• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.3
• /
• pp.166-177
• /
• 2005

This study developed the jet integral model to analyze the behavior of the wastewater discharge in the near field using the fourth order Runge-Kutta method in order to numerically solve the problems of six ordinary differential equations and six unknowns. This jet integral model used the entrainment hypothesis and the manipulation of sonle shape constant. This study also conducted the hydraulic experiments fnr single horizontal buoyant Jet using LIF through the calibration procedure. The results calculated by the previous models, CORMIX 1 and VISJET, and the proposed jet integral model were compared to the hydraulic experimental results. The centerline trajectories predicted by the proposed model were in good agreements with the experimental results in the transition region whereas the trajectories calculated by the VISJET model agreed well with the measured data in the momentum and buoyancy-dominated regions. The centerline dilution calculated by the proposed model agreed generally with the measured dilution in the intial and transition regions while the centerline dilution predicted by the CORMIX 1 was in good agreements with the experimental results in the momentum and buoyancy-dominated regions.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.3
• /
• pp.140-148
• /
• 2014

A storm surge barrier is a specific type of floodgate, designed to prevent a storm surge or spring tide from flooding the protected area behind the barrier. A surge barrier is almost always part of a larger flood protection system consisting of floodwalls, dikes, and other constructions. Surge barriers allow water to pass under normal circumstances but, when a (storm) surge is expected, the barrier can be closed. Among the various means of closing, buoyant flap typed storm surge barrier which was indicated by MOSE project in Italy is chosen for Masan bay protection, and the motion of the surge barrier under the action of storm surge and wave is examined using FLOW-3D, a computational fluid dynamics software analyzing various physical flow processes. Numerical result shows that storm surge barrier is successfully operated under wave height 3 m, and tidal range 2 m.

• Food Science and Biotechnology
• /
• v.17 no.5
• /
• pp.925-930
• /
• 2008

Norovirus has become the most common cause of human gastroenteritis in developed countries. Detection procedures of foodborne viruses from foods require several steps. The concentration step using polyethylene glycol (PEG) is time-consuming and the detection efficiency of reverse transcription-polymerase chain reaction (RT-PCR) is affected by inhibitors from food components. In this study, a rapid detection method based on buoyant density centrifugation was developed to replace the time-consuming chloroform-polyethylene glycol-Tris Tween method. Feline calicivirus that belongs to the family Caliciviridae was used as a surrogate model for norovirus. After artificial inoculation of feline calcivirus (FCV) to oyster and lettuce, 830 ${\mu}L$ of homogenized sample suspension was layered on the top of 670 ${\mu}L$ 20% percoll and centrifuged. Then RNA extraction step was proceeded with the supernatant. By varying several physical conditions, the detection limits were lowered to $2.4{\times}10^2$ PFU per 1 g in oyster and $2.4{\times}10^0$ PFU per 1 g in lettuce. The protocol obtained in this study could be used to develop new detection method for norovirus in foods.

• Fire Science and Engineering
• /
• v.10 no.4
• /
• pp.19-27
• /
• 1996

The objective of this research is to study on the upper layer temperature, interface height and flow regime in case of several furniture fires such as trashcan, chair, carpet, sofa, mattress and wardrobe as a fire starter in a residential room by performing the experimental studies. The upper layer temperature and the Interface height were relatively well agreed with the experimental results when the flow coefficient at the opening was 0.65-0.8 for the rectangular trashcan, 0.65-0.9 for the circular trashcan and chair, and 0.7-0.9 for the carpet, sofa, mattress and wardrobe. The interface heights for the seven furniture fires were around 1[m] maintaining steady state. However, at the time of the maximum temperature, the interface height was lowered to 0.25[m]-0.75[m] from the floor. The flow regime at the opening was filling and buoyant for the distributed fire, and for the concentrated fire it was filling and then quickly changed to flow, and the flow period was long. The descending speed of the interface height was proportioned to the inflammability of the furniture and the contact surface area with air. The time required to come down around 1[m] was within 1-3 minutes.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.10
• /
• pp.1532-1539
• /
• 2017

The floating photovoltaic system is a new concept in the renewable energy technology. That is similar to land based photovoltaic technology except floating system. So the system needs buoyant objects, mooring, ect, besides modules and supports, and that is able to withstand in water level changes and wind strength. Therefore the floating photovoltaic system is much different from land photovoltaic system. K-water (Korea Water Resources Corporation) has been operating two floating photovoltaic system that's capacity is 100 kW and 500 kW respectively since in summer 2011 for commercial generation, and have construction project for 2,000 kW in Boryeong multipurpose Dam and other areas. Furthermore K-water was developing a tracking-type floating photovoltaic system at Daecheong multipurpose Dam and developed and installed an ocean floating photovoltaic demonstration plant at Sihwa Lake in October 2013 for R&D. In this paper, we introduce that structure of floating photovoltaic system include buoyant structure, mooring system and auxiliary device. Especially the rope which is in part of mooring should be always maintain tension under any water level. Also we explain about structure design concept to wind load in an every loading condition and a kind of structure materials and PV structure types used in water environment. Especially ocean floating PV system is affected by tidal current and typhoon. So there are considering the elements in design. Finally we compare with floating and land photovoltaic on power amount. As a result of that we verified the floating photovoltaic system is more about 6.6~14.2 % efficiency than a general land photovoltaic system.

• Journal of Korean Society on Water Environment
• /
• v.24 no.3
• /
• pp.365-377
• /
• 2008

Large artificial dam reservoirs and associated downstream ecosystems are under increased pressure from long-term negative impacts of turbid flood runoff. Despite various emerging issues of reservoir turbidity flow, turbidity modeling studies have been rare due to lack of experimental data that can support scientific interpretation. Modeling suspended sediment (SS) dynamics, and therefore turbidity ($C_T$), requires provision of constitutive relationships ($SS-C_T$) and accounting for deposition of different SS size fractions/types distribution in order to display this complicated dynamic behavior. This study explored the performance of a coupled two-dimensional (2D) hydrodynamic and particle dynamics model that simulates the fate and transport of a turbid density flow in a negatively buoyant density flow regime. Multiple groups of suspended sediment (SS), classified by the particle size and their site-specific $SS-C_T$ relationships, were used for the conversion between field measurements ($C_T$) and model state variables (SS). The 2D model showed, in overall, good performance in reproducing the reservoir thermal structure, flood propagation dynamics and the magnitude and distribution of turbidity in the stratified reservoir. Some significant errors were noticed in the transitional zone due to the inherent lateral averaging assumption of the 2D hydrodynamic model, and in the lacustrine zone possibly due to long-term decay of particulate organic matters induced during flood runoffs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.6
• /
• pp.1385-1394
• /
• 1994

A three-dimensional numerical model of surface buoyant jets with variable density was established. The model uses fully nonlinear, time-dependent, three-dimensional, ${\sigma}$-transformed equations of motion and equation of heat transport. A semi-implicit numerical scheme in time has been adopted for computational efficiency. The model was applied for thermal jets discharging into a stagnant water and the simulated results were compared with a hydraulic experimental data set showing good agreement. Comparative studies of exchange coefficients and stability functions indicated that spatial variation of exchange coefficients should be considered and the existing stability functions should be modified to simulate surface buoyant jets accurately.

• Ecology and Resilient Infrastructure
• /
• v.3 no.4
• /
• pp.215-220
• /
• 2016

A new immobilization technique of nanoscale $TiO_2$ powder to expanded polystyrene (EPS) balls with temperature-controlled melting method was developed, and the photocatalytic activity of $TiO_2$ powder-embedded EPS balls were evaluated using methylene blue (MB) solution under ultraviolet irradiation (${\lambda}=254nm$). Based on the scanning electron microscope (SEM) images and associated energy-dispersive X-ray spectroscopy (EDX) analysis, the components of the intact EPS balls were mainly carbon and oxygen, whereas those of $TiO_2$-immobilized EPS balls were carbon, oxygen, and titanium, indicating that relatively homogenous patches of $TiO_2$ and glycerin film were coated on the surface of EPS balls. Based on the comparison of degradation efficiencies of MB between intact and $TiO_2$-immobilized EPS balls under UVC illumination, the degradation efficiencies of MB can be significantly improved using $TiO_2$-immobilized EPS balls, and surface reactions in heterogeneous photocatalysis were more dominant than photo-induced radical reactions in aqueous solutions. Thus, $TiO_2$-immobilized EPS balls were found to be an effective photocatalyst for photodegradation of organic compounds in aqueous solutions without further processes (i.e., separation, recycling, and regeneration of $TiO_2$ powder). Further study is in progress to evaluate the feasibility for usage of buoyant $TiO_2$-immobilized EPS to inhibit the excessive growth of algae in rivers and lakes.

• Korean Journal of Veterinary Research
• /
• v.32 no.1
• /
• pp.77-82
• /
• 1992

A noncytopathic bovine viral diarrhea virus(NC BVDV) strain isolated and purified from persistently infected primary bovine fetal lung(BFL) cells was studied by biophysical methods. The buoyant density of particles of the NC BVDV strain was shown to be between 1,090 and $1,114g/cm^3$ and the maximum virus infectivity occured at $1,098g/cm^3$. Immunoelectron microscopic examination by using the partially purified virus revealed regular spherical particles 30~80nm in diameter. Differences in the genomic size of cytopathic and noncytopathic BVDV from infected cells were not found. A comparison of viral proteins of a noncytopathic and cytopathic strain(NADL) by immunoprecipitation using monoclonal antibody indicated that NC BVDV, compared to cytopathic NADL, was cell associated.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.4
• /
• pp.981-989
• /
• 2015

This study aims to investigate how ovulation induction of sevenband grouper, Epinephelus septemfasciatus varies when treated with different hormonal substances such as ovaprim, pimozide, LHRHa, and HCG. As for LHRHa, we injected it in different concentrations: $50{\mu}g/kg$, $100{\mu}g/kg$, $150{\mu}g/kg$, and $200{\mu}g/kg$. All hormonal substances including LHRHa were injected into back muscles. As a result, ovulation occurred in all sample groups. The sample group injected with HCG released the largest amount of eggs, and the dimeter of eggs and oil globules were also significantly bigger than those of others. Fertilization rate, embryonic survival rate, and hatching rate were the highest in a LHRHa ($100{\mu}g/kg$) +pimozide ($1,000{\mu}g/kg$) group and buoyant rate in a LHRHa group. Ovulation rate was 100% when LHRHa was injected in different concentrations. The largest amount of eggs was released in $200{\mu}g/kg$. The diameter of eggs and oil globules were the biggest in $200{\mu}g/kg$ and the smallest in $50{\mu}g/kg$. Fertilization rate showed no significant difference through all different levels of concentration: 94.6-95.3%. Buoyant rate was the highest in $100{\mu}g/kg$ and embryonic survival rate and hatching rate in $150{\mu}g/kg$. Based on these experimental results, we concluded that LHRHa in $100{\mu}g/kg$ is the most efficient for the ovulation induction of sevenband grouper.