, medical treatment of the burn is almost dependent on western cure. So we chose the oriental medicine textbooks and the oriental medicine journals that were dealing with the drugs, processing the drugs. peculiar treatment put first external cure. The results were as follows; 1. The burn is acute skin injury caused by fire, hot water, steam, hot oil, sour and salty. 2. The burn cause blisters, irritability and restlessness, nausea, dryness of mouth, constipation, in case of serious, coma, dyspnea and death. The early stage of the burn, blisters form by skin damage and they burst into skin ulceration from which pus issues, the latter term, the wound form scab and healed up. 3. In a light case, medical treatment of the burn was used external treatment by medicine for externalism use, in a serious case, it was used both as an internal remedy and medicine for outward application. Also in the early stage, it was careful of using the cold and cool medicine, as the process of healing, it was used alleviating pain, detoxicating, moistening the skin, growing muscle and skin, convergence, evacuating pus, regeneration of the tissue, strengthen the spleen and nourishing the stomach. 4. The external treatment medication is Herba Ephedrae Oil(麻油), Radix ET Rhizoma Rhei(大黃), Glauberitum(寒水石), Water(水), Pig OiI(猪油), Pig Fat(猪脂), Radix Angelicae Gigantis(當歸), Rhizoma Coptidis(黃連), Cortex Phellodindri(黃栢). The White of an Egg(鷄子淸), Raw Honey(生蜜), Honey(蜜), Wine(酒), Etc. It is mostly the cold and cool medications. 5. Soft extracted and powered dosage form in external treatment is much used. The soft extracted form(32times used) are mostly Chung Ryang paste(淸凉膏) and Fructus Papaveris paste(罌粟膏). The powered form(30times used) are mostly Bingsang Powder(氷霜散), Bosaenggugo Powder(保生救苦散), Sahwang Powder(四黃散). The others is much a various powder adding solvent. 6. If varicella stage, erosion after varicella stage, oozing stage and extreme pain stage, the powder adding solvent is much used. If little oozing stage. ulcering stage, scabing stage and a chronic stage, Soft extracted dosage form is much used. 7. The most many(26.65%) used method is that apply each medication power mixed water(水), wine(酒), honey(蜜) in a wounded part.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.466-469
• /
• 2009

The life time of AMOLED displays has been dependent on OLED materials up to this point. In particular, image sticking (burn-in) has been one of the most critical issues for AMOLEDs. This paper proposes image sticking compensation AMOLED pixel circuits to address the problem without requiring process or material improvements to the OLED itself. We verified the performance of those circuits by simulation and actual panel implementation.

• Korean Institute of Interior Design Journal
• /
• no.29
• /
• pp.281-288
• /
• 2001

It shows 21st century as a networking society that is moving up the concept of global town and being industrialized with regional and personal connections. Individual's original idea and variety of 21th century may be respected by such environmental change, and age (Literary, human axis, technology axis, nature axis, kaining farming axis are central keyword) of culture that cultural capacity of individual becomes important fetters that create added value is forecasted to become. The moaning for space that is unemployment enemy by change of conceptional environment about cultural life and agreeable quality of life by development of Information-Communication technology may be required newly. As it does interaction along with development of science technique and Information-Communication technology, the future environment of various that complex! Is predicted to form network environment (existence space, cyberspace) newly. Human central interest is risen in technology balance hereupon, and these characteristic escaped in physical system that do with functional special quality and require human central and sensitive interaction. First, if examine about phenomenon by Digitize and chance aspect that is risen in 21th century, Digitize is time that action occurs fusion Tuesday that is various and Blur phenomenon of city·space, and the period to collapse the border between several individual. Second, importance more than man-centered and sensitive aspect of functional physical system is risen by digital age with development of technology medium, and as the five digital senses showed up, it suggests a sensual of the times and therefore the interest and direction get set up for the sensual sides of consumers. Third, special quality is, medium enemy by that digital space connotes meaning disk floret, variability, transparency, space red of extensity etc.. to burn and is digitalised, can be risen by symbolic, original individualities and emotional communication's the importance is required sensitivity enemy who is sympathy horn by fusion anger of individual. Technology of new media may open direction of new communication through interface that did not enjoy so far is going to supply new means that can express own to human

• Horticultural Science & Technology
• /
• v.16 no.3
• /
• pp.366-369
• /
• 1998

To lesson economical loss induced by fumigation in importing country when cut roses are exported, effects of several fumigation temperature, treatments of cut stems (dry or wet), methyl bromide (MB) concentrations, and fumigation periods on the quality of cut roses were investigated. According to results, the most important factor affecting the quality of cut rose was found to be fumigation temperature. When fumigated at $5^{\circ}C$, cut roses showed no chemical damages, e.g., tip burn or bent neck, and maintained their quality for the same duration as that of control, regardless of MB concentrations or treatments of cut stems. However, phytotoxicity by MB increased and vase life of cut rose was shortened as fumigation temperature increased. Timing of fumigation also appeared to be an important factor affecting the quality of cut roses of which phytotoxicity by MB was not observed and thier vase life was not shortened, even if MB was treated up to $40g{\cdot}m^{-3}$, when cut roses were fumigated at $5^{\circ}C$ on the day of harvesting. On the other hand, the degree of damage of cut flowers by fumigation methods or MB concentraions was not consistent with changes in fumigation temperature.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.420-425
• /
• 2010

In the process of warm forging, billet is heated up to $800^{\circ}C$ and located in the upper part of die block impression. The scattered oxidized scale may cause workers burn and shortening of die life sticking to the die block impression. The separating materials sprayed in die block cause harmful dust, harmful mist, fume, and bad odor which contaminate workshop environment. The process is classified as one of the avoided jobs and make the planned output achievement difficult. Development of an elimination device to clear out the contaminating materials in the workshop and improvement of the unsatisfactory maintenance method to fix the abrasion of die block impression which delays the dead line, cost increases needs to be developed. In this research, I tried to solve the problems caused in warm forging of bronze pipe joint such as the billet heating process, die maintenance, and manufacturing cost through improvement of warming forging manufacturing method and die maintenance method and eliminating harmful gas which will make the workshop more environment friendly.

• Nuclear Engineering and Technology
• /
• v.51 no.8
• /
• pp.1964-1969
• /
• 2019

The safety and efficiency of nuclear reactors largely depend on the monitoring and control of nuclear radiation. Due to the unique nuclear-physical characteristics, Hf is one of the most promising materials for the manufacturing of the control rods and the emitters of neutron detectors. It is proposed to use the Compton neutron detector with the emitter made of Hf in the In-core Instrumentation System (ICIS) for monitoring the neutron field. The main advantages of such a detector in comparison the conventional β-emission sensors are the possibility of reaching of a higher cumulative radiation dose and the absence of signal delays. The response time of the detection is extremely important when a nuclear reactor is operating near its critical operational parameters. Taking Hf as an example, the general principles for calculating the chains of materials transformation under neutron irradiation are reported. The influence of ^179m1Hf on the Hf composition changing dynamics and the process of transmutants' (Ta, W) generation were determined. The effect of these processes on the absorbing properties of Hf, which inevitably predetermine the lifetime of the detector and its ability to generate a signal, is estimated.

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.177-183
• /
• 2010

Bum-type $CO_2$ generators are widely used in greenhouses for the purpose of $CO_2$ supply for photosynthesis and greenhouse heating. However harmful gases included in the air might give severe effects on the plant growth. For investigating the possible emission of harmful gases from commercial bum-type $CO_2$ generators, we carried out the analysis of the harmful by-products (NO, NOx, $NO_2$, CO, and VOCs) and $CO_2$ caused by using a bum-type $CO_2$ generator in greenhouses. And the harmful by-products from different type of fuels such as kerosene, LPG, and LNG were quantified. In order to minimize the uncertainties from a $CO_2$ generator, 4 different $CO_2$ generators were utilized in four plastic greenhouses and a glasshouse located at different places during the experimental works. The results showed that the concentration of NOx is proportional to $CO_2$ concentration. Levels of harmful gases in the most of greenhouses, where the new bum-type $CO_2$ generators were installed, were lower than 1.0 ppm when $CO_2$ concentration was set at 1,000 ppm. In case of LNG combustion, the concentration of CO reached out up to 300 ppm and pre-treatment for CO reduction, such as the adsorption process, would be inevitable to abate the adverse effects on plant growth.

• Journal of the Daesoon Academy of Sciences
• /
• v.35
• /
• pp.331-358
• /
• 2020

This paper is a study of Kim Si-seup's maniacal tendency. The properties of mania can be divided into two categories. One is mental mania wherein the mind has fallen into madness, and the other is morphological mania wherein madness is revealed in real world actions. This thesis analyzes two aspects of the madness of Kim Si-seup, who showed madness in the morphological dimension as well as madness of the mind in the Joseon Dynasty. One notion that is analyzed is 'Longing to never return', and the other is 'To live in obscurity, yet practice wonders.' Kim Si-seup was a promising talent when he was young and was a so-called "infant prodigy." However, when 'Saejo' took the throne of 'Danjong,' he left the house on the road to 'burn all the books' and became a monk as a way of disappearing from the world. Thereafter, Kim Si-seup gave up on the test to become a bureaucrat and lived in hiding while doing strange things while he falsely pretended to be "crazy." He never felt regret hearing others describe him as a strange person. He lived a life of not returning to the mundane world for a long time as he traveled through famous mountains and streams. Also, he pursued a life in 'the world outside the world' without any greed. Sometimes he expresses his own free spirit and madness through poetry with 'what he talks about' and 'wonderful words.' This life was far from a form of neutralization aesthetics achieved by pursuing a 'gentle and magnanimous' life as claimed by Confucian scholars. Kim Si-seup, sometimes referred to as 'a maniac with mental clarity,' directed his efforts at 'false maniacal behavior,' 'weird behavior,' 'life pursuing the world outside the world,' and 'life of breaking off one's relationship with the world.' This maniac-like life of Kim Si-seup was not crazy but conveyed a deep desire to criticize the absurd reality of Joseon society at the time. Regarding Kim Si-seup, Li Hwang criticizes him for wishing 'to live in obscurity yet practice wonders.' Unlike Li Hwang, Yi Yi, who wrote The Records of Kim Si-seup when commissioned to do so by Sun Jo, positively evaluated Kim Si-seup as "a Confucian who followed Buddhism." Although the contents of these evaluations of Kim Si-seup were different, both agreed that Kim Si-seup was a maniacally-oriented individual. Kim Si-seup, who was mentally maniacal and morphological maniacal, represents a unique case in the study history of the Joseon Dynasty, wherein the 'the doctrines of Zhu Zi' exerted great influence.