• 대한화상학회지
• /
• 제23권1호
• /
• pp.1-6
• /
• 2020

Purpose: PL, creatinine and urine output are biomarkers of the suitability and prognosis of fluid therapy in severe burn patients. The purpose of this study is to evaluate the usefulness of predicting mortality by biomarkers and its change during initial fluid therapy for severe burn patients. Methods: A retrograde review was performed on 733 patients from January 2014 to December 2018 who were admitted as severe burn patients to our burn intensive care unit (BICU). Plasma lactate, serum creatinine and urine output were measured at the time of admission to the BICU and after 48 hours. ABSI score, Hangang score, APACHEII, revised Baux index and TBSA were collected after admission. Results: 733 patients were enrolled. PL was the most useful indicators for predicting mortality in burn patients at the time of admission (AUC: 0.813) and after 48 hours (AUC: 0.698). On the other hand, mortality prediction from initial fluid therapy for 48 hours showed different results. Only creatinine showed statistical differences (P<0.05) in mortality prediction. But there were no statistical differences in mortality prediction with PL and UO (P>0.05). Conclusion: In this study, PL was most useful predictor among biomarkers for predicting mortality. Improvement in creatinine levels during the first 48 hours is associated with improved mortality. Therefore, efforts are needed to improve creatinine levels.

• 한국전기전자재료학회논문지
• /
• 제18권6호
• /
• pp.506-509
• /
• 2005

This paper presents the improved burn-in method for the reliability of SRAM in Multi Chip Package (MCP). Semiconductor reliability is commonly improved by the burn-in process. Reliability Problem is very significant in the MCP which includes over two chips in a package because the failure of one SRAM chip has a large influence on the yield and quality of the other chips such as Flash Memory, DRAM, etc. Therefore the quality of SRAM must be guaranteed. To improve the qualify of SRAM, we applied the improved wafer level burn-in process using multi cell selection method in addition to the previously used methods and it is found to be effective in detecting particular failures. Finally, with the composition of some kinds of methods, we achieved the high quality of SRAM in MCP.

• 대한화상학회지
• /
• 제22권2호
• /
• pp.58-65
• /
• 2019

Wound caused by high-tension electrical burns is difficult to manage because the wound is deep and complex. The wound is progressively necrotic due to microvascular injury resulting in deep tissue exposure. So, coverage of the wound at the entry point and the exit point is cumbersome, often requiring flap coverage. We experienced a case of one patient for peroneal artery perforator free flap coverage on the palm of the right hand of the entry point of electrical burn. The left foot wound of electrical exit point was covered by full thickness skin graft. Also a small wound was on the left side of the lower back was the exit point of electrical burn. The lower back wound was healed and recurred repeatedly after burn. On postburn day 6 month, through the radiologic exam, metal shadow was identified in the left gluteus muscle forming chronic sinus. We explored the wound of sinus and a foreign body was identified in the sac as multi braid wires thin as hair. According to the patient's past history, we suspected that the back wound was caused by electrical burn injury through the wires.

• 대한원격탐사학회지
• /
• 제35권4호
• /
• pp.517-534
• /
• 2019

In abrupt fire disturbances, high quality images suitable for wildfire damage assessment can be difficult to acquire. Quantifying wildfire burn area and severity are essential measures for quick short-term disaster response and efficient long-term disaster restoration. Planetscope (PS) imagery offers 3 m spatial and daily temporal resolution, which can overcome the spatio-temporal resolution tradeoff of conventional satellites, albeit at the cost of spectral resolution. This study investigated the potential of augmenting PS imagery by integrating the spectral information from Sentinel-2 (S2) differenced Normalized Burn Ratio (dNBR) to PS differenced Normalized Difference Vegetation Index (dNDVI) using histogram matching,specifically for wildfire burn area and severity assessment of the Okgye wildfire which occurred on April 4th, 2019. Due to the difficulty in acquiring reference data, the results of the study were compared to the wildfire burn area reported by Ministry of the Interior and Safety. The burn area estimates from this study demonstrated that the histogram-matched (HM) PS dNDVI image produced more accurate burn area estimates and more descriptive burn severity intervals in contrast to conventional methods using S2. The HM PS dNDVI image returned an error of only 0.691% whereas the S2 dNDVI and dNBR images overestimated the wildfire burn area by 5.32% and 106%, respectively. These improvements using PS were largely due to the higher spatial resolution, allowing for the detection of sparsely distributed patches of land and narrow roads, which were indistinguishable using S2 dNBR. In addition, the integration of spectral information from S2 in the PS image resolved saturation effects in areas of low and high burn severity.

• 대한화상학회지
• /
• 제23권1호
• /
• pp.7-12
• /
• 2020

Purpose: Due to rapid changes in the industrial structure in last decade, the wider various types of chemical agents were introduced. Burn surgeons should be well-informed with rapid changes of chemical burns. We present the recent incidence trends of causing agents of chemical burns. Methods: From 2010 to 2019, 92 chemical burn victims were included in this study. A retrospective study was made about the type, distribution and incidence of the causing agents of chemical burns. Initial treatments of most chemical burn wounds are copious saline irrigation by tap water, except hydrofluoric acid burn cases managed by 10% calcium gluconate injection. In alkali chemical burns on extremity, if thin eschars appear in postburn 2~3 days, acute early surgical escharectomy and split thickness skin graft were done. Results: More than 9 types of major chemicals causing chemical burns were surveyed, and the most common causing agent of chemical burns was Hydrofluoric acid (23.9%) followed by Acetic acid (19.6%) and Sodium hydroxide (8.7%). Conclusion: From 2010 to 2019, changes in the causing agent of chemical burns are that the types of major causing agents of chemical burns have increased and the distribution and incidence of causing agents have changed compared to previous reports. According to this study, more than 9 types of major chemicals causing chemical burns were surveyed, and the most common causing agent of chemical burns was Hydrofluoric acid (23.9%) followed by Acetic acid, Sodium hydroxide.

• 산업공학
• /
• 제20권1호
• /
• pp.87-93
• /
• 2007

Burn-in is an engineering method for screening out products containing reliability defects which would cause early failures in field operation. Previously, various burn-in models have been proposed mainly focused on the trade-off of shop repair cost and warranty cost ignoring manufacturing yield. From the view point of a manufacturer, however, burn-in decreases warranty cost at the expense of yield reduction. In this paper, we provide a general model quantifying a trade-off between product yield and reliability, in which any defect distribution from previous yield models can be used. A profit function is expressed in burn-in environments for determining an optimal burn-in time. Finally, the method is illustrated with gate oxide failures which is an important reliability concerns for VLSI CMOS circuits.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 1999년도 추계학술대회
• /
• pp.147-155
• /
• 1999

This paper discusses an optimal burn-in procedure to minimize total costs based on the assumption that the failure rate pattern follows a bimodal mixed Weibull distribution. The procedure will consider warranty period as a factor of the total expected burn-in cost. A cost model is formulated to find the optimal burn-in time that minimizes the expected burn-in cost. Conditional reliability for warranty period will be discussed. An illustrative example is included to show how to use the cost model in practice.

• 대한의료기공학회지
• /
• 제20권1호
• /
• pp.104-117
• /
• 2020

Objective : The purpose of this study is to report that Korean Medicine treatment is effective in treating pain in burn patients. Results : We effectively reduced the pain that occurred after the end of the burn treatment through Korean Medicine such as multiple acupuncture, cupping, Sugi therapy, and external salve. VAS(Visual Analog Scale) values were reduced from 8 to 2 after about 23 days of treatment. Conclusions : This report shows that there was no special effect on dermatology treatment for pain that occurred after the end of treatment of burn patient, but it can also be excellent through Korean Medicine alone. It's only one case, so it cannot be determined that Korean Medicine for a burn is excellent. but if more excellent burn treatment of Korean Medicine is reported continuously, it will prove its validity. Therefore, it is hoped that more case reports and studies on burn treatments will be done in the future.

• 한국추진공학회지
• /
• 제18권3호
• /
• pp.40-47
• /
• 2014

우주발사체 최적 설계에 사용될 내탄도 해석 코드를 위한 그레인 Burn-back 연구를 수행하였다. 그레인 Burn-back은 내탄도 해석에 필수적인 그레인의 연소면적의 계산에 사용된다. 최적 설계에 사용될 내탄도 해석 코드는 설계 변수의 변경 및 반복계산을 통해 요구 성능을 만족할 때 까지 반복 계산을 수행한다. 따라서 내탄도 해석에 적용될 Burn-back 해석기법은 설계 변수의 변경이 용이하며 계산시간이 짧아야 한다. 이에 본 연구에서는 Analytical Method를 이용하여 Burn-back 해석코드를 개발하였으며, 그레인 형상에 대해 기하학적 변수를 선정 및 형상 변화에 대해 정리하였다. 개발된 코드는 Numerical Method로부터 산출된 값과 비교하여 검증을 수행하였다.

• 한국추진공학회지
• /
• 제23권4호
• /
• pp.81-91
• /
• 2019

고체 로켓 모터 성능을 계산하기 위해 Face offsetting method를 사용하여 3차원 그레인 burn-back 해석을 수행하였다. 그레인 연소 형상 해석은 표면의 이동을 계산하는 이동 경계면 문제이다. 기존 연구에서는 다양한 이동 경계면 해석 기법이 그레인 burn-back 해석에 적용되었으나 결과가 불완전했다. 이에 본 연구에선 face offsetting method를 사용한 그레인 burn-back 해석 모듈을 개발하였다. Face offsetting method는 기존 해석 기법의 장점을 조합하여 강건하고 정밀한 이동 경계면 해석을 수행한다. 해석 결과, face offsetting method가 그레인 burn-back 해석에 유용함을 검증하였다.