• International Journal of Safety
• /
• 제9권1호
• /
• pp.1-5
• /
• 2010

On-site examinations and fire simulation were carried out to speculate on causes of the fire at an indoor shooting range in Busan. An experiment on the ignitability of unburned gunpowder was also conducted. Cigarette was the most likely source of ignition for the fire, while impact of a stray bullet failed to ignite the unburned gunpowder. The explosion in the shooting area was presumed to be caused by violent combustion of the polyurethane foam and unburned gunpowder accumulated on it. Fire safety measures include prohibit of use of profile polyurethane foam, complete clean-up of unburned gunpowder, and removal of steel components from the bullet trap.

• 대한기계학회논문집A
• /
• 제36권12호
• /
• pp.1569-1575
• /
• 2012

본 논문은 AUTODYN-3D 프로그램을 이용한 방탄 헬멧의 탄도충격에 관한 연구를 하였다. 두 가지 유형의 재료가 방탄 헬멧에 사용되었다. Kevlar 및 Steel/Kevlar 혼합복합재 이다. 강구와 7.62 mm 금속피복탄이 시뮬레이션에서 사용되었다. 시뮬레이션에서 발사체의 변형된 형상과 내부에너지가 계산되었다. 결과는 Steel/Kevlar 헬멧을 관통하기 위해 요구되는 충격속도는 강구와 7.62 mm 금속피복탄에 따라 각각 655 m/s 와 845 m/s 이상이다. 결과로부터 Kevlar 와 Steel/Kevlar 헬멧 사이의 탄도 저항에 큰 차이를 볼 수 있었다. NIJ-STD-0106.01 Type II헬멧에 대한 시뮬레이션으로 충격 속도 358 m/s 의 7.62 mm 금속피복탄이 사용되었다. 시뮬레이션 결과는 Steel/Kevlar 헬멧이 충격 속도 358 m/s 의 7.62 mm 금속피복탄을 방어할 수 있는 것으로 나타났다.

• 한국군사과학기술학회지
• /
• 제14권4호
• /
• pp.630-638
• /
• 2011

A new smooth bore test barrel was developed to be used in sensitivity assessment test for explosives and fragment impact test. The bore diameter of the barrel is 20 mm, and the powder chamber is designed to be replaceable with the 12.7 mm, 20 mm and 30 mm type chamber. The test results showed the wide range of fragment velocity from 400 to 2000 m/s, included the fragment velocity requirement of the fragment impact test(alternate procedure #1) in MIL-STD-2105B. The stability of the bullet trajectory was checked by test shots and the structural safety of the system has been confirmed through the stress analysis and the interior ballistics analysis of the barrel.

• 한국군사과학기술학회지
• /
• 제15권5호
• /
• pp.712-719
• /
• 2012

Penetrator with enhanced lateral effect(PELE) is a newconcept projectile, without dynamite and fuze. It consists of high-density jacket, closed at its rear end and filled with a low-density filling material. To study the explosion characteristics of PELE, by AUTODYN-3D code, the calculation models of projectile body and bullet target are established and the process of penetrating aluminum-2024 alloy target of PELE is simulated, and the scattering characteristics after penetrating aluminum-2024 alloy target of PELE are studied by different initial velocity. The explicit finite element analysis of PELE fragmentation was implemented with stochastic failure criterion in AUTODYN-3D code. As expansion of filling, the fragments were obtained velocities and dispersed laterally and further more enhancing the damage area largely. The number and shape of the PELE fragments were different depend on impact velocity and incidence angle of filling which fragment generated during penetration and lateral dispersion process.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 춘계 학술대회
• /
• pp.56-66
• /
• 2005

In response to the increasing emphasis being placed on the importance of international cooperation as part of global efforts to cope with growing non proliferation, and security, concerns in the nuclear field, the Director General of the International Atomic Energy Agency (IAEA), Mohamed ElBaradei, appointed an international group of experts to consider possible multilateral approaches to the nuclear fuel cycle. The mandate of the Expert Group was three fold: ${\bullet}$ To identify and provide an analysis of issues and options relevant to multilateral approaches to the front and back ends of the nuclear fuel cycle; ${\bullet}$ To provide an overview of the policy, legal, security, economic, institutional and technological incentives and disincentives for cooperation in multilateral arrangements for the front and back ends of the nuclear fuel cycle; and ${\bullet}$ To provide a brief review of the historical and current experiences and analyses relating to multilateral fuel cycle arrangements relevant to the work of the Expert Group. The overall purpose was to assess MNAs in the framework of a double objective: strengthening the international nuclear non proliferation regime and making the peaceful uses of nuclear energy more economical and attractive. The Group identifies options for MNAs - options in terms of policy, institutional and legal factors - for those parts of the nuclear fuel cycle of greatest sensitivity from the point of view of proliferation risk. It also reflects the Groups deliberations on the corresponding benefits and disadvantages (pros and cons) of the various options and approaches. Although the Expert Group was able to agree to forward the resulting report to the Director General, it is important to note that the report does not reflect agreement by all of the experts on any of the options, nor a consensus assessment of their respective value. It is intended only to present options for MNAs, and to reflect on the range of considerations which could impact on the desirability and feasibility of those options.

• 문화기술의 융합
• /
• 제9권3호
• /
• pp.683-688
• /
• 2023

게임이나 가상현실에서 차세대 무기를 사용한 콘텐츠가 지속적으로 등장하고 있다. 스토리 전개의 상황에서, 소총과 탄환의 고유한 특성에 따라 목표물의 탄흔의 흔적이 다르게 관찰된다. 또한 범죄 과학수사 중 Forensic ballistics을 활용하여 범죄 흔적을 수사하는 일례도 존재한다. 이 과정 속에서 Ballistic Coefficient와 탄도에 의한 cavity 사이의 관계를 파악하는 일은 매우 중요하다. 본문에서는 modified Bresenham's line algorithm을 이용하여 게임이나 가상현실에서 현실감을 높여줄 수 있는 물리기반 공동 시뮬레이션을 제안하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1998년도 제11회 학술강연회논문집
• /
• pp.29-29
• /
• 1998

실전 배치되어 운용 중인 무기체계는 여러 형태의 사고 위험이 항상 존재한다 이중에서도 특히 항공기나 함정에서 발생하는 사고는 그 피해가 막대하게 커질 수도 있어 항공기나 함정 자체에 위협을 줄 수도 있다. 이러한 사고위험으로부터 인적, 물적 자원을 보호하기 위하여 둔감탄약(Insensitive Munitions)에 대한 인식이 높아지고 있으며, 아울러 이러한 무기 체계를 효과적으로 시험 평가하는 규격들이 검토되기 시작하여 1991년에 "Hazards Assesment Tests for Non-Nuclear Ordnance, DoD-STD-2105"를 기초로 한 MIL-STD-2105B가 채택되었다. 본 논문에서는 MIL-STD-2105B의 해석과 그에 따른 둔감탄약 시험에 포함되는 Bullet Impact Test, Fast Cookoff Test, Slow Cookoff Test, Fragment Impact Test, Sympathetic Detonation Test 등의 시험들의 세부적인 시험방법과 그 결과에 대한 판정 기준을 서술하였다. 또한 유도무기의 추진기관을 모델로 하여 둔감탄약 시험의 기준을 제시하였고 이 시험을 통과하기 위하여 향후 연구, 개발하여야 할 분야를 서술하였다.

• 한국군사과학기술학회지
• /
• 제17권3호
• /
• pp.378-386
• /
• 2014

In this paper, safety evaluation method simulating battlefield environment was studied to verify military operability of commercial lithium secondary battery. Based on the MIL-STD-2105D and STANAG standards, safety tests of lithium secondary battery module were conducted, such as bullet impact, fragment impact, fast cook-off and slow cook-off. All results satisfied the safety evaluation criteria, founded on military standard. It suggests that the lithium secondary module has high potential to be applied in a military power source. The safety evaluation methods developed in this paper can be valuable to propose the new military standards for commercial lithium secondary batteries.

• 대한기계학회논문집B
• /
• 제38권6호
• /
• pp.525-538
• /
• 2014

무기체계 개발에서 예상치 못한 고속의 총탄 충격을 받았을 때 반응 시스템의 폭발 반응을 예측하는 것은 안정성 확보를 위하여 매우 중요하다. 본 연구에서는 LX-17(92.5% TATB, 7.5% Kel-F)과 AP 기반의 고체 추진제(88% AP, 12% HTPB)가 충전된 반응 시스템에 한계 속도로 충돌하는 총탄 충격을 가했을 경우 발생하는 폭굉 현상 및 파괴 거동을 I&G 모델이 적용된 2차원 하이드로 수치해석을 통해 규명하고자 하였다. 해석 결과, LX-17의 경우 충격-폭굉 천이 현상(SDT)이 주요한 메커니즘으로 작용한 반면 고체 추진제는 상대적으로 안정한 모습을 보였다. 즉, 시스템의 파괴는 내부 압력의 급격한 증가와 격렬한 화학반응을 동반하는 고에너지 물질의 폭굉 현상이 그 원인이며, 폭발등급이 낮은 경우에는 고속 충돌에도 발화되지 않아 커버가 완전 파쇄에 이르지 않는 것으로 관찰되었다.

• 한국CDE학회논문집
• /
• 제19권4호
• /
• pp.340-346
• /
• 2014

There are many factors that contribute to hit probability of the gun shot of ground combat vehicles. Aiming accuracy is mainly affected by the dynamic state of the vehicle. The stabilization error of the turret under system vibration is one of the major factors that affect the aiming accuracy. The vibration of the vehicle is affected by both the state of the road and the speed of the vehicle. This paper analyzes the aiming accuracy of the gun equipped on the GCV when the vehicle drives on the different roads and at different speed. The vertical displacement and the pitch angle of the gun are calculated and the impact points of the target are calculated. Distribution of the impact points on the target is greatly influenced by the pitch rotation rather than vertical displacement. And this aiming errors result in the errors of point of impacts on the target after the bullet flies through the air under trajectory equations. The GCV is modeled using a half-car model with 6 D.O.F. and the specifications of the M2 machine gun are used in trajectory calculation simulation and the target is located in 1000 m away from the gun.