• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.6 no.1
• /
• pp.81-89
• /
• 2008

Purpose: This study aims to examine effect of microcurrent electrostimulation on burn healing by electric intensity and of which the electric intensity on the acute burn being cured with microcurrent electrostimulation therapy. Methods: 28 Sprague Dawley Rats is classified into a control group of 8 rats, an experimental group I of 10 rats and an experimental group II of 10 rats. The control group is not cured, the experimental group I is exposed to 10 Hz, and $100{\mu}A$ with microcurrent electrostimulation, and the experimental group II is exposed to 10 Hz, $300{\mu}A$ for 15 minutes a day. The next day, 2th, 4th, and 6th day after rats is burned. Result: There are not significant differences of length change of the burn cure between the control group, the experimental group I, and the experimental group II by a period. However, systematically hair follicle cell on the 2th day and epidermal cell on the 6th day turn up in the experimental group I, and the experimental group II. Inquiry: Nancy(1994) did not obtain the desired result when the skin of a pig is exposed to 0.1 Hz, and $100{\mu}A$ for wound healing. In the result of the study, when burn length is measured on the 2th, 4th, and 6th to see the length change of acute burn, there is not significant differences among 3 groups. Conclusion: Statistically, there is not significant differences of the length change between 3 groups. However, systematically the burn is cured faster in the experimental group I, and the experimental group II than in the contrast group.

• The Journal of Korean Society for School & Community Health Education
• /
• v.13 no.1
• /
• pp.1-12
• /
• 2012

Backgrounds: Burn of children and adolescents is an accident due to careless protector in many case. All the pediatric burns are preventable. We investigated the characteristics of pediatric burns. Such data can propose proper health educational program designs to suit the community. Purpose: This study aims to analyse the characteristics of pediatric burn patients and to discusses a possible prevention program for this population. Methods: The subjects were 77 patients reviewed burn injury in pediatric under 15 years old. Data were burn center of the B General Hospital from January 1 to December 31 2009 and a retrospective epidemiological study was collecting medical records. Results: seventy-seven children and adolescents with burn were admission treated for Burns and they were 54.5% boys and 45.5% girls. An incidence of age group with pediatric burn was less than one year of age(46.8%), 2-3 year(27.3%), 4~7year(10.4%), over 8 years old(15.6). Length of stay hospitalization was 1~2 week(32.9%) highest percentage and second-degree deep burns were 41.6% the highest percentage. Divided by the age of about 3, length of stay, ICU status, time of injury onset, cause, indication, place of accident, treatment, degree, region of burns had a statistically significant difference. Conclusion: Less than one year of age was the highest percentage. Divided by the age of about 3, Characteristics and factors affecting the range of burn were significant. Education and guide are necessary to reduce incidence of pediatric burns.

• Journal of Korean Academy of Nursing
• /
• v.17 no.3
• /
• pp.227-240
• /
• 1987

Infection has assumed increased importance as a cause of death among thermally injured individuals. Decreased treatment effectiveness and an increase in mortality are the hallmarks of nosocomial infection. Infection control is a monumental task that must be achieved to reduce mortalities. This was a retrospective study to survey the epidemiological features of nosocomial infections in a burn unit and to identify the possibilities for infection control. During the past 6 year 2 month period from July, 1981 to August, 1987, 306 burn patients were treated in the burn unit of university hospital. Among of these, 290 cases were the subjects of this study. The data were collected from the patients' records after discharge. All data collected were analyzed using percent, x$^2$-test, t-test with SPSS program. The results of this study are summariged as follows: 1) Infection rate was 40%. According to site, there were 67 cases of wound infection, 60 cases of post-operative skin graft infection, 20 cases of septicemia and 20 cases of donor site infection. As far as the burn size was concerned, the infection rate for patients whose burn size ranged 61 to 70%, was shown to be 100%, followed by the infection rate of 93.8%, for patients whose burn size ranged from 41~50%. As far as the period of time over which the infection developed, 5 to 7 days showed the highest frequency. Further infection was the main cause of deaths and complications. 2) Based upon the results obained by comparing the general characteristics, between a hospital infection-group and non-hospital infection group, there was a significant defference according to age, the time of the year when the accident happened, the place of accident or length of hospital-admission. And according to the result obtained by comparing the general characteristics of the burn, there was a significant difference according to burn size, burn depth, burn type, and burn site. And also based upon the result obtained by comparing the two groups according to method of treatment, there was a significant difference according to the use of antibiotics and to the type of wound-treatment, and for the 8 different binds of treatment related to infection, there was a significant difference for all. In conclusion, age, length of hospital-admission, burn size, burn type, burn site, burn depth, type of woundtreatment and the 8 different binds of treatment, which are related to burns, were shown to be the factors which affect the infection rate in burn patients.

• Journal of the Korean Burn Society
• /
• v.19 no.1
• /
• pp.12-15
• /
• 2016

Purpose: Firefighters are vulnerable to burn injury during firefighting. In extensive fires, conducted heat and radiant heat can cause burn injury even though firefighters are not directly exposed to fire. There has been increasing interest in the health problems of firefighters considerably since Hongje-dong fire of 2001, which claimed the lives of six fireman. However, there have been no studies done on the characteristics of firefighter burn injuries in South Korea. Therefore, we investigated the characteristics of firefighter burn injuries in a burn center. Methods: A retrospective, single-center research was performed between Jan 2006 to Dec 2015. 24 firefighters came to the burn center. The electronic medical records of patients were reviewed. Results: Flame burns (87.5%) were the major cause of burn in firefighter. All the patients suffered second-degree or third-degree burns. Mean burn size was 6.1±6.7%. 22 of 24 patients were hospitalized and 2 of 22 hospitalized patients admitted to intensive care unit. Mean length of hospitalization was 29.1±23.7 days and mean length of intensive care unit hospitalization was 6.0±1.4 days. The face was the site most commonly burned, representing 25.8% of injuries. The hand/wrist, upper extremity, and neck were the next largest groups, with 19.4, 12.9, 11.3% of the injuries, respectively. Conclusion: Firefighter burn injuries occur to predictable anatomic sites with common injury patterns. The burn size was small but, admitted patients need about 30 days of hospitalization.

• Journal of Welding and Joining
• /
• v.16 no.5
• /
• pp.134-141
• /
• 1998

In this study, a fillet size for bending fatigue strength of one side fillet welded T-joint, used in box type girder and other welding structure, was investigated by bending fatigue test with or without edge preparation and burn through, with variation of joint shape. As a result, the following conclusions were obtained. (1) In one side fillet welded T-joint, the larger the leg length, the greater the bending fatigue strength. The increase in bending fatigue strength. (2) One side filet welded T-joint with edge preparation showed higher bending fatigue strength than that with twofold-large leg length and without edge preparation. (3) In one side fillet welded T-joint without edge preparation, both manual welding and automatic welding were carried out with same condition. In this case, automatic welding shoed deeper penetration and more increased horizontal leg length than manual welding, so that automatic welding offers grater bending fatigue strength. (4) For one side fillet welded T-joint without edge preparation, the ratio(h/t) of the leg length (h) and the main plate thickness (t) in which toe crack can occur was 1.2 over. (5) In one side fillet welded T-joint with edge preparation, the burn through led to reduced bending fatigue strength. However, this bending fatigue strength was higher than that of one side fillet welded T-joint without edge preparation and with a larger leg length.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.3
• /
• pp.201-209
• /
• 2015

Currently, 23 nuclear power plants are in operation at Kori, Uljin, Younggwang and Wolsong site and a reference deep geological disposal system has been developed for the spent fuels generated by them. The reference spent fuel for this disposal system has 4.5wt% of initial enrichment, 55 GWd/MtU of burn-up, and 40 years of cooling time. In this paper, to improve disposal efficiency and economic feasibility, the characteristics of spent fuels from nuclear power plants, such as type and burn-up, were reviewed. A disposal canister concept for shorter length and relatively lower burn-up spent fuels than the reference spent fuels was developed. Based on this canister concept, thermal analyses were carried out and a deep geological disposal concept was proposed. Measures of disposal efficiency such as unit disposal area and disposal density were compared between this disposal system and the reference disposal system. Also, economic feasibility, such as the volume reduction of copper, cast iron, and bentonite, was analyzed and the results of these analyses showed that the disposal system proposed in this paper has an efficiency of at least 20%. These results could be used for establishing spent fuel management policy and designing practical disposal systems for spent fuels.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.6
• /
• pp.932-937
• /
• 2012

In the presented study, SM45C carbon steel parts were joined by friction welding. The welding process was carried out under optimized conditions using statistical approach. The study of SM45C is conducted with various combinations of process parameters. Parameter optimization, microstructure and mechanical property correlation are the major contribution of the study. The welded joints were produced by varying spindle revolution speed, friction pressure, upset pressure and burn-off length. Tension tests were applied to welded parts to obtain the strength of the joints. Fracturs properties were additionally obtained experimentally under fluctuated tensile loads. Microstructures using microphotographs were examined in the weld interface and weld region and heat affected zone and base metal and flash zone of welded parts. Finally, Hardness variations in welding zone and base metal were also obtained. Through these tests, the optimum conditions of parameters for ${\phi}20$ SM45C in friction welding were obtained when the friction spindle revolution was 1,950 rpm, the friction pressures was 30 MPs, upset pressures was 50 MPs.

• Archives of Reconstructive Microsurgery
• /
• v.7 no.1
• /
• pp.68-72
• /
• 1998

With the advent of microvascular free-tissue transfer, this single stage resurfacing method for large scar and soft tissue defects around the wrist in the patients of electrical burn has distinctive advantage over the conventional multistage pedicle-flap transfer. Between 1992 and 1996, we treated 9 cases of 8 patients who had large scar around the wrist due to old electrical burn with free flaps as a preparation of staged tendon graft. Mean age was 30.3 years and average scar area was $6{\times}11cm$. The length of time the injury and free flaps was 9 months on an average. Prior to the free flap, we performed the angiography to all patients in order to evaluate the circulation of the forearm and hand and to choose the recipient vessel. In all cases, proximal ulnar arteries in the forearm remained intact and all radial arteries remained intact in 8 of 9 cases on angiogram. The interosseous arteries were well visualized in all cases. We used the ulnar arteries as a recipient artery. The types of flaps used were f scapular cutaneous flaps, 2 dorsalis pedis flaps and a radial forearm flap. Flap survial was 100 percents with satisfactory functional and cosmetic results. Free flaps using ulnar artery as a recipient artery is one of the useful reconstruction methods for the resurfacing of large scar around the wrist in the patients of old electrical burn.

• Journal of Power System Engineering
• /
• v.3 no.3
• /
• pp.22-28
• /
• 1999

The injected liquid does not break-up instantly after injection for diesel engine. There is some unbroken portion, which is the liquid core(The length of liquid core is called the break-up length) in the spray. If the liquid core is longer than the depth of the bowl in the small DI diesel engine, the liquid core impinges on the surface of the piston. Once the liquid core impinges on the surface, it cannot ignite or burn rapidly and thus prolongs burning time with a degradation in thermal efficiency. The break-up length of a diesel spray in a compressure vessel was measured by an electric resistance method, A voltage was applied between the nozzle and screen, bar, needle electrode inserted at various axial and radial positions into atomizing sprays. As a result, a current flows not only in the region of liquid core but also through the droplets of the spray. It is found that the break-up length measured with screen electrode is overestimated. The break-up length of the spray is found to be proportional to the square root of the density ratio of fuel and surrounding gas. The break-up length of the spray decreases as the injection pressure and the back pressure increase.

• Journal of Bio-Environment Control
• /
• v.27 no.2
• /
• pp.111-116
• /
• 2018

This study were carried out to evaluate the efficiency of using burn-type $CO_2$ generators in greenhouse for cultivation 'Seolhyang' strawberry ($Fragaria{\times}ananassa\;Duch.$) during winter season. The concentration of $CO_2$ was 200 to $600{\mu}mol{\cdot}mol^{-1}$ in the control, and 800 to $1,100{\mu}mol{\cdot}mol^{-1}$ in using burn-type $CO_2$ generator between 6 and 11 hours. At other times, it was observed that at similar concentration in the control and using burn-type $CO_2$ generator. Measured greenhouse air temperature inside the of using burn-type $CO_2$ generator was $2{\sim}3^{\circ}C$ higher than the control at 6 ~ 10 am. There was no temperature difference between treatments after 11 o'clock. Plant height, leaf length, leaf width, root diameter, fresh weight, and dry weight were not different between treatments. The marketable yield (kg/10a) of using burn-type generator were 4,131 kg, which was 519 kg higher than the control. Therefore, the total fruit yields increased 17% compared to the control.